msapTlsPlcyDhcpPrxyServAddr
ALCATEL-ENT1-TIMETRA-SAP-MIB ·
.1.3.6.1.4.1.6527.3.1.2.4.3.45.1.8
Object
column
r/w
OctetString
The value of msapTlsPlcyDhcpPrxyServAddr specifies the IP address of the
which will be used as the source address of the emulated DHCP server
in the context of the VPLS MSAP.
This address is mandatory for the proxy server capability and it
should be in the context of the subnet represented by the VPLS.
Context
- MIB
- ALCATEL-ENT1-TIMETRA-SAP-MIB
- OID
.1.3.6.1.4.1.6527.3.1.2.4.3.45.1.8- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- msapTlsPlcyEntry
- Table
- msapTlsPlcyTable
- Siblings
- 29
Syntax
OctetString
Values & Constraints
Object Constraints
range: 0-0
range: 4-4
range: 16-16
range: 20-20
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| msapTlsPlcyLastChanged The value of msapTlsPlcyLastChanged indicates the sysUpTime
at the time of the last modification of this entry.
If no changes were made to the entry since the last
… | column | SNMPv2-TCTimeStamp | .1.3.6.1.4.1.6527.3.1.2.4.3.45.1.1 |
| msapTlsPlcyDhcpPrxyLTRadOverride The value of msapTlsPlcyDhcpPrxyLTRadOverride specifies whether or not the
lease time provided by the RADIUS server is presented to the DHCP
client.
By default the… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.4.3.45.1.10 |
| msapTlsPlcyDhcpInfoAction The value of msapTlsPlcyDhcpInfoAction specifies the DHCP option
reforwarding policy:
'replace' - replace existing information with configured
infor… | column | Enumeration | .1.3.6.1.4.1.6527.3.1.2.4.3.45.1.11 |
| msapTlsPlcyDhcpCircuitId The value of msapTlsPlcyDhcpCircuitId specifies whether or not the
circuit-id suboption is present, and if it is present what
information goes in it:
none … | column | Enumeration | .1.3.6.1.4.1.6527.3.1.2.4.3.45.1.12 |
| msapTlsPlcyDhcpRemoteId The value of msapTlsPlcyDhcpRemoteId specifies what information goes into
the remote-id suboption in the DHCP Relay packet.
If the value of this object is set to 'n… | column | Enumeration | .1.3.6.1.4.1.6527.3.1.2.4.3.45.1.13 |
| msapTlsPlcyDhcpRemoteIdString The value of msapTlsPlcyDhcpRemoteIdString specifies the remote-id. The
value of this object is ignored if msapTlsPlcyDhcpRemoteId does not have
the value of 'remote-id'. | column | ALCATEL-ENT1-TIMETRA-TC-MIBTNamedItemOrEmpty | .1.3.6.1.4.1.6527.3.1.2.4.3.45.1.14 |
| msapTlsPlcyDhcpVendorInclOpts The value of msapTlsPlcyDhcpVendorInclOpts specifies what is encoded in the
Alcatel-Lucent vendor specific sub-option of option 82.
The value of this object is only… | column | Bits | .1.3.6.1.4.1.6527.3.1.2.4.3.45.1.15 |
| msapTlsPlcyDhcpVendorOptStr The value of msapTlsPlcyDhcpVendorOptStr specifies the string that goes
into the Alcatel-Lucent vendor specific sub-option of option 82.
This string is only used wh… | column | ALCATEL-ENT1-TIMETRA-TC-MIBTNamedItemOrEmpty | .1.3.6.1.4.1.6527.3.1.2.4.3.45.1.16 |
| msapTlsPlcyEgressMcastGroup The value of msapTlsPlcyEgressMcastGroup specifies the Egress Multicast
Group for the MSAP. | column | ALCATEL-ENT1-TIMETRA-TC-MIBTNamedItemOrEmpty | .1.3.6.1.4.1.6527.3.1.2.4.3.45.1.17 |
| msapTlsPlcyIgmpSnpgImportPlcy The value of msapTlsPlcyIgmpSnpgImportPlcy specifies the policy statement
that is be applied to all incoming IGMP messages on the MSAP. | column | ALCATEL-ENT1-TIMETRA-TC-MIBTPolicyStatementNameOrEmpty | .1.3.6.1.4.1.6527.3.1.2.4.3.45.1.18 |
| msapTlsPlcyIgmpSnpgFastLeave The value of msapTlsPlcyIgmpSnpgFastLeave specifies
whether fast leave is allowed on this MSAP.
If set to 'enabled', the system prunes the port on which an IGMP
'le… | column | ALCATEL-ENT1-TIMETRA-TC-MIBTmnxEnabledDisabled | .1.3.6.1.4.1.6527.3.1.2.4.3.45.1.19 |
| msapTlsPlcySplitHorizonGrp The value of msapTlsPlcySplitHorizonGrp specifies the name of the
split-horizon group for the MSAP.
If the name specified does not correspond to a tlsShgInfoEntry
… | column | ALCATEL-ENT1-TIMETRA-TC-MIBTNamedItemOrEmpty | .1.3.6.1.4.1.6527.3.1.2.4.3.45.1.2 |
| msapTlsPlcyIgmpSnpgSendQueries The value of msapTlsPlcyIgmpSnpgSendQueries specifies
whether the system generates General Queries by itself on
the MSAP. | column | ALCATEL-ENT1-TIMETRA-TC-MIBTmnxEnabledDisabled | .1.3.6.1.4.1.6527.3.1.2.4.3.45.1.20 |
| msapTlsPlcyIgmpSnpgGenQueryIntv The value of msapTlsPlcyIgmpSnpgGenQueryIntv specifies
the interval (in seconds) between two consecutive general queries sent
by the system on the MSAP.
The value o… | column | seconds Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.4.3.45.1.21 |
| msapTlsPlcyIgmpSnpgQueryRespIntv The value of msapTlsPlcyIgmpSnpgQueryRespIntv specifies
the maximum response time (in seconds) advertised in IGMPv2/v3
queries.
The value of this object is only mea… | column | seconds Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.4.3.45.1.22 |
| msapTlsPlcyIgmpSnpgRobustCount The value of msapTlsPlcyIgmpSnpgRobustCount specifies
the robustness variable on the MSAP.
This object allows tuning for the expected packet loss on the MSAP.
If a … | column | Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.4.3.45.1.23 |
| msapTlsPlcyIgmpSnpgLastMembIntvl The value of msapTlsPlcyIgmpSnpgLastMembIntvl specifies the
Max Response Time (in tenths of a second) used in
Group-Specific and Group-Source-Specific Queries sent in response
to… | column | deci-seconds Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.4.3.45.1.24 |
| msapTlsPlcyIgmpSnpgMaxNbrGrps The value of msapTlsPlcyIgmpSnpgMaxNbrGrps specifies how many group
addresses are allowed for the MSAP.
The value 0 means that no limit is imposed. | column | Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.4.3.45.1.25 |
| msapTlsPlcyIgmpSnpgMvrFromVplsId The value of msapTlsPlcyIgmpSnpgMvrFromVplsId specifies from which
VPLS the multicast streams corresponding to the groups learned
via the MSAP are copied.
Groups wh… | column | ALCATEL-ENT1-TIMETRA-TC-MIBTmnxServId | .1.3.6.1.4.1.6527.3.1.2.4.3.45.1.26 |
| msapTlsPlcyIgmpSnpgVersion The value of msapTlsPlcyIgmpSnpgVersion specifies the version
of IGMP running on the MSAP. | column | ALCATEL-ENT1-TIMETRA-TC-MIBTmnxIgmpVersion | .1.3.6.1.4.1.6527.3.1.2.4.3.45.1.27 |
| msapTlsPlcyIgmpSnpgMcacPlcyName The value of msapTlsPlcyIgmpSnpgMcacPlcyName specifies the name
of the multicast CAC (Connection Admission Control) policy. | column | ALCATEL-ENT1-TIMETRA-TC-MIBTPolicyStatementNameOrEmpty | .1.3.6.1.4.1.6527.3.1.2.4.3.45.1.28 |
| msapTlsPlcyIgmpSnpgMcacUncnstBW The value of msapTlsPlcyIgmpSnpgMcacUncnstBW specifies the bandwidth
assigned for interface's multicast CAC policy traffic in kilo-bits per
second(kbps).
If the de… | column | kbps Integer32 | .1.3.6.1.4.1.6527.3.1.2.4.3.45.1.29 |
| msapTlsPlcyArpReplyAgent The value of msapTlsPlcyArpReplyAgent specifies the status of the special
ARP response mechanism in the system for ARP requests destined to
static or dynamic hosts associated wit… | column | Enumeration | .1.3.6.1.4.1.6527.3.1.2.4.3.45.1.3 |
| msapTlsPlcyIgmpSnpgMcacPrRsvMnBW The value of msapTlsPlcyIgmpSnpgMcacPrRsvMnBW specifies the bandwidth
pre-reserved for all the mandatory channels on a given interface
in kilo-bits per second(kbps).
… | column | kbps Integer32 | .1.3.6.1.4.1.6527.3.1.2.4.3.45.1.30 |
| msapTlsPlcySubMgmtMacDaHashing The value of msapTlsPlcySubMgmtMacDaHashing specifies whether
subscriber traffic egressing a LAG MSAP has its egress LAG
link selected by a function of the MAC destination address… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.4.3.45.1.4 |
| msapTlsPlcyDhcpLeasePopulate The value of msapTlsPlcyDhcpLeasePopulate specifies the maximum number of
DHCP lease states allowed on the MSAP. | column | Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.4.3.45.1.5 |
| msapTlsPlcyDhcpPrxyAdminState The value of msapTlsPlcyDhcpPrxyAdminState specifies the desired
administrative state of the proxy server on the interface. | column | ALCATEL-ENT1-TIMETRA-TC-MIBTmnxEnabledDisabled | .1.3.6.1.4.1.6527.3.1.2.4.3.45.1.6 |
| msapTlsPlcyDhcpPrxyServAddrType The value of msapTlsPlcyDhcpPrxyServAddrType specifies the address type
of msapTlsPlcyDhcpPrxyServAddr. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.6527.3.1.2.4.3.45.1.7 |
| msapTlsPlcyDhcpPrxyLeaseTime The value of msapTlsPlcyDhcpPrxyLeaseTime specifies, in seconds, how long
a DHCP client is allowed to use the offered IP address.
A value of 0 means the … | column | seconds Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.4.3.45.1.9 |