alaPimsmStaticRPTable

ALCATEL-IND1-PIM-MIB · .1.3.6.1.4.1.6486.800.1.2.1.10.6.1.1.1.15

Object

table obsolete

The (conceptual) table listing the IP multicast groups 
to be used in the group-to-RP mapping when
the value of alaPimsmAdminStaticRPConfig is enabled.

Context

MIB: ALCATEL-IND1-PIM-MIB
OID: .1.3.6.1.4.1.6486.800.1.2.1.10.6.1.1.1.15
Type: table
Status: obsolete
Parent: alaPimsmGlobalConfig
Siblings: 23
Children: 1

Syntax

No syntax metadata recorded.

Values & Constraints

No enumerated values or constraints recorded.

Related Objects

Sibling Objects

Object	Type	Syntax	OID
alaPimsmAdminStatus Administratively enables/disables the PIM-SM protocol on this router.	scalar	Enumeration	`.1.3.6.1.4.1.6486.800.1.2.1.10.6.1.1.1.1`
alaPimsmMaxRPs The maximum number of C-RPs allowed in the PIM-SM domain.	scalar	Integer32	`.1.3.6.1.4.1.6486.800.1.2.1.10.6.1.1.1.10`
alaPimsmProbeTime When NULL Registers are used, this is the time between sending a NULL Register and the Register- Suppression-Timer expiring unless it is restarted by receiving a Register-Stop.	scalar	seconds Integer32	`.1.3.6.1.4.1.6486.800.1.2.1.10.6.1.1.1.11`
alaPimsmOldRegisterMessageSupport Specifies the application of the checksum function on received Register messages in the PIM-SM domain. When set to full(2), the checksum for a register message is computed for th…	scalar	Enumeration	`.1.3.6.1.4.1.6486.800.1.2.1.10.6.1.1.1.12`
alaPimsmRegisterSuppressionTimeout obsolete This is the amount of time a Designated Router (DR) will stop sending Registers on behalf of sources to the RP once a Register-Stop has been received.	scalar	seconds Integer32	`.1.3.6.1.4.1.6486.800.1.2.1.10.6.1.1.1.13`
alaPimsmAdminStaticRPConfig obsolete Administratively enables/disables Static RP Configuration on this router.	scalar	Enumeration	`.1.3.6.1.4.1.6486.800.1.2.1.10.6.1.1.1.14`
alaPimsmAdminSPTConfig Administratively enables/disables SPT Switchover upon receiving the first data packet.	scalar	Enumeration	`.1.3.6.1.4.1.6486.800.1.2.1.10.6.1.1.1.16`
alaPimsmRPThreshold Sets the RP threshold value (in bps) to be used in determining when to switch to native forwarding at the RP. The value of 0 disables the RP Threshold functionality.	scalar	Integer32	`.1.3.6.1.4.1.6486.800.1.2.1.10.6.1.1.1.17`
alaPimsmV6AdminStatus Administratively enables/disables the PIM-SM IPv6 protocol on this router.	scalar	Enumeration	`.1.3.6.1.4.1.6486.800.1.2.1.10.6.1.1.1.18`
alaPimsmV6SPTConfig Administratively enables/disables PIM IPv6 SPT Switchover upon receiving the first data packet.	scalar	Enumeration	`.1.3.6.1.4.1.6486.800.1.2.1.10.6.1.1.1.19`
alaPimsmAdminBSRAddress obsolete The IP address used to source the bootstrap message when the router is configured to be a candidate bootstrap router (C-BSR). This IP address should belong to a PIM-enabled VLAN.	scalar	SNMPv2-SMIIpAddress	`.1.3.6.1.4.1.6486.800.1.2.1.10.6.1.1.1.2`
alaPimsmV6RPSwitchover Administratively enables/disables whether PIM IPv6 will attempt to switch to native forwarding at the RP upon receiving the first register-encapsulated packet.	scalar	Enumeration	`.1.3.6.1.4.1.6486.800.1.2.1.10.6.1.1.1.20`
alaPimsmBfdStatus Register / De-Register PIM SM with BFD protocol.	scalar	Enumeration	`.1.3.6.1.4.1.6486.800.1.2.1.10.6.1.1.1.21`
alaPimsmBidirStatus Administratively enables/disables the PIM BIDIR protocol on this router.	scalar	Enumeration	`.1.3.6.1.4.1.6486.800.1.2.1.10.6.1.1.1.22`
alaPimsmBidirPeriodicInterval This is the interval at which the DF for each RPA will periodically announce its status in a Winner message. A value of 0 indicates that periodic messages will not be sent.	scalar	seconds Integer32	`.1.3.6.1.4.1.6486.800.1.2.1.10.6.1.1.1.23`
alaPimsmV6BidirStatus Administratively enables/disables the PIM V6 BIDIR protocol on this router.	scalar	Enumeration	`.1.3.6.1.4.1.6486.800.1.2.1.10.6.1.1.1.24`
alaPimsmAdminBSRHashmasklen obsolete The length (in bits) of the mask to use in the hash function when computing the rendezvous point (RP) for a multicast group. This value may be changed to facilitate vendor inter…	scalar	Integer32	`.1.3.6.1.4.1.6486.800.1.2.1.10.6.1.1.1.3`
alaPimsmAdminBSRPriority obsolete The candidate bootstrap router's (C-BSR) priority. The C-BSR with the biggest priority value will be elected as the BSR for this domain.	scalar	Integer32	`.1.3.6.1.4.1.6486.800.1.2.1.10.6.1.1.1.4`
alaPimsmCRPExpiryTime obsolete The maximum time a PIM-SM router considers the current candidate rendezvous point (C-RP) active.	scalar	seconds Integer32	`.1.3.6.1.4.1.6486.800.1.2.1.10.6.1.1.1.5`
alaPimsmCRPInterval obsolete This is the interval at which the candidate rendezvous point router's advertisements (C-RP-Adv) are sent to the bootstrap router.	scalar	Integer32	`.1.3.6.1.4.1.6486.800.1.2.1.10.6.1.1.1.6`
alaPimsmAdminCRPAddress obsolete The IP Address of the C-RP when this router is configured to be a Candidate RP. This IP address should belong to a PIM-enabled vlan. The value of 0 indicates that this router is…	scalar	SNMPv2-SMIIpAddress	`.1.3.6.1.4.1.6486.800.1.2.1.10.6.1.1.1.7`
alaPimsmAdminCRPPriority obsolete The candidate rendezvous point (C-RP) router's priority. A lower numeric value denotes a higher priority.	scalar	Integer32	`.1.3.6.1.4.1.6486.800.1.2.1.10.6.1.1.1.8`
alaPimsmDataTimeout obsolete This is the time after which (S,G) state for a silent source will be deleted.	scalar	seconds Integer32	`.1.3.6.1.4.1.6486.800.1.2.1.10.6.1.1.1.9`

Child Objects