vRtrIfDHCPLayer2Header
ALCATEL-ENT1-TIMETRA-VRTR-MIB ·
.1.3.6.1.4.1.6527.3.1.2.3.19.1.34
Object
The value of vRtrIfDHCPLayer2Header specificies,
together with the value of object vRtrIfDHCPAntiSpoofMacAddr,
the MAC address that is used in anti-spoof entries for the lease
states on this interface.
When it is set to 'false (2)', the client hardware address from the
DHCP payload, stored in ALCATEL-ENT1-TIMETRA-SERV-MIB::svcDhcpLseStateChAddr,
is used.
When it is set to 'true (1)', the behavior depends on the value of
vRtrIfDHCPAntiSpoofMacAddr. If vRtrIfDHCPAntiSpoofMacAddr is set to
all zeros, the source MAC address in the L2 header of the DHCP packet
is used. If vRtrIfDHCPAntiSpoofMacAddr is configured, then its value
is used.
Context
- MIB
- ALCATEL-ENT1-TIMETRA-VRTR-MIB
- OID
.1.3.6.1.4.1.6527.3.1.2.3.19.1.34- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- vRtrIfDHCPEntry
- Table
- vRtrIfDHCPTable
- Siblings
- 35
Values & Constraints
Type Values
1 | true |
2 | false |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| vRtrIfDHCPRelayInfoOption obsolete vRtrIfDHCPRelayInfoOption is used to enable/disable DHCP
Option 82. If the value of this object is set to 'false', DHCP
Relay is disabled. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.3.19.1.1 |
| vRtrIfDHCPRelayServer5 vRtrIfDHCPRelayServer5 is used to configure the fifth DHCP server
where the requests will be forwarded. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.6527.3.1.2.3.19.1.10 |
| vRtrIfDHCPRelayServer6 vRtrIfDHCPRelayServer6 is used to configure the sixth DHCP server
where the requests will be forwarded. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.6527.3.1.2.3.19.1.11 |
| vRtrIfDHCPRelayServer7 vRtrIfDHCPRelayServer7 is used to configure the seventh DHCP server
where the requests will be forwarded. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.6527.3.1.2.3.19.1.12 |
| vRtrIfDHCPRelayServer8 vRtrIfDHCPRelayServer8 is used to configure the eighth DHCP server
where the requests will be forwarded. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.6527.3.1.2.3.19.1.13 |
| vRtrIfDHCPRelayTrusted When the value of vRtrIfDHCPRelayTrusted is set to 'true(1)', the
router will relay requests where the DHCP giaddr is zero. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.3.19.1.14 |
| vRtrIfDHCPAdminState vRtrIfDHCPAdminState is used to configure the desired
administrative state of DHCP on this interface.
If the value of vRtrIfType is network this object can only be set
to 'outOfSe… | column | ALCATEL-ENT1-TIMETRA-TC-MIBTmnxAdminState | .1.3.6.1.4.1.6527.3.1.2.3.19.1.15 |
| vRtrIfDHCPSnooping obsolete vRtrIfDHCPSnooping is used to enable/disable snooping of DHCP
packets received on interface. | column | Enumeration | .1.3.6.1.4.1.6527.3.1.2.3.19.1.16 |
| vRtrIfDHCPDescription The value of vRtrIfDHCPDescription is a user provided description
string for DHCP on this virtual router interface. It can consist of
any printable, seven-bit ASCII characters up… | column | ALCATEL-ENT1-TIMETRA-TC-MIBTItemDescription | .1.3.6.1.4.1.6527.3.1.2.3.19.1.17 |
| vRtrIfDHCPAutoFilterId obsolete vRtrIfDHCPAutoFilterId maintains the auto-filter identifier being
used for this interface. | column | ALCATEL-ENT1-TIMETRA-FILTER-MIBTFilterID | .1.3.6.1.4.1.6527.3.1.2.3.19.1.18 |
| vRtrIfDHCPOperAutoFilter obsolete The value of vRtrIfDHCPOperAutoFilter indicates the number of active
auto-filter entries per interface. These entries are created in the
ALCATEL-ENT1-TIMETRA-FILTER-MIB::tIPFilter… | column | Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.3.19.1.19 |
| vRtrIfDHCPRelayInfoAction vRtrIfDHCPRelayInfoAction is used to configure the DHCP Relay
reforwarding policy.
replace(1) - replace existing information with
DHCP relay informatio… | column | Enumeration | .1.3.6.1.4.1.6527.3.1.2.3.19.1.2 |
| vRtrIfDHCPAuthPolicy Defines which subscriber authentication policy must be applied when a
subscriber message (e.g. DHCP, PPPoE, ...) is received on the
interface.
The authentication policy must be de… | column | ALCATEL-ENT1-TIMETRA-TC-MIBTPolicyStatementNameOrEmpty | .1.3.6.1.4.1.6527.3.1.2.3.19.1.20 |
| vRtrIfDHCPLeasePopulate The value of the object vRtrIfDHCPLeasePopulate specifies the
maximum number of DHCP lease states allowed on this interface. | column | Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.3.19.1.21 |
| vRtrIfDHCPOperLeasePopulate The value of the object vRtrIfDHCPOperLeasePopulate indicates the
maximum number of DHCP lease states allocated on this interface. | column | Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.3.19.1.22 |
| vRtrIfDHCPGiAddressType The value of vRtrIfDHCPGiAddressType specifies the type of
vRtrIfDHCPGiAddress, the gateway interface address. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.6527.3.1.2.3.19.1.23 |
| vRtrIfDHCPGiAddress The value of vRtrIfDHCPGiAddress specifies the gateway interface
address. The type of this address is specified by the value of
vRtrIfDHCPGiAddressType. | column | OctetString | .1.3.6.1.4.1.6527.3.1.2.3.19.1.24 |
| vRtrIfDHCPGiAddressAsSrc The value of vRtrIfDHCPGiAddressAsSrc specifies whether the DHCP
relay should use the gateway interface address as the source IP
address when communicating with the DHCP server. W… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.3.19.1.25 |
| vRtrIfDHCPMatchOption82 The value of vRtrIfDHCPMatchOption82 specifies whether the
DHCP relay should use the circuit ID in the option 82 field
in DHCP packets to match DHCP messages. When it is set to 't… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.3.19.1.26 |
| vRtrIfDHCPRelayRemoteIdStr The value of vRtrIfDHCPRelayRemoteIdStr specifies the remote-id
in the DHCP Relay packet if value of vRtrIfDHCPRelayRemoteId is set
to 'remote-id'. | column | OctetString | .1.3.6.1.4.1.6527.3.1.2.3.19.1.27 |
| vRtrIfDHCPProxyAdminState The value of vRtrIfDHCPProxyAdminState specifies the desired
administrative state of the proxy server on this interface.
When it is set to 'inService', the proxy se… | column | ALCATEL-ENT1-TIMETRA-TC-MIBTmnxAdminState | .1.3.6.1.4.1.6527.3.1.2.3.19.1.28 |
| vRtrIfDHCPProxyServerAddr The value of vRtrIfDHCPProxyServerAddr specifies the IP address
which will be used as the source address of the emulated DHCP server.
If this IP address is not conf… | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.6527.3.1.2.3.19.1.29 |
| vRtrIfDHCPRelayCircuitId The value of the object vRtrIfDHCPRelayCircuitId specifies whether or
not the circuit-id suboption is present, and if it is present what
information goes in it.
If the value of th… | column | Enumeration | .1.3.6.1.4.1.6527.3.1.2.3.19.1.3 |
| vRtrIfDHCPProxyLeaseTime The value of vRtrIfDHCPProxyLeaseTime specifies in seconds how long a
DHCP client is allowed to use the offered IP address.
Value 0 means the lease time provided by… | column | seconds Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.3.19.1.30 |
| vRtrIfDHCPProxyLTRadiusOverride The value of vRtrIfDHCPProxyLTRadiusOverride specifies whether or not
the lease time provided by the RADIUS server is presented to the DHCP
client.
By default the p… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.3.19.1.31 |
| vRtrIfDHCPVendorIncludeOptions The value of vRtrIfDHCPVendorIncludeOptions specifies what is
encoded in the Alcatel vendor specific sub-option of option 82.
The value of this object is only used … | column | Bits | .1.3.6.1.4.1.6527.3.1.2.3.19.1.32 |
| vRtrIfDHCPVendorOptionString The value of vRtrIfDHCPVendorOptionString specifies the string that
goes into the Alcatel vendor specific sub-option of option 82.
This string is only used when vRt… | column | OctetString | .1.3.6.1.4.1.6527.3.1.2.3.19.1.33 |
| vRtrIfDHCPAntiSpoofMacAddr The value of vRtrIfDHCPAntiSpoofMacAddr specifies,
together with the value of object vRtrIfDHCPLayer2Header,
the MAC address that is used in anti-spoof entries for the lease
state… | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.6527.3.1.2.3.19.1.35 |
| vRtrIfDHCPClientApplications The value of vRtrIfDHCPClientApplications specifies the set of
client applications that can make use of the DHCP relay functionality
on this interface. | column | Bits | .1.3.6.1.4.1.6527.3.1.2.3.19.1.36 |
| vRtrIfDHCPRelayRemoteId The value of vRtrIfDHCPRelayRemoteId specifies what information goes
into the remote-id suboption in the DHCP Relay packet. If the
value of this object is set to 'none', the remo… | column | Enumeration | .1.3.6.1.4.1.6527.3.1.2.3.19.1.4 |
| vRtrIfDHCPAutoFilter obsolete vRtrIfDHCPAutoFilter allows the router to automatically build
anti-spoofing filter lists. When this object is set to a non-zero
value, auto-filtering is enabled and a filter allow… | column | Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.3.19.1.5 |
| vRtrIfDHCPRelayServer1 vRtrIfDHCPRelayServer1 is used to configure the first DHCP server
where the requests will be forwarded. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.6527.3.1.2.3.19.1.6 |
| vRtrIfDHCPRelayServer2 vRtrIfDHCPRelayServer2 is used to configure the second DHCP server
where the requests will be forwarded. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.6527.3.1.2.3.19.1.7 |
| vRtrIfDHCPRelayServer3 vRtrIfDHCPRelayServer3 is used to configure the third DHCP server
where the requests will be forwarded. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.6527.3.1.2.3.19.1.8 |
| vRtrIfDHCPRelayServer4 vRtrIfDHCPRelayServer4 is used to configure the fourth DHCP server
where the requests will be forwarded. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.6527.3.1.2.3.19.1.9 |