vRtrMplsGeneralNewLspIndex

ALCATEL-ENT1-TIMETRA-MPLS-MIB · .1.3.6.1.4.1.6527.3.1.2.6.7.1.6

MIB view Table view

Object

column r/w SNMPv2-TCTestAndIncr

This object is used to assign values to vRtrMplsLspIndex as
described in 'Textual Conventions for SNMPv2'.  The network
manager reads the object, and then writes the value back
in the SET request that creates a new instance of 
vRtrMplsLspEntry.  If the SET fails with the code 
'inconsistentValue', then the process must be repeated.  
If the the SET succeeds, then the object is incremented 
and the new instance is created according to the manager's 
directions.

Context

MIB: ALCATEL-ENT1-TIMETRA-MPLS-MIB
OID: .1.3.6.1.4.1.6527.3.1.2.6.7.1.6
Type: column
Access: readwrite
Status: current
Parent: vRtrMplsGeneralEntry
Table: vRtrMplsGeneralTable
Siblings: 14

Syntax

SNMPv2-TCTestAndIncr

Source: SNMPv2-TCTestAndIncr
Base type: Integer32

Values & Constraints

Type Constraints

range: 0..2147483647

Related Objects

Sibling Objects

Object	Type	Syntax	OID
vRtrMplsGeneralLastChange The sysUpTime when this row was last modified.	column	SNMPv2-TCTimeStamp	`.1.3.6.1.4.1.6527.3.1.2.6.7.1.1`
vRtrMplsGeneralHoldTimer The value of vRtrMplsGeneralHoldTimer specifies the time, in seconds, for which the ingress node holds a bit before programming its data plane and declaring the lsp up to the s…	column	seconds Unsigned32	`.1.3.6.1.4.1.6527.3.1.2.6.7.1.10`
vRtrMplsGeneralDynamicBypass The value of vRtrMplsGeneralDynamicBypass specifies whether dynamic bypass tunnels are enabled. By default, dynamic bypass tunnels are enabled.	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.6527.3.1.2.6.7.1.11`
vRtrMplsGeneralNextResignal The value of vRtrMplsGeneralNextResignal indicates the time remaining, in minutes, for the vRtrMplsGeneralResignalTimer to expire.	column	SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.6527.3.1.2.6.7.1.12`
vRtrMplsGeneralOperDownReason The value of vRtrMplsGeneralOperDownReason indicates the reason due to which the MPLS instance is operationally down.	column	TmnxMplsOperDownReasonCode	`.1.3.6.1.4.1.6527.3.1.2.6.7.1.13`
vRtrMplsGeneralSrlgFrr The value of vRtrMplsGeneralSrlgFrr specifies whether Shared Risk Link Group (SRLG) constraint will be used in the computation of FRR bypass or detour to be associated with any p…	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.6527.3.1.2.6.7.1.14`
vRtrMplsGeneralSrlgFrrStrict The value of vRtrMplsGeneralSrlgFrrStrict specifies whether to associate the LSP with a bypass or signal a detour if a bypass or detour satisfies all other constraints except th…	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.6527.3.1.2.6.7.1.15`
vRtrMplsGeneralAdminState When vRtrMplsGeneralAdminState is set to 'inService', the agent attempts to enable the MPLS protocol instance on this router. When vRtrMplsGeneralAdminState is set …	column	ALCATEL-ENT1-TIMETRA-TC-MIBTmnxAdminState	`.1.3.6.1.4.1.6527.3.1.2.6.7.1.2`
vRtrMplsGeneralOperState vRtrMplsGeneralOperState indicates the current operating state of this MPLS protocol instance on this router.	column	ALCATEL-ENT1-TIMETRA-TC-MIBTmnxOperState	`.1.3.6.1.4.1.6527.3.1.2.6.7.1.3`
vRtrMplsGeneralPropagateTtl When vRtrMplsGeneralPropagateTtl is set to 'true', for all LSPs, the ingress ESR writes the TTL of the IP packet in the label and each transit ESR decrements the TTL in the label…	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.6527.3.1.2.6.7.1.4`
vRtrMplsGeneralTE The value of vRtrMplsGeneralTE specifies the type of traffic engineering used with this MPLS instance.	column	Enumeration	`.1.3.6.1.4.1.6527.3.1.2.6.7.1.5`
vRtrMplsGeneralOptimizeTimer The value of vRtrMplsGeneralOptimizeTimer specifies the time, in seconds, the software will wait before attempting to re-optimize the LSPs. When CSPF is enabled, c…	column	seconds Unsigned32	`.1.3.6.1.4.1.6527.3.1.2.6.7.1.7`
vRtrMplsGeneralFRObject The value of vRtrMplsGeneralFRObject specifies whether fast reroute, for LSPs using 'Facility Backup', is signalled with or without the fast reroute object. The value of vRtrMpls…	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.6527.3.1.2.6.7.1.8`
vRtrMplsGeneralResignalTimer The value of vRtrMplsGeneralResignalTimer specifies the value for the LSP resignal timer, that is the time, in minutes, the software will wait before attempting to resignal the …	column	minutes Unsigned32	`.1.3.6.1.4.1.6527.3.1.2.6.7.1.9`