vRtrIsisSpfSecondWait
ALCATEL-ISIS-MIB ·
.1.3.6.1.4.1.6486.800.1.2.1.10.14.1.10.2.1.1.21
Object
column
r/w
milliseconds Unsigned32
The value of vRtrIsisSpfInitialWait defines the hold time
between the first and second SPF calculation (in milliseconds).
Subsequent SPF runs will occur at exponentially increasing
intervals of spf-second-wait i.e. if spf-second-wait is 1000,
then the next SPF will run after 2000 msec, the next one at
4000 msec etc until it is capped off at spf-wait value.
The SPF interval will stay at spf-wait value until there are no
more SPF runs scheduled in that interval. After a full interval
without any SPF runs, the SPF interval will drop back to
spf-initial-wait.
Context
- MIB
- ALCATEL-ISIS-MIB
- OID
.1.3.6.1.4.1.6486.800.1.2.1.10.14.1.10.2.1.1.21- Type
- column
- Access
- readwrite
- Status
- current
- Units
- milliseconds
- Parent
- vRtrIsisEntry
- Table
- vRtrIsisTable
- Siblings
- 26
Syntax
milliseconds Unsigned32
Values & Constraints
Object Constraints
range: 1-100000
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| vRtrIsisLastEnabledTime The vRtrIsisLastEnabledTime variable contains the sysUpTime
value when vRtrIsisAdminState was last set to enabled (1) to
run the IS-IS protocol in the router. | column | OctetString | .1.3.6.1.4.1.6486.800.1.2.1.10.14.1.10.2.1.1.1 |
| vRtrIsisLspLifetime The value of vRtrIsisLspLifetime specifies how long, in seconds,
a given LSP is considered valid without the originating router
having refreshed the LSP. The actual LSP refresh t… | column | seconds Unsigned32 | .1.3.6.1.4.1.6486.800.1.2.1.10.14.1.10.2.1.1.10 |
| vRtrIsisOverloadTimeout The value of vRtrIsisOverloadTimeout is the amount of time, in
seconds, the router operates in the overload state before
attempting to reestablish normal operations. While in ove… | column | seconds Unsigned32 | .1.3.6.1.4.1.6486.800.1.2.1.10.14.1.10.2.1.1.11 |
| vRtrIsisOperState vRtrIsisOperState indicates the current operating state
of this IS-IS protocol instance on this router. | column | TmnxOperState | .1.3.6.1.4.1.6486.800.1.2.1.10.14.1.10.2.1.1.12 |
| vRtrIsisShortCuts When the value of vRtrIsisShortCuts is 'true', MPLS label switched
paths of LSPs are used as next hops whenever BGP need to resolve
the next hop within the IS-IS domain. When the… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6486.800.1.2.1.10.14.1.10.2.1.1.13 |
| vRtrIsisSpfHoldTime Time interval at which SPF is run. | column | seconds Integer32 | .1.3.6.1.4.1.6486.800.1.2.1.10.14.1.10.2.1.1.14 |
| vRtrIsisLastSpfRun The vRtrIsisLastSpfRun contains the sysUpTime value when the last
SPF run was performed for this instance of the IS-IS protocol in
the router. | column | OctetString | .1.3.6.1.4.1.6486.800.1.2.1.10.14.1.10.2.1.1.15 |
| vRtrIsisGracefulRestart The value of vRtrIsisGracefulRestart specifies whether the
graceful restart is enabled or disabled for this instance of IS-IS
on the router. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6486.800.1.2.1.10.14.1.10.2.1.1.16 |
| vRtrIsisOverloadOnBoot The value of vRtrIsisOverloadOnBoot specifies if the router should
be in overload state right after the boot up process.
If the vRtrIsisOverloadOnBoot is set to 'enabled' the over… | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.10.14.1.10.2.1.1.17 |
| vRtrIsisOverloadOnBootTimeout The value of vRtrIsisOverloadOnBootTimeout is the amount of time,
in seconds for which the router operates in the overload state
before attempting to reestablish normal operation… | column | seconds Unsigned32 | .1.3.6.1.4.1.6486.800.1.2.1.10.14.1.10.2.1.1.18 |
| vRtrIsisSpfWait The value of vRtrIsisSpfWait defines the Maximum interval
between two consecutive spf calculations in seconds. | column | seconds Unsigned32 | .1.3.6.1.4.1.6486.800.1.2.1.10.14.1.10.2.1.1.19 |
| vRtrIsisAuthKey vRtrIsisAuthKey is the authentication key string used to verify
the authenticity of packets sent by neighboring routers on an
IS-IS interface. For authentication to succeed both … | column | OctetString | .1.3.6.1.4.1.6486.800.1.2.1.10.14.1.10.2.1.1.2 |
| vRtrIsisSpfInitialWait The value of vRtrIsisSpfInitialWait defines the initial SPF
calculation delay (in milliseconds) after a topology change. | column | milliseconds Unsigned32 | .1.3.6.1.4.1.6486.800.1.2.1.10.14.1.10.2.1.1.20 |
| vRtrIsisLspMaxWait The value of vRtrIsisLspWait dDefines the maximum interval
(in seconds) between two consecutive ocurrences of an LSP
being generated. | column | seconds Unsigned32 | .1.3.6.1.4.1.6486.800.1.2.1.10.14.1.10.2.1.1.22 |
| vRtrIsisLspInitialWait The value of vRtrIsisLspInitialWait defines the initial LSP
generation delay (in seconds). | column | seconds Unsigned32 | .1.3.6.1.4.1.6486.800.1.2.1.10.14.1.10.2.1.1.23 |
| vRtrIsisLspSecondWait The value of vRtrIsisLspInitialWait defines the hold time
between the first and second LSP generation (in seconds). | column | seconds Unsigned32 | .1.3.6.1.4.1.6486.800.1.2.1.10.14.1.10.2.1.1.24 |
| vRtrIsisCsnpAuthentication When vRtrIsisCsnpAuthentication has a value of 'true', enables
authentication of individual ISIS packets of CSNP type.
The value of 'false'
When vRtrIsisCsnpAuth… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6486.800.1.2.1.10.14.1.10.2.1.1.25 |
| vRtrIsisHelloAuthentication When vRtrIsisHelloAuthentication has a value of 'true', enables
authentication of individual ISIS packets of HELLO type.
The value of 'false'
When vRtrIsisHelloA… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6486.800.1.2.1.10.14.1.10.2.1.1.26 |
| vRtrIsisPsnpAuthentication When vRtrIsisPsnpAuthentication has a value of 'true', enables
authentication of individual ISIS packets of PSNP type.
The value of 'false'
When vRtrIsisPsnpAuth… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6486.800.1.2.1.10.14.1.10.2.1.1.27 |
| vRtrIsisGRRestartDuration The value of vRtrIsisGRRestartDuration specifies the maximum
amount of time, in seconds, needed to re-establish ISIS
adjacencies in all areas. | column | seconds Unsigned32 | .1.3.6.1.4.1.6486.800.1.2.1.10.14.1.10.2.1.1.28 |
| vRtrIsisGRHelperMode The value of vRtrIsisGRHelperMode specifies whether the
graceful restart helper mode is enabled or disabled for this
instance of IS-IS on the router.
vRtrIsisGRHelperMode is val… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6486.800.1.2.1.10.14.1.10.2.1.1.29 |
| vRtrIsisAuthType The value of vRtrIsisAuthType indicates the method of
authentication used to verify the authenticity of packets sent
by neighboring routers on an IS-IS interface. For authenticat… | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.10.14.1.10.2.1.1.3 |
| vRtrIsisStrictAdjacencyCheck The value of vRtrIsisStrictAdjacencyCheck specifies whether an
ISIS adjacency can be formed when two routers do not run the
same IP versions.
When the value is 'tr… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6486.800.1.2.1.10.14.1.10.2.1.1.30 |
| vRtrIsisActivateIPv4 The value of vRtrIsisActivateIPv4 activates the IPv4 routing in
ISIS. This will be enabled by default. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6486.800.1.2.1.10.14.1.10.2.1.1.31 |
| vRtrIsisActivateIPv6 The value of vRtrIsisActivateIPv6 activates the IPv6 routing in
ISIS. This will be enabled by default. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6486.800.1.2.1.10.14.1.10.2.1.1.32 |
| vRtrIsisAuthCheck When vRtrIsisAuthCheck has a value of 'true', all IS-IS protocol
packets that have a mismatch on either the authentication type,
specified by the value of vRtrIsisAuthType, or the… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6486.800.1.2.1.10.14.1.10.2.1.1.4 |