tmnxOamPingResultsMtuResponseSize
ALCATEL-ENT1-TIMETRA-OAM-TEST-MIB ·
.1.3.6.1.4.1.6527.3.1.2.11.1.4.1.8
Object
This object contains the largest size OAM Echo request message that received a valid reply. The value of this object MUST be reported as 0 when no ping responses have been received or an active test has not yet timed out. When tmnxOamPingCtlTestMode does not have a value of 'mtuPing', this object is not relevant and should contain a value of 0.
Context
- MIB
- ALCATEL-ENT1-TIMETRA-OAM-TEST-MIB
- OID
.1.3.6.1.4.1.6527.3.1.2.11.1.4.1.8- Type
- column
- Access
- readonly
- Status
- current
- Units
- Octets
- Parent
- tmnxOamPingResultsEntry
- Table
- tmnxOamPingResultsTable
- Siblings
- 24
Syntax
Octets SNMPv2-SMIUnsigned32
- Source
- SNMPv2-SMIUnsigned32
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| tmnxOamPingResultsOperStatus Reflects the operational state of a tmnxOamPingCtlEntry:
enabled(1) - Test is active.
disabled(2) - Test has stopped. | column | Enumeration | .1.3.6.1.4.1.6527.3.1.2.11.1.4.1.1 |
| tmnxOamPingResultsProbeResponses Number of responses received for the corresponding
tmnxOamPingCtlEntry and tmnxOamPingResultsEntry. The value of
this object MUST be reported as 0 when no probe responses have
… | column | responses SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6527.3.1.2.11.1.4.1.10 |
| tmnxOamPingResultsSentProbes The value of this object reflects the number of probes sent
for the corresponding tmnxOamPingCtlEntry and tmnxOamPingResultsEntry.
The value of this object MUST be reported as 0 w… | column | probes SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6527.3.1.2.11.1.4.1.11 |
| tmnxOamPingResultsLastGoodProbe Date and time when the last response was received for
an OAM probe. | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.6527.3.1.2.11.1.4.1.12 |
| tmnxOamPingResultsLastRespHeader A copy of the OAM header of the last response packet received for
this OAM ping test. The value of this object MUST be reported
as 0 when no probes have been sent. | column | OctetString | .1.3.6.1.4.1.6527.3.1.2.11.1.4.1.13 |
| tmnxOamPingResultsMinTt The minimum OAM ping outbound one-way-trip-time received.
A value of 0 for this object implies that no one-way-trip-time
measurement is available. | column | milliseconds SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6527.3.1.2.11.1.4.1.14 |
| tmnxOamPingResultsMaxTt The maximum OAM ping outbound one-way-trip-time received.
A value of 0 for this object implies that no one-way-trip-time
measurement is available. | column | milliseconds SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6527.3.1.2.11.1.4.1.15 |
| tmnxOamPingResultsAverageTt The current average OAM ping outbound one-way-trip-time.
A value of 0 for this object implies that no one-way-trip-time
measurement is available. | column | milliseconds SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6527.3.1.2.11.1.4.1.16 |
| tmnxOamPingResultsTtSumOfSquares This object contains the sum of the squares for the outbound
one-way-trip time of all ping responses received. Its purpose
is to enable standard deviation calculation.
A value… | column | milliseconds SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6527.3.1.2.11.1.4.1.17 |
| tmnxOamPingResultsMinInTt The minimum OAM ping inbound one-way-trip-time received.
A value of 0 for this object implies that no one-way-trip-time
measurement is available. | column | milliseconds SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6527.3.1.2.11.1.4.1.18 |
| tmnxOamPingResultsMaxInTt The maximum OAM ping inbound one-way-trip-time received.
A value of 0 for this object implies that no one-way-trip-time
measurement is available. | column | milliseconds SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6527.3.1.2.11.1.4.1.19 |
| tmnxOamPingResultsAverageInTt The current average OAM ping inbound one-way-trip-time.
A value of 0 for this object implies that no one-way-trip-time
measurement is available. | column | milliseconds SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6527.3.1.2.11.1.4.1.20 |
| tmnxOamPingResultsInTtSumOfSqrs This object contains the sum of the squares for the inbound
one-way-trip time of all ping responses received. Its purpose
is to enable standard deviation calculation.
A value … | column | milliseconds SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6527.3.1.2.11.1.4.1.21 |
| tmnxOamPingResultsOutJitter The value of tmnxOamPingResultsOutJitter indicates the
amount of one-way trip jitter, expressed in milliseconds, for a
ping probe request packet sent for this OAM test.
A value of… | column | milliseconds SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6527.3.1.2.11.1.4.1.22 |
| tmnxOamPingResultsInJitter The value of tmnxOamPingResultsInJitter indicates the
amount of one-way-trip jitter, expressed in milliseconds, for a
ping probe response packet received for this OAM test.
A valu… | column | milliseconds SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6527.3.1.2.11.1.4.1.23 |
| tmnxOamPingResultsRtJitter The value of tmnxOamPingResultsRtJitter indicates the
amount of two-way trip jitter, expressed in milliseconds, for a
ping probe sent for this OAM test.
A value of 0 for this obje… | column | milliseconds SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6527.3.1.2.11.1.4.1.24 |
| tmnxOamPingResultsProbeTimeouts The value of tmnxOamPingResultsProbeTimeouts indicates the number
of probes timed out without receiving a response. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6527.3.1.2.11.1.4.1.25 |
| tmnxOamPingResultsProbeFailures The value of tmnxOamPingResultsProbeFailures indicates the total
number of probes that failed to be transmitted plus the number of
probes that timed out without receiving a respon… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6527.3.1.2.11.1.4.1.26 |
| tmnxOamPingResultsTestRunIndex The value of tmnxOamPingResultsTestRunIndex identifies the
row entry that reports results for a single OAM test run.
The agent starts assigning tmnxOamPingResultsTe… | column | Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.11.1.4.1.27 |
| tmnxOamPingResultsMinRtt The minimum OAM ping round-trip-time (RTT) received.
A value of 0 for this object implies that no RTT has been received.
When tmnxOamPingCtlTestMode does not have… | column | milliseconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6527.3.1.2.11.1.4.1.4 |
| tmnxOamPingResultsMaxRtt The maximum OAM ping round-trip-time (RTT) received.
A value of 0 for this object implies that no RTT has been received.
When tmnxOamPingCtlTestMode does not have… | column | milliseconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6527.3.1.2.11.1.4.1.5 |
| tmnxOamPingResultsAverageRtt The current average OAM ping round-trip-time (RTT).
When tmnxOamPingCtlTestMode does not have a value of 'sdpPing', this
object is not relevant and should contain a value of 0. | column | milliseconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6527.3.1.2.11.1.4.1.6 |
| tmnxOamPingResultsRttSumOfSquares This object contains the sum of the squares for all ping
responses received. Its purpose is to enable standard
deviation calculation.
The value of this object MU… | column | milliseconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6527.3.1.2.11.1.4.1.7 |
| tmnxOamPingResultsSvcPing The object contains the final results of an OAM 'svcPing' test.
The value of this object MUST be reported as 0 when no ping responses
have been received or an active test has not… | column | Enumeration | .1.3.6.1.4.1.6527.3.1.2.11.1.4.1.9 |