alaOspfIfMd5Table
ALCATEL-IND1-OSPF-MIB ·
.1.3.6.1.4.1.6486.800.1.2.1.10.4.1.1.1.16
Object
table
The OSPF Interface MD5 Table describes the MD5 key management for OSPF interfaces.
Context
- MIB
- ALCATEL-IND1-OSPF-MIB
- OID
.1.3.6.1.4.1.6486.800.1.2.1.10.4.1.1.1.16- Type
- table
- Status
- current
- Parent
- alaProtocolOspf
- Siblings
- 38
- Children
- 1
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| alaOspfRedistAdminStatus deprecated Enable or disable redistribution of routes into OSPF. This object has been
deprecated. Use the alaRouteMapRedistProtoEntry objects of AlcatelIND1RouteMap.mib. | scalar | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.10.4.1.1.1.1 |
| alaOspfRedistProtoTable deprecated Protocol based configuration for route redistribution using OSPF. This table has been
deprecated. Use the alaRouteMapRedistProtoTable of AlcatelIND1RouteMap.mib. | table | - | .1.3.6.1.4.1.6486.800.1.2.1.10.4.1.1.1.10 |
| alaOspfRouteTable OSPF routing table which contains the network routes. | table | - | .1.3.6.1.4.1.6486.800.1.2.1.10.4.1.1.1.12 |
| alaOspfBdrRouterTable OSPF routing table which contains the routes to border
(ABR and ASBR) routers. | table | - | .1.3.6.1.4.1.6486.800.1.2.1.10.4.1.1.1.13 |
| alaOspfRedistRouteTable deprecated A configuration table which controls the routes to be
redistributed by OSPF from other routing protocols. This table has been
deprecated. Use the alaRouteMapRedistProtoTable of Al… | table | - | .1.3.6.1.4.1.6486.800.1.2.1.10.4.1.1.1.14 |
| alaOspfIfAugTable Expansion for ospfIfTable | table | - | .1.3.6.1.4.1.6486.800.1.2.1.10.4.1.1.1.17 |
| alaOspfVirtIfAugTable Expansion for ospfVirtIfTable | table | - | .1.3.6.1.4.1.6486.800.1.2.1.10.4.1.1.1.18 |
| alaOspfRestartHelperSupport The router's support for acting as an OSPF hitless restart helper. | scalar | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.10.4.1.1.1.19 |
| alaOspfRedistRouteTag A 32-bit value tagged to each OSPF internal route that
is redistributed in to other routing protocol domains. The
lower 16-bits typically indicate the autonomous system number. | scalar | Integer32 | .1.3.6.1.4.1.6486.800.1.2.1.10.4.1.1.1.2 |
| alaOspfRestartHelperStrictLSAChecking Indicates whether or not a changed LSA will result in termination
of graceful restart by a helping router. | scalar | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.10.4.1.1.1.20 |
| alaOspfRestartHelperStatus Indicates whether this OSPF router is operating as a Helper to a
restarting router. | scalar | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.10.4.1.1.1.21 |
| alaOspfRFC1583Compatibility Indicates metrics used to choose among multiple AS-
external-LSAs. When RFC1583Compatibility is set to
enabled, only cost will be used when choosing among
multiple AS-external-LSA… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6486.800.1.2.1.10.4.1.1.1.22 |
| alaOspfOpaqueLsaSupport The router's support for Opaque LSA types. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6486.800.1.2.1.10.4.1.1.1.23 |
| alaOspfTrafficEngineeringSupport The router's support for OSPF traffic engineering. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6486.800.1.2.1.10.4.1.1.1.24 |
| alaOspfReferenceBandwidth Reference bandwidth in kilobits/second for
calculating default interface metrics. The
default value is 100,000 KBPS (100 MBPS) | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6486.800.1.2.1.10.4.1.1.1.25 |
| alaOspfRestartSupport The router's support for OSPF hitless restart.
Options include: no restart support, only planned
restarts or both planned and unplanned restarts. | scalar | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.10.4.1.1.1.26 |
| alaOspfRestartInterval Configured OSPF hitless restart timeout interval. | scalar | seconds Integer32 | .1.3.6.1.4.1.6486.800.1.2.1.10.4.1.1.1.27 |
| alaOspfRestartStatus Current status of OSPF hitless restart. The status of hitless restart is
unplannedRestart after a CMM takeover. Before CMM takeover, the status is
plannedRestart. | scalar | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.10.4.1.1.1.28 |
| alaOspfRestartAge Remaining time in current OSPF hitless restart
interval. | scalar | seconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6486.800.1.2.1.10.4.1.1.1.29 |
| alaOspfTimerSpfDelay Number of seconds to delay the SPF calculation after
receiving a topology change. This value should not be
greater than SPF hold time. | scalar | Integer32 | .1.3.6.1.4.1.6486.800.1.2.1.10.4.1.1.1.3 |
| alaOspfRestartExitReason Describes the outcome of the last attempt at a
hitless restart. If the value is 'none', no restart
has yet been attempted. If the value is 'inProgress',
a restart attempt is curre… | scalar | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.10.4.1.1.1.30 |
| alaOspfNbrAugTable Extensions to the ospfNbrTable | table | - | .1.3.6.1.4.1.6486.800.1.2.1.10.4.1.1.1.31 |
| alaOspfVirtNbrAugTable Extensions to ospfVirtNbrTable | table | - | .1.3.6.1.4.1.6486.800.1.2.1.10.4.1.1.1.32 |
| alaOspfRestartInitiate Initiates a planned graceful restart, if set to plannedRestart. | scalar | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.10.4.1.1.1.33 |
| alaOspfAreaAugTable Extensions to ospfAreaTable | table | - | .1.3.6.1.4.1.6486.800.1.2.1.10.4.1.1.1.35 |
| alaOspfExtLsdbAugTable Extensions to ospfExtLsdbTable | table | - | .1.3.6.1.4.1.6486.800.1.2.1.10.4.1.1.1.36 |
| alaOspfAreaInterfaceTable obsolete This table holds the mapping between area ID and the interfaces attached to it | table | - | .1.3.6.1.4.1.6486.800.1.2.1.10.4.1.1.1.37 |
| alaOspfAreaAggregateAugTable Extensions to ospfAreaAggregateTable | table | - | .1.3.6.1.4.1.6486.800.1.2.1.10.4.1.1.1.38 |
| alaOspfDefaultOriginate Indicates whether this ASBR router originates the default route
into the OSPF normal area(s). If set to 'only', the default route
is advertised into the OSPF normal area, provi… | scalar | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.10.4.1.1.1.39 |
| alaOspfTimerSpfHold Minimum time, in seconds, between two consecutive SPF
calculations. This value should not be less than SPF delay time. | scalar | Integer32 | .1.3.6.1.4.1.6486.800.1.2.1.10.4.1.1.1.4 |
| alaOspfDefaultOriginateMetricType Type of metric to be used with the default route. | scalar | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.10.4.1.1.1.40 |
| alaOspfDefaultOriginateMetric Default metric to be used for the default route. | scalar | Integer32 | .1.3.6.1.4.1.6486.800.1.2.1.10.4.1.1.1.41 |
| alaOspfBfdStatus Enables or disables bfd for OSPF protocol | scalar | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.10.4.1.1.1.42 |
| alaOspfBfdAllInterfaceStatus Enables or disables bfd for all OSPF interfaces | scalar | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.10.4.1.1.1.43 |
| alaOspfOpaqueTransitCapability Enables or disables opaque LSA accept and retransmit capability for OSPF | scalar | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.10.4.1.1.1.44 |
| alaOspfRouteNumber The number of network routes in OSPF routing table. | scalar | SNMPv2-SMICounter32 | .1.3.6.1.4.1.6486.800.1.2.1.10.4.1.1.1.7 |
| alaOspfMTUCheck Enable or disable the check for MTU size in database description
packets. Disabled by default | scalar | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.10.4.1.1.1.8 |
| alaOspfAsBdrRtr deprecated Enable or disable the switch being configured as an ASBR (Autonomous
System Border Router. NOT SUPPORTED - Use IETF_OSPF.mib variable ospfASBdrRtrStatus. | scalar | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.10.4.1.1.1.9 |
Child Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| alaOspfIfMd5Entry The OSPF Interface MD5 Entry describes the MD5 key
management for OSPF interfaces. | row | - | .1.3.6.1.4.1.6486.800.1.2.1.10.4.1.1.1.16.1 |