sdpBndIgmpSnpgCfgGenQueryIntvl
ALCATEL-IGMP-SNOOPING-MIB ·
.1.3.6.1.4.1.6527.3.3.2.2.3.1.1.5
Object
column
r/w
seconds Unsigned32
The value of the object sdpBndIgmpSnpgCfgGenQueryIntvl specifies the
interval (in seconds) between two consecutive general queries sent by
the system on this SDP.
The value of this object is only meaningful when the value of
sdpBndIgmpSnpgCfgSendQueries is 'enabled(1)'.
Context
- MIB
- ALCATEL-IGMP-SNOOPING-MIB
- OID
.1.3.6.1.4.1.6527.3.3.2.2.3.1.1.5- Type
- column
- Access
- readwrite
- Status
- current
- Units
- seconds
- Parent
- sdpBindIgmpSnpgConfigEntry
- Table
- sdpBindIgmpSnpgConfigTable
- Siblings
- 22
Syntax
seconds Unsigned32
Values & Constraints
Enumerated Values
1 | disconnected |
2 | connected |
3 | bad |
Object Constraints
range: 2-1024
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| sdpBndIgmpSnpgCfgImportPlcy The value of the object sdpBndIgmpSnpgCfgImportPlcy specifies a policy
statement that must be applied to all incoming IGMP messages on this
SDP Bind. | column | TIMETRA-TC-MIBTPolicyStatementNameOrEmpty | .1.3.6.1.4.1.6527.3.3.2.2.3.1.1.1 |
| sdpBndIgmpSnpgCfgVersion The value of the object sdpBndIgmpSnpgCfgVersion specifies the version
of IGMP running on this SDP bind. | column | TIMETRA-TC-MIBTmnxIgmpVersion | .1.3.6.1.4.1.6527.3.3.2.2.3.1.1.10 |
| sdpBndIgmpSnpgCfgMcacPolicyName The value of sdpBndIgmpSnpgCfgMcacPolicyName indicates the name of the
multicast CAC policy. | column | TIMETRA-TC-MIBTPolicyStatementNameOrEmpty | .1.3.6.1.4.1.6527.3.3.2.2.3.1.1.11 |
| sdpBndIgmpSnpgCfgMcacUnconstBW The value of sdpBndIgmpSnpgCfgMcacUnconstBW specifies the bandwidth
assigned for interface's multicast CAC policy traffic in kilobits per
second(kbps).
If the defau… | column | kilobps Integer32 | .1.3.6.1.4.1.6527.3.3.2.2.3.1.1.12 |
| sdpBndIgmpSnpgCfgMcacPrRsvMndBW The value of sdpBndIgmpSnpgCfgMcacPrRsvMndBW specifies the bandwidth
pre-reserved for all the mandatory channels on a given interface in
kilobits per second(kbps).
… | column | kilobps Integer32 | .1.3.6.1.4.1.6527.3.3.2.2.3.1.1.13 |
| sdpBndIgmpSnpgCfgMcacinUseMndBw The value of sdpBndIgmpSnpgCfgMcacinUseMndBw indicates the in-use
bandwidth in kilobits per second(kbps) for the mandatory channels for
this protocol interface instance. | column | kilobps SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6527.3.3.2.2.3.1.1.14 |
| sdpBndIgmpSnpgCfgMcacinUseOplBw The value of sdpBndIgmpSnpgCfgMcacinUseOplBw indicates the in-use
bandwidth in kilobits per second(kbps) for the optional channels for
this protocol interface instance. | column | kilobps SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6527.3.3.2.2.3.1.1.15 |
| sdpBndIgmpSnpgCfgMcacAvailMndBw The value of sdpBndIgmpSnpgCfgMcacAvailMndBw indicates the
pre-reserved bandwidth in kilobits per second(kbps) for the mandatory
channels for this interface instance. | column | kilobps SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6527.3.3.2.2.3.1.1.16 |
| sdpBndIgmpSnpgCfgMcacAvailOplBw The value of sdpBndIgmpSnpgCfgMcacAvailOplBw indicates the available
bandwidth in kilobits per second(kbps) for this interface instance. | column | kilobps SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6527.3.3.2.2.3.1.1.17 |
| sdpBndIgmpSnpgCfgMcacValInTrans The value of sdpBndIgmpSnpgCfgMcacValInTrans indicates that the
operational (available and in-use mandatory/optional) value for the
following objects are in transition due to conf… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.3.2.2.3.1.1.18 |
| sdpBndIgmpSnpgCfgLastChangeTime The value of the object sdpBndIgmpSnpgCfgLastChangeTime indicates the
sysUpTime at the time of the last modification of this entry. | column | SNMPv2-TCTimeStamp | .1.3.6.1.4.1.6527.3.3.2.2.3.1.1.19 |
| sdpBndIgmpSnpgCfgFastLeave The value of the object sdpBndIgmpSnpgCfgFastLeave specifies whether
or not fastleave is allowed on this SDP bind.
If set to 'enabled(1)', the system prunes the por… | column | AlxIgmpSnpgAdminState | .1.3.6.1.4.1.6527.3.3.2.2.3.1.1.2 |
| sdpBndIgmpSnpgCfgMaxNbrSrcs The value of the object sdpBndIgmpSnpgCfgMaxNbrSrcs specifies how many
source addresses are allowed per group address for this SDP bind.
The value 0 means that no l… | column | Unsigned32 | .1.3.6.1.4.1.6527.3.3.2.2.3.1.1.20 |
| sdpBndIgmpSnpgCfgDisRtrAlertChk sdpBndIgmpSnpgCfgDisRtrAlertChk is used to enable/disable router alert
checking for IGMP messages received on this sdp.
If this flag is set to 'true', checking is d… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.3.2.2.3.1.1.21 |
| sdpBndIgmpSnpgCfgMaxNbrGrpSrcs The value of the object sdpBndIgmpSnpgCfgMaxNbrGrpSrcs specifies how
many group source addresses are allowed per group address for this SDP
bind.
The value 0 means … | column | Unsigned32 | .1.3.6.1.4.1.6527.3.3.2.2.3.1.1.22 |
| sdpBndIgmpSnpgCfgMcacIfPlcyName The value of sdpBndIgmpSnpgCfgMcacIfPlcyName indicates the name of the
multicast CAC interface policy. | column | TIMETRA-TC-MIBTPolicyStatementNameOrEmpty | .1.3.6.1.4.1.6527.3.3.2.2.3.1.1.23 |
| sdpBndIgmpSnpgCfgMRouter The value of the object sdpBndIgmpSnpgCfgMRouter specifies whether
whether a multicast router is attached behind this SDP.
If sdpBndIgmpSnpgCfgSendQueries is set to… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.3.2.2.3.1.1.3 |
| sdpBndIgmpSnpgCfgSendQueries The value of the object sdpBndIgmpSnpgCfgSendQueries specifies whether
the system generates General Queries by itself on this SDP. | column | AlxIgmpSnpgAdminState | .1.3.6.1.4.1.6527.3.3.2.2.3.1.1.4 |
| sdpBndIgmpSnpgCfgQueryRespIntvl The value of the object sdpBndIgmpSnpgCfgQueryRespIntvl specifies the
maximum response time (in seconds) advertised in IGMPv2/v3 queries.
The value of this object i… | column | seconds Unsigned32 | .1.3.6.1.4.1.6527.3.3.2.2.3.1.1.6 |
| sdpBndIgmpSnpgCfgRobustCount The value of the object sdpBndIgmpSnpgCfgRobustCount specifies the
value of the Robust count.
This object allows tuning for the expected packet loss on this SDP. If… | column | Unsigned32 | .1.3.6.1.4.1.6527.3.3.2.2.3.1.1.7 |
| sdpBndIgmpSnpgCfgLastMembIntvl The value of the object sdpBndIgmpSnpgCfgLastMembIntvl specifies the
Max Response Time (in deciseconds) used in Group-Specific and
Group-Source-Specific Queries sent in response t… | column | deciseconds Unsigned32 | .1.3.6.1.4.1.6527.3.3.2.2.3.1.1.8 |
| sdpBndIgmpSnpgCfgMaxNbrGrps The value of the object sdpBndIgmpSnpgCfgMaxNbrGrps specifies how many
group addresses are allowed for this SDP bind. The value 0 means that
no limit is imposed. | column | Integer32 | .1.3.6.1.4.1.6527.3.3.2.2.3.1.1.9 |