alaDvmrpNeighborTimeout
ALCATEL-IND1-DVMRP-MIB ·
.1.3.6.1.4.1.6486.800.1.2.1.10.7.1.1.1.4
Object
scalar
r/w
seconds Integer32
The Neighbor Timeout value specifies how long, without any activity from a neighboring DVMRP router, the router will wait before assuming that the inactive router is down.
Context
- MIB
- ALCATEL-IND1-DVMRP-MIB
- OID
.1.3.6.1.4.1.6486.800.1.2.1.10.7.1.1.1.4- Type
- scalar
- Access
- readwrite
- Status
- current
- Units
- seconds
- Parent
- alaDvmrpGlobalConfig
- Siblings
- 12
Syntax
seconds Integer32
Values & Constraints
Object Constraints
range: 5-86400
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| alaDvmrpAdminStatus Administratively enables/disables the
DVMRP protocol on this router. | scalar | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.10.7.1.1.1.1 |
| alaDvmrpGraftRetransmission The Graft message Retransmission value defines
the duration of time that the router will wait
before retransmitting a graft message, if it has
not already received an acknowledgem… | scalar | seconds Integer32 | .1.3.6.1.4.1.6486.800.1.2.1.10.7.1.1.1.10 |
| alaDvmrpInitNbrAsSubord The value true(1) indicates neighbors, on initial discovery,
are considered subordinate. This means traffic may be resumed
slightly quicker on network disruptions. But, if the n… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6486.800.1.2.1.10.7.1.1.1.11 |
| alaDvmrpBfdStatus Enables/Disables Bfd for DVMRP Protocol. | scalar | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.10.7.1.1.1.12 |
| alaDvmrpBfdAllInterfaceStatus Enables/Disables Bfd for all DVMRP interfaces. | scalar | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.10.7.1.1.1.13 |
| alaDvmrpRouteReportInterval The Route Report Interval determines how often
a router will send its complete routing tables to
neighboring routers running DVMRP. | scalar | seconds Integer32 | .1.3.6.1.4.1.6486.800.1.2.1.10.7.1.1.1.2 |
| alaDvmrpFlashUpdateInterval The minimum Flash Update Interval defines how often
routing table change messages are sent to
neighboring DVMRP routers. Since these messages
are sent between the transmission of… | scalar | seconds Integer32 | .1.3.6.1.4.1.6486.800.1.2.1.10.7.1.1.1.3 |
| alaDvmrpRouteExpirationTimeout The Route Expiration Timeout value specifies how
long the router will wait before aging out a route.
When this value expires, the route is advertised as
inactive until either it's… | scalar | seconds Integer32 | .1.3.6.1.4.1.6486.800.1.2.1.10.7.1.1.1.5 |
| alaDvmrpRouteHoldDown Specifies the time during which DVMRP routes are kept
in a hold-down state. A hold-down state refers to
the time that a route to an inactive network continues
to be advertised. | scalar | seconds Integer32 | .1.3.6.1.4.1.6486.800.1.2.1.10.7.1.1.1.6 |
| alaDvmrpNeighborProbeInterval The Neighbor Probe Interval value specifies how often
probes will be transmitted to those interfaces
with attached DVMRP neighbors. | scalar | seconds Integer32 | .1.3.6.1.4.1.6486.800.1.2.1.10.7.1.1.1.7 |
| alaDvmrpPruneLifetime The Prune Lifetime value defines the value
whereby a source-rooted multicast tree will be
pruned. | scalar | seconds Integer32 | .1.3.6.1.4.1.6486.800.1.2.1.10.7.1.1.1.8 |
| alaDvmrpPruneRetransmission The Prune Packet Retransmission value is the duration
of time that the router will wait, if it continues
to receive unwanted multicast traffic, before
retransmitting a prune messa… | scalar | seconds Integer32 | .1.3.6.1.4.1.6486.800.1.2.1.10.7.1.1.1.9 |