vRtrIsisAuthKey
ALCATEL-ISIS-MIB ·
.1.3.6.1.4.1.6486.800.1.2.1.10.14.1.10.2.1.1.2
Object
column
r/w
OctetString
vRtrIsisAuthKey is the authentication key string used to verify
the authenticity of packets sent by neighboring routers on an
IS-IS interface. For authentication to succeed both the
authentication key and the authentication type defined by the
vRtrIsisAuthType variable must match. If vRtrIsisAuthType
is set to 'password', vRtrIsisAuthKey can include any ASCII
character.
Authentication can be configured globally and applied to all
ISIS levels or it can be configured on a per level basis.
The most specific value is used.
When read, vRtrIsisAuthKey always returns an Octet String of
length zero.
Context
- MIB
- ALCATEL-ISIS-MIB
- OID
.1.3.6.1.4.1.6486.800.1.2.1.10.14.1.10.2.1.1.2- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- vRtrIsisEntry
- Table
- vRtrIsisTable
- Siblings
- 26
Syntax
OctetString
Values & Constraints
Object Constraints
range: 0-118
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| vRtrIsisLastEnabledTime The vRtrIsisLastEnabledTime variable contains the sysUpTime
value when vRtrIsisAdminState was last set to enabled (1) to
run the IS-IS protocol in the router. | column | OctetString | .1.3.6.1.4.1.6486.800.1.2.1.10.14.1.10.2.1.1.1 |
| vRtrIsisLspLifetime The value of vRtrIsisLspLifetime specifies how long, in seconds,
a given LSP is considered valid without the originating router
having refreshed the LSP. The actual LSP refresh t… | column | seconds Unsigned32 | .1.3.6.1.4.1.6486.800.1.2.1.10.14.1.10.2.1.1.10 |
| vRtrIsisOverloadTimeout The value of vRtrIsisOverloadTimeout is the amount of time, in
seconds, the router operates in the overload state before
attempting to reestablish normal operations. While in ove… | column | seconds Unsigned32 | .1.3.6.1.4.1.6486.800.1.2.1.10.14.1.10.2.1.1.11 |
| vRtrIsisOperState vRtrIsisOperState indicates the current operating state
of this IS-IS protocol instance on this router. | column | TmnxOperState | .1.3.6.1.4.1.6486.800.1.2.1.10.14.1.10.2.1.1.12 |
| vRtrIsisShortCuts When the value of vRtrIsisShortCuts is 'true', MPLS label switched
paths of LSPs are used as next hops whenever BGP need to resolve
the next hop within the IS-IS domain. When the… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6486.800.1.2.1.10.14.1.10.2.1.1.13 |
| vRtrIsisSpfHoldTime Time interval at which SPF is run. | column | seconds Integer32 | .1.3.6.1.4.1.6486.800.1.2.1.10.14.1.10.2.1.1.14 |
| vRtrIsisLastSpfRun The vRtrIsisLastSpfRun contains the sysUpTime value when the last
SPF run was performed for this instance of the IS-IS protocol in
the router. | column | OctetString | .1.3.6.1.4.1.6486.800.1.2.1.10.14.1.10.2.1.1.15 |
| vRtrIsisGracefulRestart The value of vRtrIsisGracefulRestart specifies whether the
graceful restart is enabled or disabled for this instance of IS-IS
on the router. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6486.800.1.2.1.10.14.1.10.2.1.1.16 |
| vRtrIsisOverloadOnBoot The value of vRtrIsisOverloadOnBoot specifies if the router should
be in overload state right after the boot up process.
If the vRtrIsisOverloadOnBoot is set to 'enabled' the over… | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.10.14.1.10.2.1.1.17 |
| vRtrIsisOverloadOnBootTimeout The value of vRtrIsisOverloadOnBootTimeout is the amount of time,
in seconds for which the router operates in the overload state
before attempting to reestablish normal operation… | column | seconds Unsigned32 | .1.3.6.1.4.1.6486.800.1.2.1.10.14.1.10.2.1.1.18 |
| vRtrIsisSpfWait The value of vRtrIsisSpfWait defines the Maximum interval
between two consecutive spf calculations in seconds. | column | seconds Unsigned32 | .1.3.6.1.4.1.6486.800.1.2.1.10.14.1.10.2.1.1.19 |
| vRtrIsisSpfInitialWait The value of vRtrIsisSpfInitialWait defines the initial SPF
calculation delay (in milliseconds) after a topology change. | column | milliseconds Unsigned32 | .1.3.6.1.4.1.6486.800.1.2.1.10.14.1.10.2.1.1.20 |
| vRtrIsisSpfSecondWait The value of vRtrIsisSpfInitialWait defines the hold time
between the first and second SPF calculation (in milliseconds).
Subsequent SPF runs will occur at exponen… | column | milliseconds Unsigned32 | .1.3.6.1.4.1.6486.800.1.2.1.10.14.1.10.2.1.1.21 |
| vRtrIsisLspMaxWait The value of vRtrIsisLspWait dDefines the maximum interval
(in seconds) between two consecutive ocurrences of an LSP
being generated. | column | seconds Unsigned32 | .1.3.6.1.4.1.6486.800.1.2.1.10.14.1.10.2.1.1.22 |
| vRtrIsisLspInitialWait The value of vRtrIsisLspInitialWait defines the initial LSP
generation delay (in seconds). | column | seconds Unsigned32 | .1.3.6.1.4.1.6486.800.1.2.1.10.14.1.10.2.1.1.23 |
| vRtrIsisLspSecondWait The value of vRtrIsisLspInitialWait defines the hold time
between the first and second LSP generation (in seconds). | column | seconds Unsigned32 | .1.3.6.1.4.1.6486.800.1.2.1.10.14.1.10.2.1.1.24 |
| vRtrIsisCsnpAuthentication When vRtrIsisCsnpAuthentication has a value of 'true', enables
authentication of individual ISIS packets of CSNP type.
The value of 'false'
When vRtrIsisCsnpAuth… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6486.800.1.2.1.10.14.1.10.2.1.1.25 |
| vRtrIsisHelloAuthentication When vRtrIsisHelloAuthentication has a value of 'true', enables
authentication of individual ISIS packets of HELLO type.
The value of 'false'
When vRtrIsisHelloA… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6486.800.1.2.1.10.14.1.10.2.1.1.26 |
| vRtrIsisPsnpAuthentication When vRtrIsisPsnpAuthentication has a value of 'true', enables
authentication of individual ISIS packets of PSNP type.
The value of 'false'
When vRtrIsisPsnpAuth… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6486.800.1.2.1.10.14.1.10.2.1.1.27 |
| vRtrIsisGRRestartDuration The value of vRtrIsisGRRestartDuration specifies the maximum
amount of time, in seconds, needed to re-establish ISIS
adjacencies in all areas. | column | seconds Unsigned32 | .1.3.6.1.4.1.6486.800.1.2.1.10.14.1.10.2.1.1.28 |
| vRtrIsisGRHelperMode The value of vRtrIsisGRHelperMode specifies whether the
graceful restart helper mode is enabled or disabled for this
instance of IS-IS on the router.
vRtrIsisGRHelperMode is val… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6486.800.1.2.1.10.14.1.10.2.1.1.29 |
| vRtrIsisAuthType The value of vRtrIsisAuthType indicates the method of
authentication used to verify the authenticity of packets sent
by neighboring routers on an IS-IS interface. For authenticat… | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.10.14.1.10.2.1.1.3 |
| vRtrIsisStrictAdjacencyCheck The value of vRtrIsisStrictAdjacencyCheck specifies whether an
ISIS adjacency can be formed when two routers do not run the
same IP versions.
When the value is 'tr… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6486.800.1.2.1.10.14.1.10.2.1.1.30 |
| vRtrIsisActivateIPv4 The value of vRtrIsisActivateIPv4 activates the IPv4 routing in
ISIS. This will be enabled by default. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6486.800.1.2.1.10.14.1.10.2.1.1.31 |
| vRtrIsisActivateIPv6 The value of vRtrIsisActivateIPv6 activates the IPv6 routing in
ISIS. This will be enabled by default. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6486.800.1.2.1.10.14.1.10.2.1.1.32 |
| vRtrIsisAuthCheck When vRtrIsisAuthCheck has a value of 'true', all IS-IS protocol
packets that have a mismatch on either the authentication type,
specified by the value of vRtrIsisAuthType, or the… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6486.800.1.2.1.10.14.1.10.2.1.1.4 |