alaPimsmMaxRPs
ALCATEL-IND1-PIM-MIB ·
.1.3.6.1.4.1.6486.800.1.2.1.10.6.1.1.1.10
Object
scalar
r/w
Integer32
The maximum number of C-RPs allowed in the PIM-SM domain.
Context
- MIB
- ALCATEL-IND1-PIM-MIB
- OID
.1.3.6.1.4.1.6486.800.1.2.1.10.6.1.1.1.10- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- alaPimsmGlobalConfig
- Siblings
- 23
Syntax
Integer32
Values & Constraints
Object Constraints
range: 1-100
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| alaPimsmAdminStatus Administratively enables/disables the
PIM-SM protocol on this router. | scalar | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.10.6.1.1.1.1 |
| alaPimsmProbeTime When NULL Registers are used, this is the time
between sending a NULL Register and the Register-
Suppression-Timer expiring unless it is restarted
by receiving a Register-Stop. | scalar | seconds Integer32 | .1.3.6.1.4.1.6486.800.1.2.1.10.6.1.1.1.11 |
| alaPimsmOldRegisterMessageSupport Specifies the application of the checksum function on
received Register messages in the PIM-SM domain. When
set to full(2), the checksum for a register message
is computed for th… | scalar | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.10.6.1.1.1.12 |
| alaPimsmRegisterSuppressionTimeout obsolete This is the amount of time a Designated Router (DR) will
stop sending Registers on behalf of sources to the RP
once a Register-Stop has been received. | scalar | seconds Integer32 | .1.3.6.1.4.1.6486.800.1.2.1.10.6.1.1.1.13 |
| alaPimsmAdminStaticRPConfig obsolete Administratively enables/disables Static RP
Configuration on this router. | scalar | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.10.6.1.1.1.14 |
| alaPimsmStaticRPTable obsolete The (conceptual) table listing the IP multicast groups
to be used in the group-to-RP mapping when
the value of alaPimsmAdminStaticRPConfig is enabled. | table | - | .1.3.6.1.4.1.6486.800.1.2.1.10.6.1.1.1.15 |
| alaPimsmAdminSPTConfig Administratively enables/disables SPT Switchover
upon receiving the first data packet. | scalar | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.10.6.1.1.1.16 |
| alaPimsmRPThreshold Sets the RP threshold value (in bps) to be used
in determining when to switch to native
forwarding at the RP. The value of 0
disables the RP Threshold functionality. | scalar | Integer32 | .1.3.6.1.4.1.6486.800.1.2.1.10.6.1.1.1.17 |
| alaPimsmV6AdminStatus Administratively enables/disables the
PIM-SM IPv6 protocol on this router. | scalar | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.10.6.1.1.1.18 |
| alaPimsmV6SPTConfig Administratively enables/disables PIM IPv6 SPT Switchover
upon receiving the first data packet. | scalar | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.10.6.1.1.1.19 |
| alaPimsmAdminBSRAddress obsolete The IP address used to source the bootstrap message when
the router is configured to be a candidate bootstrap
router (C-BSR). This IP address should belong to a
PIM-enabled VLAN. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.6486.800.1.2.1.10.6.1.1.1.2 |
| alaPimsmV6RPSwitchover Administratively enables/disables whether PIM IPv6
will attempt to switch to native forwarding at the RP
upon receiving the first register-encapsulated packet. | scalar | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.10.6.1.1.1.20 |
| alaPimsmBfdStatus Register / De-Register PIM SM with BFD protocol. | scalar | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.10.6.1.1.1.21 |
| alaPimsmBidirStatus Administratively enables/disables the
PIM BIDIR protocol on this router. | scalar | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.10.6.1.1.1.22 |
| alaPimsmBidirPeriodicInterval This is the interval at which the DF for each RPA
will periodically announce its status in a
Winner message.
A value of 0 indicates that periodic messages will
not be sent. | scalar | seconds Integer32 | .1.3.6.1.4.1.6486.800.1.2.1.10.6.1.1.1.23 |
| alaPimsmV6BidirStatus Administratively enables/disables the
PIM V6 BIDIR protocol on this router. | scalar | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.10.6.1.1.1.24 |
| alaPimsmAdminBSRHashmasklen obsolete The length (in bits) of the mask to use in the hash
function when computing the rendezvous point (RP) for a
multicast group. This value may be changed to facilitate
vendor inter… | scalar | Integer32 | .1.3.6.1.4.1.6486.800.1.2.1.10.6.1.1.1.3 |
| alaPimsmAdminBSRPriority obsolete The candidate bootstrap router's (C-BSR) priority. The
C-BSR with the biggest priority value will be elected
as the BSR for this domain. | scalar | Integer32 | .1.3.6.1.4.1.6486.800.1.2.1.10.6.1.1.1.4 |
| alaPimsmCRPExpiryTime obsolete The maximum time a PIM-SM router considers the current
candidate rendezvous point (C-RP) active. | scalar | seconds Integer32 | .1.3.6.1.4.1.6486.800.1.2.1.10.6.1.1.1.5 |
| alaPimsmCRPInterval obsolete This is the interval at which the candidate rendezvous
point router's advertisements (C-RP-Adv) are sent
to the bootstrap router. | scalar | Integer32 | .1.3.6.1.4.1.6486.800.1.2.1.10.6.1.1.1.6 |
| alaPimsmAdminCRPAddress obsolete The IP Address of the C-RP when this router is configured
to be a Candidate RP. This IP address should belong to
a PIM-enabled vlan. The value of 0 indicates that
this router is… | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.6486.800.1.2.1.10.6.1.1.1.7 |
| alaPimsmAdminCRPPriority obsolete The candidate rendezvous point (C-RP) router's
priority. A lower numeric value denotes a higher
priority. | scalar | Integer32 | .1.3.6.1.4.1.6486.800.1.2.1.10.6.1.1.1.8 |
| alaPimsmDataTimeout obsolete This is the time after which (S,G) state for a
silent source will be deleted. | scalar | seconds Integer32 | .1.3.6.1.4.1.6486.800.1.2.1.10.6.1.1.1.9 |