tAtmTdpDescrType
ALCATEL-ENT1-TIMETRA-QOS-MIB ·
.1.3.6.1.4.1.6527.3.1.2.16.21.1.1.11
Object
column
r/w
TAtmTdpDescrType
tAtmTdpDescrType identifies the types of ATM traffic descriptor.
The default is determined by the value of tAtmTdpServCat.
The following default rules apply:
Applicable Service Category tAtmTdpDescrType
UBR clp0And1pcr
CBR clp0And1pcr
RT-VBR clp0And1pcrPlusClp0And1scr
NRT-VBR clp0And1pcrPlusClp0And1scr
Context
- MIB
- ALCATEL-ENT1-TIMETRA-QOS-MIB
- OID
.1.3.6.1.4.1.6527.3.1.2.16.21.1.1.11- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- tAtmTdpEntry
- Table
- tAtmTdpTable
- Siblings
- 13
Syntax
TAtmTdpDescrType
- Source
- TAtmTdpDescrType
- Base type
Enumeration
Values & Constraints
Type Values
0 | clp0And1pcr |
1 | clp0And1pcrPlusClp0And1scr |
2 | clp0And1pcrPlusClp0scr |
3 | clp0And1pcrPlusClp0scrTag |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| tAtmTdpIndex This object is used to identify an entity
inside the tAtmTdpTable.
When creating a new row in the table
the value of this index may be obtained
by retrieving the value of tAtmTdpI… | column | Integer32 | .1.3.6.1.4.1.6527.3.1.2.16.21.1.1.1 |
| tAtmTdpRowStatus tAtmTdpRowStatus is used to create/modify/delete a new row in
this table. Only createAndGo/Active/Destroy are supported | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.6527.3.1.2.16.21.1.1.10 |
| tAtmTdpCdvt tAtmTdpCdvt identifies the Cell Delay Variation
Tolerance in microseconds.
The following default applies for Cdvt that is modifiable
depending upon a given service category:
… | column | Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.16.21.1.1.12 |
| tAtmTdpPolicing tAtmTdpPolicing determines whether ingress traffic is policed.
Policing by default is disabled. Policing is valid for CBR, UBR
RT-VBR and NRT-VBR. This is cell-based policing.
… | column | Enumeration | .1.3.6.1.4.1.6527.3.1.2.16.21.1.1.13 |
| tAtmTdpCLPTagging tAtmTdpCLPTagging controls the setting of the CLP bit in the
ATM cell header for egress traffic on an IES or VPRN SAP.
If disabled (the default), all traffic has the CLP bit se… | column | Enumeration | .1.3.6.1.4.1.6527.3.1.2.16.21.1.1.14 |
| tAtmTdpSir tAtmTdpSir identifies the sustained information rate
in kilobits per second.
The default Sir is determined by the Service Category.
The following default applies to Sir that is mo… | column | Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.16.21.1.1.2 |
| tAtmTdpPir tAtmTdpPir identifies the peak information rate
in kilobits per second.
The default Pir is determined by the Service Category.
The following default applies to Pir that is modifia… | column | Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.16.21.1.1.3 |
| tAtmTdpMbs tAtmTdpMbs identifies the maximum burst size
in cells.
The default Mbs is determined by the Service Category.
The following default applies to Mbs that is modifiable
depending upo… | column | Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.16.21.1.1.4 |
| tAtmTdpMir tAtmTdpMir identifies the Minimum Information Rate
in kilobits per second.
The default Mir is determined by the Service Category.
The following default applies for Mir that is mod… | column | Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.16.21.1.1.5 |
| tAtmTdpShaping tAtmTdpShaping determines whether egress shaping should occur.
The default tAtmTdpShaping is determined by the Service Category.
The following default applies for tAtmTdpShaping
d… | column | Enumeration | .1.3.6.1.4.1.6527.3.1.2.16.21.1.1.6 |
| tAtmTdpServCat tAtmTdpServCat determines the ATM service category. | column | ATM-TC-MIBAtmServiceCategory | .1.3.6.1.4.1.6527.3.1.2.16.21.1.1.7 |
| tAtmTdpDescription The value of tAtmTdpDescription specifies an ASCII string used
to describe the ATM traffic descriptor. | column | ALCATEL-ENT1-TIMETRA-TC-MIBTItemDescription | .1.3.6.1.4.1.6527.3.1.2.16.21.1.1.8 |
| tAtmTdpLastChanged tAtmTdpLastChanged maintains the timestamp of the last change
made to a row in the Traffic Descriptor Profile Table. | column | SNMPv2-TCTimeStamp | .1.3.6.1.4.1.6527.3.1.2.16.21.1.1.9 |