vRtrMplsLspPathRecordLabel
ALCATEL-ENT1-TIMETRA-MPLS-MIB ·
.1.3.6.1.4.1.6527.3.1.2.6.4.1.36
Object
column
r/w
Enumeration
When the value of vRtrMplsLspPathRecordLabel is 'record',
recording of labels at each node that a LSP traverses is
enabled.
When the value of vRtrMplsLspPathRecordLabel is 'noRecord',
recording of labels at each node that a LSP traverses is
disabled.
Context
- MIB
- ALCATEL-ENT1-TIMETRA-MPLS-MIB
- OID
.1.3.6.1.4.1.6527.3.1.2.6.4.1.36- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- vRtrMplsLspPathEntry
- Table
- vRtrMplsLspPathTable
- Siblings
- 35
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | record |
2 | noRecord |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| vRtrMplsLspPathRowStatus The row status used for creation, deletion, or control
of vRtrMplsLspPathTable entries. Before the row can be
placed into the 'active' state vRtrMplsLspPathType must
have been as… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.6527.3.1.2.6.4.1.1 |
| vRtrMplsLspPathCosSource When vRtrMplsLspPathCosSource is set to 'true', the value of
vRtrMplsLspPathClassOfService overrides vRtrMplsLspClassOfService.
When 'false', the value of vRtrMplsLspClassOfServic… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.6.4.1.10 |
| vRtrMplsLspPathClassOfService The name of the class of service value to be assigned to all
packets on the LSP is specified with vRtrMplsLspPathClassOfService.
The EXP bits in the MPLS header are set based on t… | column | ALCATEL-ENT1-TIMETRA-TC-MIBTNamedItemOrEmpty | .1.3.6.1.4.1.6527.3.1.2.6.4.1.11 |
| vRtrMplsLspPathSetupPriority The value of vRtrMplsLspPathSetupPriority specifies the setup
priority to use when insufficient bandwidth is available to setup
a LSP. The setup priority is compared against th… | column | Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.6.4.1.12 |
| vRtrMplsLspPathHoldPriority The value of vRtrMplsLspPathHoldPriority specifies the hold
priority to use when insufficient bandwidth is available to setup
a LSP. The setup priority is compared against the … | column | Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.6.4.1.13 |
| vRtrMplsLspPathRecord When the value of vRtrMplsLspPathRecord is 'record', recording of
all the hops that a LSP traverses is enabled.
When the value of vRtrMplsLspPathRecord is 'noRecor… | column | Enumeration | .1.3.6.1.4.1.6527.3.1.2.6.4.1.14 |
| vRtrMplsLspPathHopLimit The value of vRtrMplsLspPathHopLimit specifies the maximum number
of hops that a LSP will traverse including the ingress and
egress ESRs. A LSP will not be setup if the hop limit… | column | Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.6.4.1.15 |
| vRtrMplsLspPathSharing When vRtrMplsLspPathSharing has a value of 'true', path-sharing
is enabled for the secondary path. Path-sharing is used to
control the hops of the secondary path.
… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.6.4.1.16 |
| vRtrMplsLspPathAdminState The desired administrative state for this LSP path. | column | ALCATEL-ENT1-TIMETRA-TC-MIBTmnxAdminState | .1.3.6.1.4.1.6527.3.1.2.6.4.1.17 |
| vRtrMplsLspPathOperState The current operational state of this LSP path. | column | ALCATEL-ENT1-TIMETRA-TC-MIBTmnxOperState | .1.3.6.1.4.1.6527.3.1.2.6.4.1.18 |
| vRtrMplsLspPathInheritance For each writable object in this row that can be configured to
inherit its value from its corresponding object in the
vRtrMplsLspTable, controls whether to inherit the operationa… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6527.3.1.2.6.4.1.19 |
| vRtrMplsLspPathLastChange The sysUpTime when this row was last modified. | column | SNMPv2-TCTimeStamp | .1.3.6.1.4.1.6527.3.1.2.6.4.1.2 |
| vRtrMplsLspPathLspId This value identifies the label switched path that
is signaled for this entry. | column | MPLS-LSR-MIBMplsLSPID | .1.3.6.1.4.1.6527.3.1.2.6.4.1.20 |
| vRtrMplsLspPathRetryTimeRemaining The time in 10-millisecond units to signal this path. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6527.3.1.2.6.4.1.21 |
| vRtrMplsLspPathTunnelARHopListIndex Primary index into the mplsTunnelARHopTable identifying a
particular recorded hop list. A value of 0 implies that there
is no recored hop list associated with this LSP path. | column | Integer32 | .1.3.6.1.4.1.6527.3.1.2.6.4.1.22 |
| vRtrMplsLspPathNegotiatedMTU The value of vRtrMplsLspPathNegotiatedMTU specifies the size
for the Maximum transmission unit (MTU) that is negotiated
during establishment of this LSP Path. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6527.3.1.2.6.4.1.23 |
| vRtrMplsLspPathFailCode The value of vRtrMplsLspPathFailCode specifies the reason code
for LSP Path failure. A value of 0 indicates that no failure
has occurred. | column | TmnxMplsLspFailCode | .1.3.6.1.4.1.6527.3.1.2.6.4.1.24 |
| vRtrMplsLspPathFailNodeAddr The value of vRtrMplsLspPathFailNodeAddr specifies the IP address
of the node in the LSP path at which the LSP path failed. When
no failure has occurred, this value is 0. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.6527.3.1.2.6.4.1.25 |
| vRtrMplsLspPathAdminGroupInclude The value of vRtrMplsLspPathAdminGroupInclude is a bit-map that
specifies a list of admin groups that should be included when
this LSP path is setup. If bit 'n' is set, then the a… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6527.3.1.2.6.4.1.26 |
| vRtrMplsLspPathAdminGroupExclude The value of vRtrMplsLspPathAdminGroupExclude is a bit-map that
specifies a list of admin groups that should be excluded when
this LSP path is setup. If bit 'n' is set, then the a… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6527.3.1.2.6.4.1.27 |
| vRtrMplsLspPathAdaptive Setting the value of vRtrMplsLspPathAdaptive to 'true', enables
make-before-break functionality for the LSP path.
Setting the value to 'false', disables m… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.6.4.1.28 |
| vRtrMplsLspPathOptimizeTimer The value of vRtrMplsLspPathOptimizeTimer specifies the time, in
seconds, the software will wait before attempting to re-optimize
the LSP path.
When CSPF is enable… | column | seconds Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.6.4.1.29 |
| vRtrMplsLspPathType This variable is an enum that represents the role this
path is taking within this LSP. | column | Enumeration | .1.3.6.1.4.1.6527.3.1.2.6.4.1.3 |
| vRtrMplsLspPathNextOptimize The value of vRtrMplsLspPathNextOptimize specifies the current value
of the optimize timer. This is the time, in seconds, remaining till
the optimize timer will expire and optimiz… | column | seconds Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.6.4.1.30 |
| vRtrMplsLspPathOperBandwidth The value of vRtrMplsLspPathOperBandwidth specifies the amount of
bandwidth in mega-bits per seconds (Mbps) that has been reserved
for the operational LSP path.
Whe… | column | mega-bits per second SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6527.3.1.2.6.4.1.31 |
| vRtrMplsLspPathMBBState The value of vRtrMplsLspPathMBBState specifies the state of the
most recent invocation of the make-before-break functionality.
Possible states are:
… | column | Enumeration | .1.3.6.1.4.1.6527.3.1.2.6.4.1.32 |
| vRtrMplsLspPathResignal Setting the value of vRtrMplsLspPathResignal to 'doAction' triggers
the re-signaling of the LSP path.
If the LSP path is operationally down either due to network f… | column | ALCATEL-ENT1-TIMETRA-TC-MIBTmnxActionType | .1.3.6.1.4.1.6527.3.1.2.6.4.1.33 |
| vRtrMplsLspPathTunnelCRHopListIndex Primary index into the vRtrMplsTunnelCHopTable identifying a
particular computed hop list. A value of 0 implies that there
is no computed hop list associated with this LSP path. | column | Integer32 | .1.3.6.1.4.1.6527.3.1.2.6.4.1.34 |
| vRtrMplsLspPathOperMTU The value of vRtrMplsLspPathOperMTU specifies the size
for the Maximum transmission unit (MTU) that is currently
operation for this LSP Path. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6527.3.1.2.6.4.1.35 |
| vRtrMplsLspPathCos The configured Class Of Service (COS) for this path. If
the value is between 0 and 7 inclusive, this value
will be inserted in the 3 bit COS field in the label.
If the value is 2… | column | Integer32 | .1.3.6.1.4.1.6527.3.1.2.6.4.1.4 |
| vRtrMplsLspPathProperties The set of configured properties for this path expressed
as a bit map. For example, if the path is an adaptive
path, the bit corresponding to bit value 1 is set. | column | Bits | .1.3.6.1.4.1.6527.3.1.2.6.4.1.5 |
| vRtrMplsLspPathBandwidth The value of vRtrMplsLspPathBandwidth specifies the amount
of bandwidth in mega-bits per seconds (Mbps) to be reserved
for this LSP path. A value of zero (0) indicates that no
ba… | column | mega-bits per second SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6527.3.1.2.6.4.1.6 |
| vRtrMplsLspPathBwProtect When vRtrMplsLspPathBwProtect has a value of 'true', bandwidth
protection is enabled on a LSP. LSPs that reserve bandwidth
will be used for EF services where customers need guara… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.6.4.1.7 |
| vRtrMplsLspPathState The current working state of this path within this LSP. | column | Enumeration | .1.3.6.1.4.1.6527.3.1.2.6.4.1.8 |
| vRtrMplsLspPathPreference When there is no path in the LSP with vRtrMplsLspPathType
value of 'primary', 'secondary' type paths of this LSP
with the same value of vRtrMplsLspPathPreference are used
for loa… | column | Integer32 | .1.3.6.1.4.1.6527.3.1.2.6.4.1.9 |