vRtrMplsGeneralAdminState
ALCATEL-ENT1-TIMETRA-MPLS-MIB ·
.1.3.6.1.4.1.6527.3.1.2.6.7.1.2
Object
When vRtrMplsGeneralAdminState is set to 'inService', the agent
attempts to enable the MPLS protocol instance on this router.
When vRtrMplsGeneralAdminState is set to 'outOfService', the
agent attempts to disable the MPLS protocol instance on this
router.
Context
- MIB
- ALCATEL-ENT1-TIMETRA-MPLS-MIB
- OID
.1.3.6.1.4.1.6527.3.1.2.6.7.1.2- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- vRtrMplsGeneralEntry
- Table
- vRtrMplsGeneralTable
- Siblings
- 14
Syntax
ALCATEL-ENT1-TIMETRA-TC-MIBTmnxAdminState
- Source
- ALCATEL-ENT1-TIMETRA-TC-MIBTmnxAdminState
- Base type
Enumeration
Values & Constraints
Type Values
1 | noop |
2 | inService |
3 | outOfService |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| vRtrMplsGeneralLastChange The sysUpTime when this row was last modified. | column | SNMPv2-TCTimeStamp | .1.3.6.1.4.1.6527.3.1.2.6.7.1.1 |
| vRtrMplsGeneralHoldTimer The value of vRtrMplsGeneralHoldTimer specifies the time, in
seconds, for which the ingress node holds a bit before
programming its data plane and declaring the lsp up to
the s… | column | seconds Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.6.7.1.10 |
| vRtrMplsGeneralDynamicBypass The value of vRtrMplsGeneralDynamicBypass specifies whether
dynamic bypass tunnels are enabled.
By default, dynamic bypass tunnels are enabled. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.6.7.1.11 |
| vRtrMplsGeneralNextResignal The value of vRtrMplsGeneralNextResignal indicates the time
remaining, in minutes, for the vRtrMplsGeneralResignalTimer to expire. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6527.3.1.2.6.7.1.12 |
| vRtrMplsGeneralOperDownReason The value of vRtrMplsGeneralOperDownReason indicates the reason
due to which the MPLS instance is operationally down. | column | TmnxMplsOperDownReasonCode | .1.3.6.1.4.1.6527.3.1.2.6.7.1.13 |
| vRtrMplsGeneralSrlgFrr The value of vRtrMplsGeneralSrlgFrr specifies whether Shared Risk
Link Group (SRLG) constraint will be used in the computation of
FRR bypass or detour to be associated with any p… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.6.7.1.14 |
| vRtrMplsGeneralSrlgFrrStrict The value of vRtrMplsGeneralSrlgFrrStrict specifies whether
to associate the LSP with a bypass or signal a detour if a
bypass or detour satisfies all other constraints except th… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.6.7.1.15 |
| vRtrMplsGeneralOperState vRtrMplsGeneralOperState indicates the current operating state
of this MPLS protocol instance on this router. | column | ALCATEL-ENT1-TIMETRA-TC-MIBTmnxOperState | .1.3.6.1.4.1.6527.3.1.2.6.7.1.3 |
| vRtrMplsGeneralPropagateTtl When vRtrMplsGeneralPropagateTtl is set to 'true', for all LSPs,
the ingress ESR writes the TTL of the IP packet in the label and
each transit ESR decrements the TTL in the label… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.6.7.1.4 |
| vRtrMplsGeneralTE The value of vRtrMplsGeneralTE specifies the type of traffic
engineering used with this MPLS instance. | column | Enumeration | .1.3.6.1.4.1.6527.3.1.2.6.7.1.5 |
| vRtrMplsGeneralNewLspIndex This object is used to assign values to vRtrMplsLspIndex as
described in 'Textual Conventions for SNMPv2'. The network
manager reads the object, and then writes the value back
in… | column | SNMPv2-TCTestAndIncr | .1.3.6.1.4.1.6527.3.1.2.6.7.1.6 |
| vRtrMplsGeneralOptimizeTimer The value of vRtrMplsGeneralOptimizeTimer specifies the time, in
seconds, the software will wait before attempting to re-optimize
the LSPs.
When CSPF is enabled, c… | column | seconds Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.6.7.1.7 |
| vRtrMplsGeneralFRObject The value of vRtrMplsGeneralFRObject specifies whether fast reroute,
for LSPs using 'Facility Backup', is signalled with or without the
fast reroute object. The value of vRtrMpls… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.6.7.1.8 |
| vRtrMplsGeneralResignalTimer The value of vRtrMplsGeneralResignalTimer specifies the value
for the LSP resignal timer, that is the time, in minutes, the
software will wait before attempting to resignal the … | column | minutes Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.6.7.1.9 |