alaPimsmOldRegisterMessageSupport

ALCATEL-IND1-PIM-MIB · .1.3.6.1.4.1.6486.800.1.2.1.10.6.1.1.1.12
MIB view Table view

Object

scalar r/w Enumeration 
Specifies the application of the checksum function on
received Register messages in the PIM-SM domain.  When
set to full(2), the checksum for a register message
is computed for the entire packet (i.e. includes data).
When set to header(1), the checksum is done only on the
first 8 bytes of the packet.  This variable is provided
for interoperability reasons and may be required for
Compatibility with older implementations of PIM-SM v2.
This parameter must be set the same throughout the
PIM-SM domain.

Context

MIB
ALCATEL-IND1-PIM-MIB
OID
.1.3.6.1.4.1.6486.800.1.2.1.10.6.1.1.1.12
Type
scalar
Access
readwrite
Status
current
Parent
alaPimsmGlobalConfig
Siblings
23

Syntax

Enumeration

Values & Constraints

Enumerated Values
1header
2full

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
alaPimsmAdminStatus
Administratively enables/disables the PIM-SM protocol on this router.
scalarEnumeration.1.3.6.1.4.1.6486.800.1.2.1.10.6.1.1.1.1
alaPimsmMaxRPs
The maximum number of C-RPs allowed in the PIM-SM domain.
scalarInteger32.1.3.6.1.4.1.6486.800.1.2.1.10.6.1.1.1.10
alaPimsmProbeTime
When NULL Registers are used, this is the time between sending a NULL Register and the Register- Suppression-Timer expiring unless it is restarted by receiving a Register-Stop.
scalarseconds Integer32.1.3.6.1.4.1.6486.800.1.2.1.10.6.1.1.1.11
alaPimsmRegisterSuppressionTimeout obsolete
This is the amount of time a Designated Router (DR) will stop sending Registers on behalf of sources to the RP once a Register-Stop has been received.
scalarseconds Integer32.1.3.6.1.4.1.6486.800.1.2.1.10.6.1.1.1.13
alaPimsmAdminStaticRPConfig obsolete
Administratively enables/disables Static RP Configuration on this router.
scalarEnumeration.1.3.6.1.4.1.6486.800.1.2.1.10.6.1.1.1.14
alaPimsmStaticRPTable obsolete
The (conceptual) table listing the IP multicast groups to be used in the group-to-RP mapping when the value of alaPimsmAdminStaticRPConfig is enabled.
table-.1.3.6.1.4.1.6486.800.1.2.1.10.6.1.1.1.15
alaPimsmAdminSPTConfig
Administratively enables/disables SPT Switchover upon receiving the first data packet.
scalarEnumeration.1.3.6.1.4.1.6486.800.1.2.1.10.6.1.1.1.16
alaPimsmRPThreshold
Sets the RP threshold value (in bps) to be used in determining when to switch to native forwarding at the RP. The value of 0 disables the RP Threshold functionality.
scalarInteger32.1.3.6.1.4.1.6486.800.1.2.1.10.6.1.1.1.17
alaPimsmV6AdminStatus
Administratively enables/disables the PIM-SM IPv6 protocol on this router.
scalarEnumeration.1.3.6.1.4.1.6486.800.1.2.1.10.6.1.1.1.18
alaPimsmV6SPTConfig
Administratively enables/disables PIM IPv6 SPT Switchover upon receiving the first data packet.
scalarEnumeration.1.3.6.1.4.1.6486.800.1.2.1.10.6.1.1.1.19
alaPimsmAdminBSRAddress obsolete
The IP address used to source the bootstrap message when the router is configured to be a candidate bootstrap router (C-BSR). This IP address should belong to a PIM-enabled VLAN.
scalarSNMPv2-SMIIpAddress.1.3.6.1.4.1.6486.800.1.2.1.10.6.1.1.1.2
alaPimsmV6RPSwitchover
Administratively enables/disables whether PIM IPv6 will attempt to switch to native forwarding at the RP upon receiving the first register-encapsulated packet.
scalarEnumeration.1.3.6.1.4.1.6486.800.1.2.1.10.6.1.1.1.20
alaPimsmBfdStatus
Register / De-Register PIM SM with BFD protocol.
scalarEnumeration.1.3.6.1.4.1.6486.800.1.2.1.10.6.1.1.1.21
alaPimsmBidirStatus
Administratively enables/disables the PIM BIDIR protocol on this router.
scalarEnumeration.1.3.6.1.4.1.6486.800.1.2.1.10.6.1.1.1.22
alaPimsmBidirPeriodicInterval
This is the interval at which the DF for each RPA will periodically announce its status in a Winner message. A value of 0 indicates that periodic messages will not be sent.
scalarseconds Integer32.1.3.6.1.4.1.6486.800.1.2.1.10.6.1.1.1.23
alaPimsmV6BidirStatus
Administratively enables/disables the PIM V6 BIDIR protocol on this router.
scalarEnumeration.1.3.6.1.4.1.6486.800.1.2.1.10.6.1.1.1.24
alaPimsmAdminBSRHashmasklen obsolete
The length (in bits) of the mask to use in the hash function when computing the rendezvous point (RP) for a multicast group. This value may be changed to facilitate vendor inter…
scalarInteger32.1.3.6.1.4.1.6486.800.1.2.1.10.6.1.1.1.3
alaPimsmAdminBSRPriority obsolete
The candidate bootstrap router's (C-BSR) priority. The C-BSR with the biggest priority value will be elected as the BSR for this domain.
scalarInteger32.1.3.6.1.4.1.6486.800.1.2.1.10.6.1.1.1.4
alaPimsmCRPExpiryTime obsolete
The maximum time a PIM-SM router considers the current candidate rendezvous point (C-RP) active.
scalarseconds Integer32.1.3.6.1.4.1.6486.800.1.2.1.10.6.1.1.1.5
alaPimsmCRPInterval obsolete
This is the interval at which the candidate rendezvous point router's advertisements (C-RP-Adv) are sent to the bootstrap router.
scalarInteger32.1.3.6.1.4.1.6486.800.1.2.1.10.6.1.1.1.6
alaPimsmAdminCRPAddress obsolete
The IP Address of the C-RP when this router is configured to be a Candidate RP. This IP address should belong to a PIM-enabled vlan. The value of 0 indicates that this router is…
scalarSNMPv2-SMIIpAddress.1.3.6.1.4.1.6486.800.1.2.1.10.6.1.1.1.7
alaPimsmAdminCRPPriority obsolete
The candidate rendezvous point (C-RP) router's priority. A lower numeric value denotes a higher priority.
scalarInteger32.1.3.6.1.4.1.6486.800.1.2.1.10.6.1.1.1.8
alaPimsmDataTimeout obsolete
This is the time after which (S,G) state for a silent source will be deleted.
scalarseconds Integer32.1.3.6.1.4.1.6486.800.1.2.1.10.6.1.1.1.9