fltCurCfgTcpRateMaxConn

ALTEON-CHEETAH-LAYER4-MIB · .1.3.6.1.4.1.1872.2.5.4.1.2.2.1.47
MIB view Table view

Object

column Integer32 
Set maximum connections (number of connections in units of 10)
for TCP connection rate limiting.  In the case of ICMP and UDP,
 this is the maximum packets (number of packets in units of 10).

Context

MIB
ALTEON-CHEETAH-LAYER4-MIB
OID
.1.3.6.1.4.1.1872.2.5.4.1.2.2.1.47
Type
column
Access
readonly
Status
current
Parent
fltCurCfgTableEntry
Table
fltCurCfgTable
Siblings
76

Syntax

Integer32

Values & Constraints

Object Constraints
range: 0-255

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
fltCurCfgIndx
The filtering table index.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.1872.2.5.4.1.2.2.1.1
fltCurCfgRangeHighDstPort
The higher destination TCP/UDP port number to be filtered. It applies only when protocol defined in fltCurCfgProtocol is UDP or TCP. '0' means no filtering.
columnInteger32.1.3.6.1.4.1.1872.2.5.4.1.2.2.1.10
fltCurCfgAction
The action for the filtering rule.
columnEnumeration.1.3.6.1.4.1.1872.2.5.4.1.2.2.1.11
fltCurCfgRedirPort
The real server port number used for redirection.
columnInteger32.1.3.6.1.4.1.1872.2.5.4.1.2.2.1.12
fltCurCfgRedirGroup
The real server group to be redirected to.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.1872.2.5.4.1.2.2.1.13
fltCurCfgLog
Enable or disable logging.
columnEnumeration.1.3.6.1.4.1.1872.2.5.4.1.2.2.1.14
fltCurCfgState
The state of this filtering rule.
columnEnumeration.1.3.6.1.4.1.1872.2.5.4.1.2.2.1.15
fltCurCfgNat
The selection of destination or source or multicast for network address translation.
columnEnumeration.1.3.6.1.4.1.1872.2.5.4.1.2.2.1.16
fltCurCfgCache
Enable or disable caching sessions that match filter.
columnEnumeration.1.3.6.1.4.1.1872.2.5.4.1.2.2.1.17
fltCurCfgInvert
Turn the invert logic on or off for the filter entry.
columnEnumeration.1.3.6.1.4.1.1872.2.5.4.1.2.2.1.18
fltCurCfgClientProxy
Enable or disable client proxy.
columnEnumeration.1.3.6.1.4.1.1872.2.5.4.1.2.2.1.19
fltCurCfgSrcIp
The source IP address to be filtered.
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.1872.2.5.4.1.2.2.1.2
fltCurCfgTcpAck
Enable or disable filtering on matching TCP ACK and RST flag.
columnEnumeration.1.3.6.1.4.1.1872.2.5.4.1.2.2.1.20
fltCurCfgSrcMac
The source MAC address to be filtered.
columnSNMPv2-TCPhysAddress.1.3.6.1.4.1.1872.2.5.4.1.2.2.1.22
fltCurCfgDstMac
The Destination MAC address to be filtered.
columnSNMPv2-TCPhysAddress.1.3.6.1.4.1.1872.2.5.4.1.2.2.1.23
fltCurCfgFtpNatActive
Enable or disable FTP NAT for active ftp only.
columnEnumeration.1.3.6.1.4.1.1872.2.5.4.1.2.2.1.24
fltCurCfgAclTcpUrg
Enable or disable TCP URG packet.
columnEnumeration.1.3.6.1.4.1.1872.2.5.4.1.2.2.1.25
fltCurCfgAclTcpAck
Enable or disable TCP ACK packet.
columnEnumeration.1.3.6.1.4.1.1872.2.5.4.1.2.2.1.26
fltCurCfgAclTcpPsh
Enable or disable TCP PSH packet.
columnEnumeration.1.3.6.1.4.1.1872.2.5.4.1.2.2.1.27
fltCurCfgAclTcpRst
Enable or disable TCP RST packet.
columnEnumeration.1.3.6.1.4.1.1872.2.5.4.1.2.2.1.28
fltCurCfgAclTcpSyn
Enable or disable TCP SYN packet.
columnEnumeration.1.3.6.1.4.1.1872.2.5.4.1.2.2.1.29
fltCurCfgSrcIpMask
The source IP sub-net mask for filtering.
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.1872.2.5.4.1.2.2.1.3
fltCurCfgAclTcpFin
Enable or disable TCP FIN packet.
columnEnumeration.1.3.6.1.4.1.1872.2.5.4.1.2.2.1.30
fltCurCfgAclIcmp
ICMP type to be filtered. A ICMP type of 255 indicates 'any'
columnInteger32.1.3.6.1.4.1.1872.2.5.4.1.2.2.1.31
fltCurCfgAclIpOption
Enable or disable IP option matching.
columnEnumeration.1.3.6.1.4.1.1872.2.5.4.1.2.2.1.32
fltCurCfgBwmContract
Filt default BW contract number.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.1872.2.5.4.1.2.2.1.33
fltCurCfgAclIpTos
The IP TOS value to be filtered.
columnInteger32.1.3.6.1.4.1.1872.2.5.4.1.2.2.1.34
fltCurCfgAclIpTosMask
The IP TOS mask for filtering.
columnInteger32.1.3.6.1.4.1.1872.2.5.4.1.2.2.1.35
fltCurCfgAclIpTosNew
The new IP TOS value to over-write when filtering fired.
columnInteger32.1.3.6.1.4.1.1872.2.5.4.1.2.2.1.36
fltCurCfgFwlb
Enable or disable filtering on firewall redirect hash method.
columnEnumeration.1.3.6.1.4.1.1872.2.5.4.1.2.2.1.37
fltCurCfgNatTimeout
The NAT session timeout. The timeout value should be an even number between 4 and 32768.
columnInteger32.1.3.6.1.4.1.1872.2.5.4.1.2.2.1.38
fltCurCfgLinklb
Enable or disable WAN link load balancing.
columnEnumeration.1.3.6.1.4.1.1872.2.5.4.1.2.2.1.39
fltCurCfgDstIp
The destination IP address to be filtered.
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.1872.2.5.4.1.2.2.1.4
fltCurCfgWapRadiusSnoop
Enable or disable WAP RADIUS snooping.
columnEnumeration.1.3.6.1.4.1.1872.2.5.4.1.2.2.1.40
fltCurCfgSrcIpMac
Set a flag indicating whether filtering should be based on the source IP address or the source MAC address field.
columnEnumeration.1.3.6.1.4.1.1872.2.5.4.1.2.2.1.41
fltCurCfgDstIpMac
Set a flag indicating whether filtering should be based on the destination IP address or the destination MAC address field.
columnEnumeration.1.3.6.1.4.1.1872.2.5.4.1.2.2.1.42
fltCurCfgIdslbHash
Set hash parameter for intrusion detection server load balancing.
columnEnumeration.1.3.6.1.4.1.1872.2.5.4.1.2.2.1.43
fltCurCfgVlan
Set the VLAN assoicated with the filter.
columnInteger32.1.3.6.1.4.1.1872.2.5.4.1.2.2.1.44
fltCurCfgName
The name of the filter.
columnOctetString.1.3.6.1.4.1.1872.2.5.4.1.2.2.1.45
fltCurCfgTcpRateLimit
Enable or disable protocol rate limiting.
columnEnumeration.1.3.6.1.4.1.1872.2.5.4.1.2.2.1.46
fltCurCfgHash
Set hash parameter for the filter.
columnEnumeration.1.3.6.1.4.1.1872.2.5.4.1.2.2.1.48
fltCurCfgDstIpMask
The destination IP sub-net mask for filtering.
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.1872.2.5.4.1.2.2.1.5
fltCurCfgLayer7DenyState
Enable or disable layer 7 deny filtering.
columnEnumeration.1.3.6.1.4.1.1872.2.5.4.1.2.2.1.50
fltCurCfgLayer7DenyUrlBmap
The URL strings selected for Layer 7 deny filters. The selected URL strings are presented in a bitmap format. in receiving order: OCTET 1 OCTE…
columnOctetString.1.3.6.1.4.1.1872.2.5.4.1.2.2.1.51
fltCurCfgGotoFilter
The filter ID for GOTO action in the current config.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.1872.2.5.4.1.2.2.1.52
fltCurCfgRadiusWapPersist
Enable or disable Radius/WAP persistence.
columnEnumeration.1.3.6.1.4.1.1872.2.5.4.1.2.2.1.53
fltCurCfgPbind
Enable or disable filter persistent binding.
columnEnumeration.1.3.6.1.4.1.1872.2.5.4.1.2.2.1.54
fltCurCfgTimeWindow
The time window for protocol rate limiting (in seconds).
columnInteger32.1.3.6.1.4.1.1872.2.5.4.1.2.2.1.55
fltCurCfgHoldDuration
The hold down duration for protocol rate limiting (in minutes).
columnInteger32.1.3.6.1.4.1.1872.2.5.4.1.2.2.1.56
fltCurCfgPatternMatch
Enable or disable binary pattern matching.
columnEnumeration.1.3.6.1.4.1.1872.2.5.4.1.2.2.1.57
fltCurCfgLayer7DenyMatchAll
Enable or disable match-all criteria for L7 deny string matching.
columnEnumeration.1.3.6.1.4.1.1872.2.5.4.1.2.2.1.58
fltCurCfgProxyIp
The client proxy IP address for NAT and REDIR filter.
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.1872.2.5.4.1.2.2.1.59
fltCurCfgProtocol
The protocol to be filtered.
columnInteger32.1.3.6.1.4.1.1872.2.5.4.1.2.2.1.6
fltCurCfgLayer7ParseAll
Enable or disable layer 7 lookup (parsing) of all packets.
columnEnumeration.1.3.6.1.4.1.1872.2.5.4.1.2.2.1.60
fltCurCfgSecurityParseAll
Enable or disable pattern string lookup (parsing) of all packets.
columnEnumeration.1.3.6.1.4.1.1872.2.5.4.1.2.2.1.61
fltCurCfgPatternMatchGroupBmap
The pattern match group. The pattern match groups are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx x…
columnOctetString.1.3.6.1.4.1.1872.2.5.4.1.2.2.1.62
fltCurCfg8021pBitsValue
The 802.1p bits value to match.
columnInteger32.1.3.6.1.4.1.1872.2.5.4.1.2.2.1.63
fltCurCfg8021pBitsMatch
Enable or disable matching on 802.1p bits in the packets.
columnEnumeration.1.3.6.1.4.1.1872.2.5.4.1.2.2.1.64
fltCurCfgAclIpLength
Set the IP maximum packet length in bytes. A value can be either 0 which indicates 'any' length or between 64 and 65535.
columnInteger32.1.3.6.1.4.1.1872.2.5.4.1.2.2.1.65
fltCurCfgIdsGroup
The real server group for IDS load balancing. A value of 0 indicates 'none'.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.1872.2.5.4.1.2.2.1.66
fltCurCfgEgressPip
Enable or disable pip selection based on egress port/vlan.
columnEnumeration.1.3.6.1.4.1.1872.2.5.4.1.2.2.1.67
fltCurCfgDbind
Enable or disable filter delayed binding.
columnEnumeration.1.3.6.1.4.1.1872.2.5.4.1.2.2.1.68
fltCurCfgRevBwmContract
Filt reverse session BWM contract number.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.1872.2.5.4.1.2.2.1.69
fltCurCfgRangeHighSrcPort
The higher source TCP/UDP port number to be filtered. It applies only when protocol defined in fltCurCfgProtocol is UDP or TCP. '0' means no filtering.
columnInteger32.1.3.6.1.4.1.1872.2.5.4.1.2.2.1.7
fltCurCfgReverse
Enable or disable creating session for reverse side traffic.
columnEnumeration.1.3.6.1.4.1.1872.2.5.4.1.2.2.1.70
fltCurCfgParseChn
Enable or disable chained pgroup match criteria for l7 filtering.
columnEnumeration.1.3.6.1.4.1.1872.2.5.4.1.2.2.1.71
fltCurCfgRtpBwmContract
BWM contract for SIP RTP traffic.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.1872.2.5.4.1.2.2.1.72
fltCurCfgSipParsing
Enable or disable SIP NAT.
columnEnumeration.1.3.6.1.4.1.1872.2.5.4.1.2.2.1.73
fltCurCfgSessionMirror
Enable or disable session mirroring.
columnEnumeration.1.3.6.1.4.1.1872.2.5.4.1.2.2.1.74
fltCurCfgIpVer
The type of IP address.
columnEnumeration.1.3.6.1.4.1.1872.2.5.4.1.2.2.1.75
fltCurCfgIpv6Sip
The source IPv6 address to be filtered. Address should be 4-byte hexadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:…
columnOctetString.1.3.6.1.4.1.1872.2.5.4.1.2.2.1.76
fltCurCfgIpv6Sprefix
The prefix length associated with source IP address .
columnInteger32.1.3.6.1.4.1.1872.2.5.4.1.2.2.1.77
fltCurCfgIpv6Dip
The destination IPv6 address to be filtered. Address should be 4-byte hexadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx…
columnOctetString.1.3.6.1.4.1.1872.2.5.4.1.2.2.1.78
fltCurCfgIpv6Dprefix
The prefix length associated with destination IP address .
columnInteger32.1.3.6.1.4.1.1872.2.5.4.1.2.2.1.79
fltCurCfgRangeLowSrcPort
The lower source TCP/UDP port number to be filtered. It applies only when protocol defined in fltCurCfgProtocol is UDP or TCP. '0' means no filtering.
columnInteger32.1.3.6.1.4.1.1872.2.5.4.1.2.2.1.8
fltCurCfgRangeLowDstPort
The lower destination TCP/UDP port number to be filtered. It applies only when protocol defined in fltCurCfgProtocol is UDP or TCP. '0' means no filtering.
columnInteger32.1.3.6.1.4.1.1872.2.5.4.1.2.2.1.9