timingGeneratorT4-T0
ALFOPLUS-SIAE-MIB ·
.1.3.6.1.4.1.3373.25.28.1.1.2
Object
column
r/w
Enumeration
This object is used to set or reset the condition T4 equal T0.
Context
- MIB
- ALFOPLUS-SIAE-MIB
- OID
.1.3.6.1.4.1.3373.25.28.1.1.2- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- timingGeneratorRecord
- Table
- timingGeneratorTable
- Siblings
- 18
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | t4-NE-t0 |
2 | t4-EQ-t0 |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| timingGeneratorUnitId This object is used as Index of the Timing Generator Table and defines
the unit with the timing generator function. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3373.25.28.1.1.1 |
| timingGeneratorFreeRunningStatus Free running status (Probable cause = xxx) with associated severity. | column | Enumeration | .1.3.6.1.4.1.3373.25.28.1.1.10 |
| timingGeneratorHoldoverStatus Holdover status (Probable cause = xxx) with associated severity. | column | Enumeration | .1.3.6.1.4.1.3373.25.28.1.1.11 |
| timingGeneratorStatusControl Clock generator operating mode control.
This item is linked to a manual operation (ManOpRecord) instance. | column | Enumeration | .1.3.6.1.4.1.3373.25.28.1.1.12 |
| timingGeneratorHoldoverFreq Holdover frequency value. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3373.25.28.1.1.13 |
| timingGeneratorActiveStatus Active status (Probable cause = xxx) with associated severity. | column | Enumeration | .1.3.6.1.4.1.3373.25.28.1.1.14 |
| timingGeneratorManualSwitch Manual switch enable (only if Timing generator EPS protection
is present). | column | Enumeration | .1.3.6.1.4.1.3373.25.28.1.1.15 |
| timingGeneratorForcedSwitch Forced switch enable (only if Timing generator EPS protection
is present).
This item is linked to a manual operation (ManOpRecord) instance. | column | Enumeration | .1.3.6.1.4.1.3373.25.28.1.1.16 |
| timingGeneratorT0CurrentQuality Current quality on T0. | column | Enumeration | .1.3.6.1.4.1.3373.25.28.1.1.17 |
| timingGeneratorT4CurrentQuality Current quality on T4. | column | Enumeration | .1.3.6.1.4.1.3373.25.28.1.1.18 |
| timingGeneratorT4MinimumQuality If the Quality Level of the signal used to derive T4 falls below
timingGeneratorT4MinimumQuality then the output will be squelched.
The value ql-DNU inhibits T4 squelch due to thi… | column | Enumeration | .1.3.6.1.4.1.3373.25.28.1.1.19 |
| timingGeneratorT4Squelch This object is used to enable/disable T4 squelch. | column | Enumeration | .1.3.6.1.4.1.3373.25.28.1.1.3 |
| timingGeneratorHoldOffTime HoldOff time in milliseconds (300..1800). | column | Integer32 | .1.3.6.1.4.1.3373.25.28.1.1.4 |
| timingGeneratorWtrTime Wait Time to Restore in minutes (0..12). | column | Integer32 | .1.3.6.1.4.1.3373.25.28.1.1.5 |
| timingGeneratorSinkLosSet Wait time (seconds) before to set Los of reference signal. | column | Integer32 | .1.3.6.1.4.1.3373.25.28.1.1.6 |
| timingGeneratorSinkLosReset Wait time (seconds) before to reset Los of reference signal. | column | Integer32 | .1.3.6.1.4.1.3373.25.28.1.1.7 |
| timingGeneratorT0SquelchAlarm T0 squelch Alarm (Probable cause = xxx) with associated severity. | column | Enumeration | .1.3.6.1.4.1.3373.25.28.1.1.8 |
| timingGeneratorT4SquelchAlarm T4 squelch Alarm (Probable cause = xxx) with associated severity. | column | Enumeration | .1.3.6.1.4.1.3373.25.28.1.1.9 |