svcEndPointForceSwitchOverSdpId

ALCATEL-ENT1-TIMETRA-SERV-MIB · .1.3.6.1.4.1.6527.3.1.2.4.2.19.1.10
MIB view Table view

Object

column r/w ALCATEL-ENT1-TIMETRA-TC-MIBSdpBindId 
The value of svcEndPointForceSwitchOverSdpId specifies the SDP
bind to switch over to when svcEndPointForceSwitchOver is set
to 'doAction'. If the value of this object is non default, it 
indicates that a forced switchover has taken place. Setting 
this object to the default value clears any previous forced 
switchover.

Context

MIB
ALCATEL-ENT1-TIMETRA-SERV-MIB
OID
.1.3.6.1.4.1.6527.3.1.2.4.2.19.1.10
Type
column
Access
readwrite
Status
current
Parent
svcEndPointEntry
Table
svcEndPointTable
Siblings
18

Syntax

ALCATEL-ENT1-TIMETRA-TC-MIBSdpBindId
Source
ALCATEL-ENT1-TIMETRA-TC-MIBSdpBindId
Base type
OctetString

Values & Constraints

Type Constraints
range: 8

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
svcEndPointName
The value of svcEndPointName specifies the name of the service endpoint.
columnALCATEL-ENT1-TIMETRA-TC-MIBTNamedItem.1.3.6.1.4.1.6527.3.1.2.4.2.19.1.1
svcEndPointActiveHoldDelay
The value of svcEndPointActiveHoldDelay specifies the amount of time in deci-seconds to hold the active state before going into the standby state when a local MC-LAG SAP goes down.
columndeci-seconds Unsigned32.1.3.6.1.4.1.6527.3.1.2.4.2.19.1.11
svcEndPointIgnoreStandbySig
The value of svcEndPointIgnoreStandbySig specifies whether the local internal tasks will take into account the 'pseudo-wire forwarding standby' bit received from the LDP peer whic…
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.6527.3.1.2.4.2.19.1.12
svcEndPointMacPinning
The value of svcEndPointMacPinning specifies whether or not MAC address pinning is active on this end-point.
columnALCATEL-ENT1-TIMETRA-TC-MIBTmnxEnabledDisabled.1.3.6.1.4.1.6527.3.1.2.4.2.19.1.13
svcEndPointMacLimit
The value of the object svcEndPointMacLimit specifies the maximum number of learned and static entries allowed for this end-point. The value 0 means: no limit for t…
columnInteger32.1.3.6.1.4.1.6527.3.1.2.4.2.19.1.14
svcEndPointSuppressStandbySig
The value of the object svcEndPointSuppressStandbySig specifies whether the 'pseudo wire forwarding standby' bit will be sent to the LDP peer whenever the spoke SDP 'svcEndPointTx…
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.6527.3.1.2.4.2.19.1.15
svcEndPointRevertTimeCountDn
The value of svcEndPointRevertTimeCountDn indicates the timer count down before reverting back to the primary spoke-sdp defined on this service endpoint, after having failed over …
columnseconds Integer32.1.3.6.1.4.1.6527.3.1.2.4.2.19.1.16
svcEndPointTxActiveChangeCount
The value of svcEndPointTxActiveChangeCount indicates the number of times active transmit change has taken place in this endpoint.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.6527.3.1.2.4.2.19.1.17
svcEndPointTxActiveLastChange
The value of svcEndPointTxActiveLastChange indicates the value of sysUpTime at the time of the last active transmit change in this endpoint.
columnSNMPv2-TCTimeStamp.1.3.6.1.4.1.6527.3.1.2.4.2.19.1.18
svcEndPointTxActiveUpTime
The value of svcEndPointTxActiveUpTime indicates the active 'up' time (in hundredths of a second) of the end-point object that is current transmit active.
columnSNMPv2-SMITimeTicks.1.3.6.1.4.1.6527.3.1.2.4.2.19.1.19
svcEndPointRowStatus
The value of svcEndPointRowStatus is used for the creation and deletion of service endpoints.
columnSNMPv2-TCRowStatus.1.3.6.1.4.1.6527.3.1.2.4.2.19.1.2
svcEndPointDescription
The value of svcEndPointDescription specifies the textual description of this service endpoint.
columnServObjDesc.1.3.6.1.4.1.6527.3.1.2.4.2.19.1.3
svcEndPointRevertTime
The value of svcEndPointRevertTime specifies the time to wait before reverting back to the primary spoke-sdp defined on this service endpoint, after having failed over to a backup…
columnseconds Integer32.1.3.6.1.4.1.6527.3.1.2.4.2.19.1.4
svcEndPointTxActiveType
The value of svcEndPointTxActiveType indicates the type of end-point object that is current transmit active.
columnEnumeration.1.3.6.1.4.1.6527.3.1.2.4.2.19.1.5
svcEndPointTxActivePortId
The value of svcEndPointTxActivePortId indicates the Port ID of the SAP that is transmit active. This object is only valid when svcEndPointTxActiveType is 'sap'.
columnALCATEL-ENT1-TIMETRA-TC-MIBTmnxPortID.1.3.6.1.4.1.6527.3.1.2.4.2.19.1.6
svcEndPointTxActiveEncap
The value of svcEndPointTxActiveEncap indicates the encapsulation value of the SAP that is transmit active. This object is only valid when svcEndPointTxActiveType is 'sap'.
columnALCATEL-ENT1-TIMETRA-TC-MIBTmnxEncapVal.1.3.6.1.4.1.6527.3.1.2.4.2.19.1.7
svcEndPointTxActiveSdpId
The value of svcEndPointTxActiveSdpId indicates the SDP bind ID of the SDP bind that is transmit active. This object is only valid when svcEndPointTxActiveType is 'sdpBind'.
columnALCATEL-ENT1-TIMETRA-TC-MIBSdpBindId.1.3.6.1.4.1.6527.3.1.2.4.2.19.1.8
svcEndPointForceSwitchOver
The value of svcEndPointForceSwitchOver specifies whether to force a switchover of the active SDP bind. When it is set to 'doAction', the SDP bind specified by svcEndPointForceSw…
columnALCATEL-ENT1-TIMETRA-TC-MIBTmnxActionType.1.3.6.1.4.1.6527.3.1.2.4.2.19.1.9