fltCurCfgNat
ALTEON-CHEETAH-LAYER4-MIB ·
.1.3.6.1.4.1.1872.2.5.4.1.2.2.1.16
Object
column
Enumeration
The selection of destination or source for network address translation.
Context
- MIB
- ALTEON-CHEETAH-LAYER4-MIB
- OID
.1.3.6.1.4.1.1872.2.5.4.1.2.2.1.16- Type
- column
- Access
- readonly
- Status
- current
- Parent
- fltCurCfgTableEntry
- Table
- fltCurCfgTable
- Siblings
- 76
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | destination-address |
2 | source-address |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| fltCurCfgIndx The filtering table index. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.1872.2.5.4.1.2.2.1.1 |
| fltCurCfgRangeHighDstPort The higher destination TCP/UDP port number to be filtered. It applies
only when protocol defined in fltCurCfgProtocol is UDP or TCP.
'0' means no filtering. | column | Integer32 | .1.3.6.1.4.1.1872.2.5.4.1.2.2.1.10 |
| fltCurCfgAction The action for the filtering rule. | column | Enumeration | .1.3.6.1.4.1.1872.2.5.4.1.2.2.1.11 |
| fltCurCfgRedirPort The real server port number used for redirection. | column | Integer32 | .1.3.6.1.4.1.1872.2.5.4.1.2.2.1.12 |
| fltCurCfgRedirGroup The real server group to be redirected to. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.1872.2.5.4.1.2.2.1.13 |
| fltCurCfgLog Enable or disable logging. | column | Enumeration | .1.3.6.1.4.1.1872.2.5.4.1.2.2.1.14 |
| fltCurCfgState The state of this filtering rule. | column | Enumeration | .1.3.6.1.4.1.1872.2.5.4.1.2.2.1.15 |
| fltCurCfgCache Enable or disable caching sessions that match filter. | column | Enumeration | .1.3.6.1.4.1.1872.2.5.4.1.2.2.1.17 |
| fltCurCfgInvert Turn the invert logic on or off for the filter entry. | column | Enumeration | .1.3.6.1.4.1.1872.2.5.4.1.2.2.1.18 |
| fltCurCfgClientProxy Enable or disable client proxy. | column | Enumeration | .1.3.6.1.4.1.1872.2.5.4.1.2.2.1.19 |
| fltCurCfgSrcIp The source IP address to be filtered. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.1872.2.5.4.1.2.2.1.2 |
| fltCurCfgTcpAck Enable or disable filtering on matching TCP ACK and RST flag. | column | Enumeration | .1.3.6.1.4.1.1872.2.5.4.1.2.2.1.20 |
| fltCurCfgSrcMac The source MAC address to be filtered. | column | SNMPv2-TCPhysAddress | .1.3.6.1.4.1.1872.2.5.4.1.2.2.1.22 |
| fltCurCfgDstMac The Destination MAC address to be filtered. | column | SNMPv2-TCPhysAddress | .1.3.6.1.4.1.1872.2.5.4.1.2.2.1.23 |
| fltCurCfgFtpNatActive Enable or disable FTP NAT for active ftp only. | column | Enumeration | .1.3.6.1.4.1.1872.2.5.4.1.2.2.1.24 |
| fltCurCfgAclTcpUrg Enable or disable TCP URG packet. | column | Enumeration | .1.3.6.1.4.1.1872.2.5.4.1.2.2.1.25 |
| fltCurCfgAclTcpAck Enable or disable TCP ACK packet. | column | Enumeration | .1.3.6.1.4.1.1872.2.5.4.1.2.2.1.26 |
| fltCurCfgAclTcpPsh Enable or disable TCP PSH packet. | column | Enumeration | .1.3.6.1.4.1.1872.2.5.4.1.2.2.1.27 |
| fltCurCfgAclTcpRst Enable or disable TCP RST packet. | column | Enumeration | .1.3.6.1.4.1.1872.2.5.4.1.2.2.1.28 |
| fltCurCfgAclTcpSyn Enable or disable TCP SYN packet. | column | Enumeration | .1.3.6.1.4.1.1872.2.5.4.1.2.2.1.29 |
| fltCurCfgSrcIpMask The source IP sub-net mask for filtering. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.1872.2.5.4.1.2.2.1.3 |
| fltCurCfgAclTcpFin Enable or disable TCP FIN packet. | column | Enumeration | .1.3.6.1.4.1.1872.2.5.4.1.2.2.1.30 |
| fltCurCfgAclIcmp ICMP type to be filtered. A ICMP type of 255 indicates 'any' | column | Integer32 | .1.3.6.1.4.1.1872.2.5.4.1.2.2.1.31 |
| fltCurCfgAclIpOption Enable or disable IP option matching. | column | Enumeration | .1.3.6.1.4.1.1872.2.5.4.1.2.2.1.32 |
| fltCurCfgBwmContract Filt default BW contract number. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.1872.2.5.4.1.2.2.1.33 |
| fltCurCfgAclIpTos The IP TOS value to be filtered. | column | Integer32 | .1.3.6.1.4.1.1872.2.5.4.1.2.2.1.34 |
| fltCurCfgAclIpTosMask The IP TOS mask for filtering. | column | Integer32 | .1.3.6.1.4.1.1872.2.5.4.1.2.2.1.35 |
| fltCurCfgAclIpTosNew The new IP TOS value to over-write when filtering fired. | column | Integer32 | .1.3.6.1.4.1.1872.2.5.4.1.2.2.1.36 |
| fltCurCfgFwlb Enable or disable filtering on firewall redirect hash method. | column | Enumeration | .1.3.6.1.4.1.1872.2.5.4.1.2.2.1.37 |
| fltCurCfgNatTimeout The NAT session timeout. The timeout value should be an even number
between 4 and 32768. | column | Integer32 | .1.3.6.1.4.1.1872.2.5.4.1.2.2.1.38 |
| fltCurCfgLinklb Enable or disable WAN link load balancing. | column | Enumeration | .1.3.6.1.4.1.1872.2.5.4.1.2.2.1.39 |
| fltCurCfgDstIp The destination IP address to be filtered. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.1872.2.5.4.1.2.2.1.4 |
| fltCurCfgWapRadiusSnoop Enable or disable WAP RADIUS snooping. | column | Enumeration | .1.3.6.1.4.1.1872.2.5.4.1.2.2.1.40 |
| fltCurCfgSrcIpMac Set a flag indicating whether filtering should be based on the
source IP address or the source MAC address field. | column | Enumeration | .1.3.6.1.4.1.1872.2.5.4.1.2.2.1.41 |
| fltCurCfgDstIpMac Set a flag indicating whether filtering should be based on the
destination IP address or the destination MAC address field. | column | Enumeration | .1.3.6.1.4.1.1872.2.5.4.1.2.2.1.42 |
| fltCurCfgIdslbHash Set hash parameter for intrusion detection server load balancing. | column | Enumeration | .1.3.6.1.4.1.1872.2.5.4.1.2.2.1.43 |
| fltCurCfgVlan Set the VLAN assoicated with the filter. | column | Integer32 | .1.3.6.1.4.1.1872.2.5.4.1.2.2.1.44 |
| fltCurCfgName The name of the filter. | column | OctetString | .1.3.6.1.4.1.1872.2.5.4.1.2.2.1.45 |
| fltCurCfgTcpRateLimit Enable or disable protocol rate limiting. | column | Enumeration | .1.3.6.1.4.1.1872.2.5.4.1.2.2.1.46 |
| fltCurCfgTcpRateMaxConn Set maximum connections (number of connections in units of 10)
for TCP connection rate limiting. In the case of ICMP and UDP,
this is the maximum packets (number of packets in u… | column | Integer32 | .1.3.6.1.4.1.1872.2.5.4.1.2.2.1.47 |
| fltCurCfgHash Set hash parameter for the filter. | column | Enumeration | .1.3.6.1.4.1.1872.2.5.4.1.2.2.1.48 |
| fltCurCfgDstIpMask The destination IP sub-net mask for filtering. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.1872.2.5.4.1.2.2.1.5 |
| fltCurCfgLayer7DenyState Enable or disable layer 7 deny filtering. | column | Enumeration | .1.3.6.1.4.1.1872.2.5.4.1.2.2.1.50 |
| fltCurCfgLayer7DenyUrlBmap The URL strings selected for Layer 7 deny filters.
The selected URL strings are presented in a bitmap format.
in receiving order:
OCTET 1 OCTE… | column | OctetString | .1.3.6.1.4.1.1872.2.5.4.1.2.2.1.51 |
| fltCurCfgGotoFilter The filter ID for GOTO action in the current config. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.1872.2.5.4.1.2.2.1.52 |
| fltCurCfgRadiusWapPersist Enable or disable Radius/WAP persistence. | column | Enumeration | .1.3.6.1.4.1.1872.2.5.4.1.2.2.1.53 |
| fltCurCfgPbind Enable or disable filter persistent binding. | column | Enumeration | .1.3.6.1.4.1.1872.2.5.4.1.2.2.1.54 |
| fltCurCfgTimeWindow The time window for protocol rate limiting (in seconds). | column | Integer32 | .1.3.6.1.4.1.1872.2.5.4.1.2.2.1.55 |
| fltCurCfgHoldDuration The hold down duration for protocol rate limiting (in minutes). | column | Integer32 | .1.3.6.1.4.1.1872.2.5.4.1.2.2.1.56 |
| fltCurCfgPatternMatch Enable or disable binary pattern matching. | column | Enumeration | .1.3.6.1.4.1.1872.2.5.4.1.2.2.1.57 |
| fltCurCfgLayer7DenyMatchAll Enable or disable match-all criteria for L7 deny string matching. | column | Enumeration | .1.3.6.1.4.1.1872.2.5.4.1.2.2.1.58 |
| fltCurCfgProxyIp The client proxy IP address for NAT and REDIR filter. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.1872.2.5.4.1.2.2.1.59 |
| fltCurCfgProtocol The protocol to be filtered. | column | Integer32 | .1.3.6.1.4.1.1872.2.5.4.1.2.2.1.6 |
| fltCurCfgLayer7ParseAll Enable or disable layer 7 lookup (parsing) of all packets. | column | Enumeration | .1.3.6.1.4.1.1872.2.5.4.1.2.2.1.60 |
| fltCurCfgSecurityParseAll Enable or disable pattern string lookup (parsing) of all packets. | column | Enumeration | .1.3.6.1.4.1.1872.2.5.4.1.2.2.1.61 |
| fltCurCfgPatternMatchGroupBmap The pattern match group.
The pattern match groups are presented in a bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx x… | column | OctetString | .1.3.6.1.4.1.1872.2.5.4.1.2.2.1.62 |
| fltCurCfg8021pBitsValue The 802.1p bits value to match. | column | Integer32 | .1.3.6.1.4.1.1872.2.5.4.1.2.2.1.63 |
| fltCurCfg8021pBitsMatch Enable or disable matching on 802.1p bits in the packets. | column | Enumeration | .1.3.6.1.4.1.1872.2.5.4.1.2.2.1.64 |
| fltCurCfgAclIpLength Set the IP maximum packet length in bytes. A value can be either 0
which indicates 'any' length or between 64 and 65535. | column | Integer32 | .1.3.6.1.4.1.1872.2.5.4.1.2.2.1.65 |
| fltCurCfgIdsGroup The real server group for IDS load balancing. A value of 0 indicates
'none'. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.1872.2.5.4.1.2.2.1.66 |
| fltCurCfgEgressPip Enable or disable pip selection based on egress port/vlan. | column | Enumeration | .1.3.6.1.4.1.1872.2.5.4.1.2.2.1.67 |
| fltCurCfgDbind Enable or disable filter delayed binding. | column | Enumeration | .1.3.6.1.4.1.1872.2.5.4.1.2.2.1.68 |
| fltCurCfgRevBwmContract Filt reverse session BWM contract number. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.1872.2.5.4.1.2.2.1.69 |
| fltCurCfgRangeHighSrcPort The higher source TCP/UDP port number to be filtered. It applies
only when protocol defined in fltCurCfgProtocol is UDP or TCP.
'0' means no filtering. | column | Integer32 | .1.3.6.1.4.1.1872.2.5.4.1.2.2.1.7 |
| fltCurCfgReverse Enable or disable creating session for reverse side traffic. | column | Enumeration | .1.3.6.1.4.1.1872.2.5.4.1.2.2.1.70 |
| fltCurCfgParseChn Enable or disable chained pgroup match criteria for l7 filtering. | column | Enumeration | .1.3.6.1.4.1.1872.2.5.4.1.2.2.1.71 |
| fltCurCfgRtpBwmContract BWM contract for SIP RTP traffic. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.1872.2.5.4.1.2.2.1.72 |
| fltCurCfgSipParsing Enable or disable SIP NAT. | column | Enumeration | .1.3.6.1.4.1.1872.2.5.4.1.2.2.1.73 |
| fltCurCfgSessionMirror Enable or disable session mirroring. | column | Enumeration | .1.3.6.1.4.1.1872.2.5.4.1.2.2.1.74 |
| fltCurCfgIpVer The type of IP address. | column | Enumeration | .1.3.6.1.4.1.1872.2.5.4.1.2.2.1.75 |
| fltCurCfgIpv6Sip The source IPv6 address to be filtered. Address should be 4-byte
hexadecimal colon notation.
Valid IPv6 address should be in any of the following forms
xxxx:xxxx:xxxx:xxxx:xxxx:… | column | OctetString | .1.3.6.1.4.1.1872.2.5.4.1.2.2.1.76 |
| fltCurCfgIpv6Sprefix The prefix length associated with source IP address . | column | Integer32 | .1.3.6.1.4.1.1872.2.5.4.1.2.2.1.77 |
| fltCurCfgIpv6Dip The destination IPv6 address to be filtered. Address should be 4-byte
hexadecimal colon notation.
Valid IPv6 address should be in any of the following forms
xxxx:xxxx:xxxx:xxxx… | column | OctetString | .1.3.6.1.4.1.1872.2.5.4.1.2.2.1.78 |
| fltCurCfgIpv6Dprefix The prefix length associated with destination IP address . | column | Integer32 | .1.3.6.1.4.1.1872.2.5.4.1.2.2.1.79 |
| fltCurCfgRangeLowSrcPort The lower source TCP/UDP port number to be filtered. It applies
only when protocol defined in fltCurCfgProtocol is UDP or TCP.
'0' means no filtering. | column | Integer32 | .1.3.6.1.4.1.1872.2.5.4.1.2.2.1.8 |
| fltCurCfgRangeLowDstPort The lower destination TCP/UDP port number to be filtered. It applies
only when protocol defined in fltCurCfgProtocol is UDP or TCP.
'0' means no filtering. | column | Integer32 | .1.3.6.1.4.1.1872.2.5.4.1.2.2.1.9 |