ccDetailsOutSetupCalledSub
ALLIEDTELESYN-MIB ·
.1.3.6.1.4.1.207.8.4.4.4.37.1.1.21
Object
column
mandatory
r/w
Enumeration
The called subaddress information placed into outgoing SETUP messages when this call details is used to generate an outgoing call. The value 'off' means that no called subaddress information in placed in the SETUP message. The value 'local' means that the call name from the call details entry is placed in the SETUP message. The value 'remote' means that the remote call name from the call details entry is placed in the SETUP message. Note that the action of this object is overridden by the value of the object ccDetailsOutSubaddress.
Context
- MIB
- ALLIEDTELESYN-MIB
- OID
.1.3.6.1.4.1.207.8.4.4.4.37.1.1.21- Type
- column
- Access
- readwrite
- Status
- mandatory
- Parent
- ccDetailsEntry
- Table
- ccDetailsTable
- Siblings
- 41
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | off |
2 | local |
3 | remote |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| ccDetailsIndex mandatory The index of the call details entry in the call details table. When an entry is created in this table, the index
does not have to be written. However, to reference the values that… | column | Integer32 | .1.3.6.1.4.1.207.8.4.4.4.37.1.1.1 |
| ccDetailsHoldupTime mandatory The time, in seconds, that active calls created from this call details should be held up after initial
activation. The call will be held up for at least this time, unless cleared … | column | Integer32 | .1.3.6.1.4.1.207.8.4.4.4.37.1.1.10 |
| ccDetailsPreferredIfIndex mandatory The ifIndex of an ISDN interface on this router which is the preferred ISDN interface on which to make an
outgoing call using this call details entry. The ifIndex, if not 0, shoul… | column | InterfaceIndexOrZero | .1.3.6.1.4.1.207.8.4.4.4.37.1.1.11 |
| ccDetailsRequiredIfIndex mandatory The ifIndex of an ISDN interface on this router which is the required ISDN interface on which to make an
outgoing call using this call details entry. The ifIndex, if not 0, must r… | column | InterfaceIndexOrZero | .1.3.6.1.4.1.207.8.4.4.4.37.1.1.12 |
| ccDetailsPriority mandatory The priority of calls generated from this call details entry. The priority determines whether calls can be bumped
for higher priority calls. The value of priority falls into range… | column | Integer32 | .1.3.6.1.4.1.207.8.4.4.4.37.1.1.13 |
| ccDetailsRetryT1 mandatory The time in seconds between retries of calls generated from this call details entry. | column | Integer32 | .1.3.6.1.4.1.207.8.4.4.4.37.1.1.14 |
| ccDetailsRetryN1 mandatory The number of retries in a retry group for calls generated from this call details entry. Note that the default
value means that by default the call will not be retried. | column | Integer32 | .1.3.6.1.4.1.207.8.4.4.4.37.1.1.15 |
| ccDetailsRetryT2 mandatory The time in seconds between retry groups for retries of calls generated from this call details entry. | column | Integer32 | .1.3.6.1.4.1.207.8.4.4.4.37.1.1.16 |
| ccDetailsRetryN2 mandatory The number of retry groups for calls generated from this call details entry. Note that the default value means
that by default no retry groups will be attempted. | column | Integer32 | .1.3.6.1.4.1.207.8.4.4.4.37.1.1.17 |
| ccDetailsKeepup mandatory A flag indicating whether calls generated from this call details entry should be kept up always. Inspection of
this flag takes place when a call is cleared from an external source… | column | Enumeration | .1.3.6.1.4.1.207.8.4.4.4.37.1.1.18 |
| ccDetailsOutSetupCli mandatory The CLI information placed into outgoing SETUP messages when this call details is used to generate an outgoing
call. The value 'off' means that no CLI information in placed in the… | column | Enumeration | .1.3.6.1.4.1.207.8.4.4.4.37.1.1.19 |
| ccDetailsName mandatory The name of the ISDN call details. This must be unique for all ISDN call details, when comparisons are done
ignoring the case of letters. Valid characters in the ISDN call name in… | column | OctetString | .1.3.6.1.4.1.207.8.4.4.4.37.1.1.2 |
| ccDetailsOutSetupUser mandatory The user-user information placed into outgoing SETUP messages when this call details is used to generate an
outgoing call. The value 'off' means that no user-user information in p… | column | Enumeration | .1.3.6.1.4.1.207.8.4.4.4.37.1.1.20 |
| ccDetailsOutSubaddress mandatory This object gives a way to override the called subaddress information placed into outgoing SETUP messages when
this call details is used to generate an outgoing call, as given by … | column | OctetString | .1.3.6.1.4.1.207.8.4.4.4.37.1.1.22 |
| ccDetailsCallback mandatory A flag indicating whether or not to call back the caller when an incoming call is generated from this call
details entry. If set to 'yes', the incoming call will be cleared, and a… | column | Enumeration | .1.3.6.1.4.1.207.8.4.4.4.37.1.1.23 |
| ccDetailsCallbackDelay mandatory The time, in tenths of a second, which the router will wait after clearing an incoming call whose call details
entry specified that the caller should be called back before making … | column | Integer32 | .1.3.6.1.4.1.207.8.4.4.4.37.1.1.24 |
| ccDetailsInSetupCalledSubSearch mandatory Determines whether this call details entry is used in a search of call details for an incoming call based on the
contents of the called subaddress information in the incoming SETU… | column | Enumeration | .1.3.6.1.4.1.207.8.4.4.4.37.1.1.25 |
| ccDetailsInSetupUserSearch mandatory Determines whether this call details entry is used in a search of call details for an incoming call based on the
contents of the user-user information in the incoming SETUP messag… | column | Enumeration | .1.3.6.1.4.1.207.8.4.4.4.37.1.1.26 |
| ccDetailsInSetupCliSearch mandatory Determines whether this call details entry is used in a search of call details for an incoming call based on the
contents of the calling number information in the incoming SETUP m… | column | Enumeration | .1.3.6.1.4.1.207.8.4.4.4.37.1.1.27 |
| ccDetailsInSetupCliSearchList mandatory If the ccDetailsInSetupCliSearch object is set to 'list', this
object gives the index of the CLI list to search. The value of
CLI list indices is 1..100. The value 0 is returned w… | column | Integer32 | .1.3.6.1.4.1.207.8.4.4.4.37.1.1.28 |
| ccDetailsInAnyFlag mandatory Determines whether this call details entry will match any incoming call. After all searched for incoming calls
have been carried out based on called subaddress, user-user informat… | column | Enumeration | .1.3.6.1.4.1.207.8.4.4.4.37.1.1.29 |
| ccDetailsRemoteName mandatory The remote ISDN call name. This name can be referenced by certain other call details parameters related with
setting up the Q.931 SETUP message for outgoing calls, or searching fo… | column | OctetString | .1.3.6.1.4.1.207.8.4.4.4.37.1.1.3 |
| ccDetailsInSetupCalledSubCheck mandatory Determines whether to perform a check when an incoming call matches this call details entry based on the
contents of the called subaddress information in the incoming SETUP messag… | column | Enumeration | .1.3.6.1.4.1.207.8.4.4.4.37.1.1.30 |
| ccDetailsInSetupUserCheck mandatory Determines whether to perform a check when an incoming call matches this call details entry based on the
contents of the user-user information in the incoming SETUP message. The v… | column | Enumeration | .1.3.6.1.4.1.207.8.4.4.4.37.1.1.31 |
| ccDetailsInSetupCliCheck mandatory Determines whether to perform a check and which check to perform when an incoming call matches this call details
entry based on the contents of the calling number information in t… | column | Enumeration | .1.3.6.1.4.1.207.8.4.4.4.37.1.1.32 |
| ccDetailsInSetupCliCheckList mandatory If the ccDetailsInSetupCliCheck object is set to 'present' or
'required', this object gives the index of the CLI list to check
against. The value of CLI list indices is 1..100. Th… | column | Integer32 | .1.3.6.1.4.1.207.8.4.4.4.37.1.1.33 |
| ccDetailsUserType mandatory The type of user of this call. The value 'attach' means that users have to attach to this call before the call
can be used for outgoing or incoming calls. The value 'ppp' means th… | column | Enumeration | .1.3.6.1.4.1.207.8.4.4.4.37.1.1.34 |
| ccDetailsLoginType mandatory The type of login for calls generated using this call details entry, for incoming calls only. Incoming calls
can be configured to go through a logging in phase before the call is … | column | Enumeration | .1.3.6.1.4.1.207.8.4.4.4.37.1.1.35 |
| ccDetailsUsername mandatory The source of the username when the ccDetailsLoginType object has a value of 'userdb', 'radius', 'tacacs' or
'all'. The value 'none' means no username is defined. The value 'cli' … | column | Enumeration | .1.3.6.1.4.1.207.8.4.4.4.37.1.1.36 |
| ccDetailsPassword mandatory The source of the password when the ccDetailsLoginType object has a value of 'userdb', 'radius', 'tacacs' or
'all'. The value 'none' means no password is defined. The value 'cli' … | column | Enumeration | .1.3.6.1.4.1.207.8.4.4.4.37.1.1.37 |
| ccDetailsBumpDelay mandatory The time, in tenths of a second, which the router will wait after clearing an existing call which has been bumped
to make way for a call based on this call details entry. | column | Integer32 | .1.3.6.1.4.1.207.8.4.4.4.37.1.1.38 |
| ccDetailsDataRate mandatory The data rate to use for active calls based on this call details entry. The actual data rate for outgoing calls
is determined by both this object and the data rate parameter for t… | column | Enumeration | .1.3.6.1.4.1.207.8.4.4.4.37.1.1.39 |
| ccDetailsCalledNumber mandatory The number called when this call details is activated. The number should include all telephone network access
codes, country codes and area codes required to make a call from the … | column | OctetString | .1.3.6.1.4.1.207.8.4.4.4.37.1.1.4 |
| ccDetailsPppTemplate mandatory The PPP template to use when creating dynamic PPP interfaces
for calls generated from this call details entry. The value 33
represents a default PPP template, the values 1 to 32 r… | column | Integer32 | .1.3.6.1.4.1.207.8.4.4.4.37.1.1.40 |
| ccDetailsUserModule mandatory The module ID of the user module currently attached to this ISDN call details entry. | column | Integer32 | .1.3.6.1.4.1.207.8.4.4.4.37.1.1.41 |
| ccDetailsNumberAttachments mandatory The number of attachments from the user module currently attached to this call details entry. The
ccAttachmentsTable gives the actual attachments for each call details entry. | column | Integer32 | .1.3.6.1.4.1.207.8.4.4.4.37.1.1.42 |
| ccDetailsCallingNumber mandatory The number used as the calling number when this call is activated. The calling number can optionally be placed
in the outgoing SETUP message. | column | OctetString | .1.3.6.1.4.1.207.8.4.4.4.37.1.1.5 |
| ccDetailsAlternateNumber mandatory The number called when all retries with the main called number have failed. In this event, the router tries
once with the alternate number, then checks the ccDetailsKeepup object … | column | OctetString | .1.3.6.1.4.1.207.8.4.4.4.37.1.1.6 |
| ccDetailsEnabled mandatory Whether this ISDN call is enabled or disabled for incoming and outgoing calls. If the call details entry is
disabled, all existing active calls based on this call details entry ar… | column | Enumeration | .1.3.6.1.4.1.207.8.4.4.4.37.1.1.7 |
| ccDetailsDirection mandatory The direction for which calls may be made or received using this call details entry. | column | Enumeration | .1.3.6.1.4.1.207.8.4.4.4.37.1.1.8 |
| ccDetailsPrecedence mandatory The precedence of this call details entry in the event of call collision. Call collision occurs when an
incoming call for a given details entry is detected while an outgoing call … | column | Enumeration | .1.3.6.1.4.1.207.8.4.4.4.37.1.1.9 |