alFupProtocolVersion
ALLOT-MIB ·
.1.3.6.1.4.1.2603.5.2.6.25
Object
scalar
SNMPv2-SMIInteger32
Identification of FUP protocol version number that is supported by the device
Context
- MIB
- ALLOT-MIB
- OID
.1.3.6.1.4.1.2603.5.2.6.25- Type
- scalar
- Access
- readonly
- Status
- current
- Parent
- alGeneralSystem
- Siblings
- 28
Syntax
SNMPv2-SMIInteger32
- Source
- SNMPv2-SMIInteger32
- Base type
Integer32
Values & Constraints
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| alDateTime The item provides the ability to synchronize the reporting
system via SNMP | scalar | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.2603.5.2.6.1 |
| alSPTStatus Spanning tree status | scalar | AlEnableDisableNA | .1.3.6.1.4.1.2603.5.2.6.10 |
| alRedunduncyMode Choice of redundancy model | scalar | Enumeration | .1.3.6.1.4.1.2603.5.2.6.11 |
| alBoxSerialNumber Serial number of the box. Identifies the current
product instance. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.2603.5.2.6.12 |
| alSoftwareVersion Identification of the software version | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.2603.5.2.6.13 |
| alBackplaneVersion Backplane (hardware) version. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.2603.5.2.6.14 |
| alPosIfTable Configuration of POS. | table | - | .1.3.6.1.4.1.2603.5.2.6.15 |
| alRedundancyCap Bit-mask of the redundancy options,
depending of the hardware platform.
0x1 mask- parallel;
0x2 mask-serial;
0x4 mask- active | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2603.5.2.6.16 |
| alBypassUnit Enable/disable the usage of the bypass unit | scalar | AlEnableDisable | .1.3.6.1.4.1.2603.5.2.6.17 |
| alDeviceBWLimits | node | - | .1.3.6.1.4.1.2603.5.2.6.18 |
| alSystemCOC | node | - | .1.3.6.1.4.1.2603.5.2.6.19 |
| alTimeZone May be used for the reporting purposes. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.2603.5.2.6.2 |
| alInternalRedundancy | node | - | .1.3.6.1.4.1.2603.5.2.6.20 |
| alWebUpdate | node | - | .1.3.6.1.4.1.2603.5.2.6.21 |
| alUserDefinedSignature | node | - | .1.3.6.1.4.1.2603.5.2.6.22 |
| alAsymmetric | node | - | .1.3.6.1.4.1.2603.5.2.6.23 |
| alServiceActivation | node | - | .1.3.6.1.4.1.2603.5.2.6.24 |
| alPredictiveDPI | node | - | .1.3.6.1.4.1.2603.5.2.6.26 |
| alIPv6State State of IPv6 support in NE | scalar | AlEnableDisable | .1.3.6.1.4.1.2603.5.2.6.27 |
| alSelectiveBypass | node | - | .1.3.6.1.4.1.2603.5.2.6.28 |
| alTetherDetectState Enables tethering traffic detection in NE | scalar | AlEnableDisable | .1.3.6.1.4.1.2603.5.2.6.29 |
| alIfXTable Allot's extansion to the interface table | table | - | .1.3.6.1.4.1.2603.5.2.6.3 |
| alSystemNetwork | node | - | .1.3.6.1.4.1.2603.5.2.6.4 |
| alSystemStatus | node | - | .1.3.6.1.4.1.2603.5.2.6.5 |
| alSystemSecurity | node | - | .1.3.6.1.4.1.2603.5.2.6.6 |
| alIpXAddrTable Extension to ipIfXTable - serves for managing the IP adresses (add/remove)
and contains one additional parameter - VLAN tag | table | - | .1.3.6.1.4.1.2603.5.2.6.7 |
| alMode Controls the working mode of box:
1- regular,
2-TAP,
3-nonApplicable | scalar | Enumeration | .1.3.6.1.4.1.2603.5.2.6.8 |
| alLearningBridge Status of learning for the bridge function (on/off/NA). | scalar | AlEnableDisableNA | .1.3.6.1.4.1.2603.5.2.6.9 |