timingSinkLabel
ALFOPLUS-SIAE-MIB ·
.1.3.6.1.4.1.3373.25.29.1.1.8
Object
column
OctetString
ASCII string used to describe the reference signal when a trap is sent.
Context
- MIB
- ALFOPLUS-SIAE-MIB
- OID
.1.3.6.1.4.1.3373.25.29.1.1.8- Type
- column
- Access
- readonly
- Status
- current
- Parent
- timingSinkRecord
- Table
- timingSinkTable
- Siblings
- 18
Syntax
OctetString
Values & Constraints
Object Constraints
range: 0-31
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| timingSinkId This object is used as Index of the Timing Sink Table and defines in union
with TimingSinkType the reference signal.
1..n: instances related to LIM A.
101..101+n: instances … | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3373.25.29.1.1.1 |
| timingSinkDriftAlarm Drift of reference signal (Probable cause = xxx) alarm
with associated severity. | column | Enumeration | .1.3.6.1.4.1.3373.25.29.1.1.10 |
| timingSinkActiveStatus Active status (Probable cause = xxx) status for the reference signal. | column | Enumeration | .1.3.6.1.4.1.3373.25.29.1.1.11 |
| timingSinkManualSwitch Manual switch enable. | column | Enumeration | .1.3.6.1.4.1.3373.25.29.1.1.12 |
| timingSinkForcedSwitch Forced switch enable.
This item is linked to a manual operation (ManOpRecord) instance. | column | Enumeration | .1.3.6.1.4.1.3373.25.29.1.1.13 |
| timingSinkWtrClear Clear wait time to restore making the reference signal immediately available. | column | Enumeration | .1.3.6.1.4.1.3373.25.29.1.1.14 |
| timingSinkCurrentQuality Current quality on sink instance. | column | Enumeration | .1.3.6.1.4.1.3373.25.29.1.1.15 |
| timingSinkOverwriteTxQuality Forcing of Tx quality parameter. | column | Enumeration | .1.3.6.1.4.1.3373.25.29.1.1.16 |
| timingSinkOverwriteRxQuality Forcing of Rx quality parameter. | column | Enumeration | .1.3.6.1.4.1.3373.25.29.1.1.17 |
| timingSinkSentQuality Quality level written in the S1 byte of the outgoing STM-n. | column | Enumeration | .1.3.6.1.4.1.3373.25.29.1.1.18 |
| timingSinkType This object is used as Index of the Timing Sink Table and defines if the
refernce signal is used to generate T0 or T4 system clock. | column | Enumeration | .1.3.6.1.4.1.3373.25.29.1.1.2 |
| timingSinkEthPortRole This item configures how to handle the role of a 1000BASE-T port
when it is used as a source of timing: choosing 'static', the
role is set according ethLanPhyTable settings, choos… | column | Enumeration | .1.3.6.1.4.1.3373.25.29.1.1.20 |
| timingSinkUnitId This object is used to define the timingGenerator which the sink
are referred to. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3373.25.29.1.1.3 |
| timingSinkStm1Id This object is used to define the Stm1 used as reference signal.
Meaningfull values:
(1..n): Stm1 id without protection.
100 + (1..n): Stm1 id with protection. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3373.25.29.1.1.4 |
| timingSinkPpiId This object is used to define the Ppi (2Mbit/s) used as reference signal. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3373.25.29.1.1.5 |
| timingSink2MhzId This object is used to define the 2MHz external clock used as reference signal. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3373.25.29.1.1.6 |
| timingSinkPriority This object is used to set the priority of the reference signal (p1 is
the highest priority). | column | Enumeration | .1.3.6.1.4.1.3373.25.29.1.1.7 |
| timingSinkLosAlarm Loss of reference signal (Probable cause = xxx) alarm
with associated severity. | column | Enumeration | .1.3.6.1.4.1.3373.25.29.1.1.9 |