sapIgmpSnpgCfgMcacPrRsvMndBW
ALCATEL-IGMP-SNOOPING-MIB ·
.1.3.6.1.4.1.6527.3.3.2.2.2.1.1.17
Object
column
r/w
kilobps Integer32
The value of sapIgmpSnpgCfgMcacPrRsvMndBW specifies the bandwidth
pre-reserved for all the mandatory channels on a given interface in
kilobits per second(kbps).
If the value of sapIgmpSnpgCfgMcacUnconstBW is '0', no mandatory
channels are allowed. If the value of sapIgmpSnpgCfgMcacPrRsvMndBW is
'-1', then all mandatory and optional channels are allowed.
If the value of sapIgmpSnpgCfgMcacPrRsvMndBW is equal to the value of
sapIgmpSnpgCfgMcacUnconstBW, then all the unconstrained bandwidth on a
given interface is allocated to mandatory channels configured through
multicast CAC policy on that interface and no optional groups
(channels) are allowed.
The value of sapIgmpSnpgCfgMcacPrRsvMndBW should always be less than
or equal to that of sapIgmpSnpgCfgMcacUnconstBW. An attempt to set the
value of sapIgmpSnpgCfgMcacPrRsvMndBW greater than that of
sapIgmpSnpgCfgMcacUnconstBW will result in inconsistent value error.
Context
- MIB
- ALCATEL-IGMP-SNOOPING-MIB
- OID
.1.3.6.1.4.1.6527.3.3.2.2.2.1.1.17- Type
- column
- Access
- readwrite
- Status
- current
- Units
- kilobps
- Parent
- sapIgmpSnpgConfigEntry
- Table
- sapIgmpSnpgConfigTable
- Siblings
- 27
Syntax
kilobps Integer32
Values & Constraints
Object Constraints
range: 1-16
range: -1-2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| sapIgmpSnpgCfgImportPlcy The value of the object sapIgmpSnpgCfgImportPlcy specifies the policy
statement that must be applied to all incoming IGMP messages on this
SAP. | column | TIMETRA-TC-MIBTPolicyStatementNameOrEmpty | .1.3.6.1.4.1.6527.3.3.2.2.2.1.1.1 |
| sapIgmpSnpgCfgMvrFromVplsId The value of the object sapIgmpSnpgCfgMvrFromVplsId specifies from
which Tls the multicast streams corresponding to the groups learned
via this SAP are copied.
Grou… | column | TIMETRA-TC-MIBTmnxServId | .1.3.6.1.4.1.6527.3.3.2.2.2.1.1.10 |
| sapIgmpSnpgCfgMvrToSapPortId The value of the object sapIgmpSnpgCfgMvrToSapPortId specifies,
together with sapIgmpSnpgCfgMvrToSapEncapVal, the SAP to which the
multicast streams corresponding to the groups le… | column | TIMETRA-TC-MIBTmnxPortID | .1.3.6.1.4.1.6527.3.3.2.2.2.1.1.11 |
| sapIgmpSnpgCfgMvrToSapEncapVal The value of the object sapIgmpSnpgCfgMvrToSapEncapVal specifies,
together with sapIgmpSnpgCfgMvrToSapPortId, the SAP to which the
multicast streams corresponding to the groups le… | column | TIMETRA-TC-MIBTmnxEncapVal | .1.3.6.1.4.1.6527.3.3.2.2.2.1.1.12 |
| sapIgmpSnpgCfgVersion The value of the object sapIgmpSnpgCfgVersion specifies the version of
IGMP running on this SAP. | column | TIMETRA-TC-MIBTmnxIgmpVersion | .1.3.6.1.4.1.6527.3.3.2.2.2.1.1.13 |
| sapIgmpSnpgCfgMcacPolicyName The value of sapIgmpSnpgCfgMcacPolicyName specifies the name of the
multicast CAC (Connection Admission Control) policy. | column | TIMETRA-TC-MIBTPolicyStatementNameOrEmpty | .1.3.6.1.4.1.6527.3.3.2.2.2.1.1.14 |
| sapIgmpSnpgCfgMcacUnconstBW The value of sapIgmpSnpgCfgMcacUnconstBW specifies the bandwidth
assigned for interface's multicast CAC policy traffic in kilobits per
second(kbps).
If the default … | column | kilobps Integer32 | .1.3.6.1.4.1.6527.3.3.2.2.2.1.1.15 |
| sapIgmpSnpgCfgMcacConstAdmSt The value of sapIgmpSnpgCfgMcacConstAdmSt specifies the administrative
state of the multicast CAC policy's constraints. | column | TIMETRA-TC-MIBTmnxAdminState | .1.3.6.1.4.1.6527.3.3.2.2.2.1.1.16 |
| sapIgmpSnpgCfgMcacinUseMandBw The value of sapIgmpSnpgCfgMcacinUseMandBw indicates the in-use
bandwidth in kilobits per second(kbps) for the mandatory channels for
this protocol interface instance. | column | kilobps SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6527.3.3.2.2.2.1.1.18 |
| sapIgmpSnpgCfgMcacinUseOpnlBw The value of sapIgmpSnpgCfgMcacinUseOpnlBw indicates the in-use
bandwidth in kilobits per second(kbps) for the optional channels for
this protocol interface instance. | column | kilobps SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6527.3.3.2.2.2.1.1.19 |
| sapIgmpSnpgCfgFastLeave The value of the object sapIgmpSnpgCfgFastLeave specifies whether fast
leave is allowed on this SAP.
If set to 'enabled(1)', the system prunes the port on which an … | column | AlxIgmpSnpgAdminState | .1.3.6.1.4.1.6527.3.3.2.2.2.1.1.2 |
| sapIgmpSnpgCfgMcacAvailMandBw The value of sapIgmpSnpgCfgMcacAvailMandBw indicates the pre-reserved
bandwidth in kilobits per second(kbps) for the mandatory channels for
this interface instance. | column | kilobps SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6527.3.3.2.2.2.1.1.20 |
| sapIgmpSnpgCfgMcacAvailOpnlBw The value of sapIgmpSnpgCfgMcacAvailOpnlBw indicates the available
bandwidth in kilobits per second(kbps) for this interface instance. | column | kilobps SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6527.3.3.2.2.2.1.1.21 |
| sapIgmpSnpgCfgMcacValInTrans The value of sapIgmpSnpgCfgMcacValInTrans indicates that the
operational (available and in-use mandatory/optional) value for the
following objects are in transition due to configu… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.3.2.2.2.1.1.22 |
| sapIgmpSnpgCfgLastChangeTime The value of the object sapIgmpSnpgCfgLastChangeTime indicates the
sysUpTime at the time of the last modification of this entry. | column | SNMPv2-TCTimeStamp | .1.3.6.1.4.1.6527.3.3.2.2.2.1.1.23 |
| sapIgmpSnpgCfgMaxNbrSrcs The value of the object sapIgmpSnpgCfgMaxNbrSrcs specifies how many
source addresses are allowed per group address for this SAP.
The value 0 means that no limit is … | column | Unsigned32 | .1.3.6.1.4.1.6527.3.3.2.2.2.1.1.24 |
| sapIgmpSnpgCfgDisRtrAlertChk sapIgmpSnpgCfgDisRtrAlertChk is used to enable/disable router alert
checking for IGMP messages received on this sap.
If this flag is set to 'true', checking is disa… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.3.2.2.2.1.1.25 |
| sapIgmpSnpgCfgMaxNbrGrpSrcs The value of the object sapIgmpSnpgCfgMaxNbrGrpSrcs specifies how many
group source addresses are allowed per group address for this SAP.
The value 0 means that no … | column | Unsigned32 | .1.3.6.1.4.1.6527.3.3.2.2.2.1.1.26 |
| sapIgmpSnpgCfgMcacUseLagPortWt The value of sapIgmpSnpgCfgMcacUseLagPortWt specifies if this system
must use the LAG port weight while calculating Multicast CAC
constraints.
The LAG port weight i… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.3.2.2.2.1.1.27 |
| sapIgmpSnpgCfgMcacIfPolicyName The value of sapIgmpSnpgCfgMcacIfPolicyName specifies the name of the
multicast CAC (Connection Admission Control) interface policy. | column | TIMETRA-TC-MIBTPolicyStatementNameOrEmpty | .1.3.6.1.4.1.6527.3.3.2.2.2.1.1.28 |
| sapIgmpSnpgCfgMRouter The value of the object sapIgmpSnpgCfgMRouter specifies whether a
multicast router is attached behind this SAP.
If sapIgmpSnpgCfgSendQueries is set to 'enabled(1)',… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.3.2.2.2.1.1.3 |
| sapIgmpSnpgCfgSendQueries The value of the object sapIgmpSnpgCfgSendQueries specifies whether
the system generates General Queries by itself on this SAP. | column | AlxIgmpSnpgAdminState | .1.3.6.1.4.1.6527.3.3.2.2.2.1.1.4 |
| sapIgmpSnpgCfgGenQueryIntvl The value of the object sapIgmpSnpgCfgGenQueryIntvl specifies the
interval (in seconds) between two consecutive general queries sent by
the system on this SAP.
The … | column | seconds Unsigned32 | .1.3.6.1.4.1.6527.3.3.2.2.2.1.1.5 |
| sapIgmpSnpgCfgQueryRespIntvl The value of the object sapIgmpSnpgCfgQueryRespIntvl specifies the
maximum response time (in seconds) advertised in IGMPv2/v3 queries.
The value of this object is o… | column | seconds Unsigned32 | .1.3.6.1.4.1.6527.3.3.2.2.2.1.1.6 |
| sapIgmpSnpgCfgRobustCount The value of the object sapIgmpSnpgCfgRobustCount specifies the
robustness variable on this SAP.
This object allows tuning for the expected packet loss on this SAP.… | column | Unsigned32 | .1.3.6.1.4.1.6527.3.3.2.2.2.1.1.7 |
| sapIgmpSnpgCfgLastMembIntvl The value of the object sapIgmpSnpgCfgLastMembIntvl specifies the Max
Response Time (in deciseconds) used in Group-Specific and
Group-Source-Specific Queries sent in response to '… | column | deciseconds Unsigned32 | .1.3.6.1.4.1.6527.3.3.2.2.2.1.1.8 |
| sapIgmpSnpgCfgMaxNbrGrps The value of the object sapIgmpSnpgCfgMaxNbrGrps specifies how many
group addresses are allowed for this SAP.
The value 0 means that no limit is imposed. | column | Integer32 | .1.3.6.1.4.1.6527.3.3.2.2.2.1.1.9 |