vRtrLdpIfRowStatus
ALCATEL-ENT1-TIMETRA-LDP-MIB ·
.1.3.6.1.4.1.6527.3.1.2.8.5.1.3
Object
vRtrLdpIfRowStatus is used to control the creation and deletion
of rows in the vRtrLdpIfTable.
A row can be created by setting vRtrLdpIfRowStatus to 'createAndGo'.
The agent should assign the default attribute values and change
the row status to 'active'.
A row entry can be destroyed by setting vRtrLdpIfRowStatus to
'destroy'. An attempt to destroy a row will fail if
vRtrLdpIfAdminState is not set to 'outOfService'.
Context
- MIB
- ALCATEL-ENT1-TIMETRA-LDP-MIB
- OID
.1.3.6.1.4.1.6527.3.1.2.8.5.1.3- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- vRtrLdpIfEntry
- Table
- vRtrLdpIfTable
- Siblings
- 17
Values & Constraints
Type Values
1 | active |
2 | notInService |
3 | notReady |
4 | createAndGo |
5 | createAndWait |
6 | destroy |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| vRtrLdpIfIndex vRtrLdpIfIndex is an index for the row entry and is used
mutually exclusively with the vRtrLdpPeerAddress field. If
the vRtrLdpPeerAddress field is 0.0.0.0, then vRtrLdpIfIndex
… | column | IF-MIBInterfaceIndexOrZero | .1.3.6.1.4.1.6527.3.1.2.8.5.1.1 |
| vRtrLdpIfHelloFactor The value of vRtrLdpIfHelloFactor specifies the value by which
the hello timeout (vRtrLdpIfHelloTimeout) should be divided to
give the hello time i.e. the time interval, in secon… | column | seconds TmnxLdpHelloFactor | .1.3.6.1.4.1.6527.3.1.2.8.5.1.10 |
| vRtrLdpIfHelloTimeout The value of vRtrLdpIfHelloTimeout specifies the hello time also
known as hold time. It is the time interval, in seconds, that
LDP waits before declaring a neighbor to be down. He… | column | seconds TmnxLdpHelloTimeout | .1.3.6.1.4.1.6527.3.1.2.8.5.1.11 |
| vRtrLdpIfBackoffTime The value of vRtrLdpIfBackoffTime specifies the initial value
for the backoff interval.
The backoff interval is the time, in seconds, that LDP waits
after an LDP … | column | seconds Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.8.5.1.12 |
| vRtrLdpIfMaxBackoffTime The value of vRtrLdpIfMaxBackoffTime specifies the maximum
value for the backoff interval.
For each successive failure of the LDP session startup, the
backoff inte… | column | seconds TmnxLdpBackoffTime | .1.3.6.1.4.1.6527.3.1.2.8.5.1.13 |
| vRtrLdpIfTransportAddrType The value of vRtrLdpIfTransportAddrType specifies the source
of the transport address to be used when setting up the LDP TCP
sessions. This value is meaningful only in case of LDP… | column | Enumeration | .1.3.6.1.4.1.6527.3.1.2.8.5.1.14 |
| vRtrLdpIfPassiveMode The value of vRtrLdpIfPassiveMode specifies the mode used for
setting up LDP sessions. This object is meaningful only in case
of LDP targeted peers and not for interfaces. When i… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.8.5.1.15 |
| vRtrLdpIfAutoCreate The value of vRtrLdpIfAutoCreate specifies whether or not the
row entry represents a targeted peer that was automatically
created through Service Manager. For an LDP interface, t… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.8.5.1.16 |
| vRtrLdpIfOperDownReason The value of vRtrLdpIfOperDownReason specifies the reason
that the LDP interface or targeted peer is operationally
down. | column | TmnxLdpIntTargOperDownReasonCode | .1.3.6.1.4.1.6527.3.1.2.8.5.1.17 |
| vRtrLdpIfTunneling The value of vRtrLdpIfTunneling specifies whether tunneling
of LDP over tunnels is enabled. When this object has a value of
'true', tunneling is enabled. When its value is 'fals… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.8.5.1.18 |
| vRtrLdpPeerAddress vRtrLdpPeerAddress is an index for the row entry and is used
mutually exclusively with the vRtrLdpIfIndex field. If the
vRtrLdpIfIndex field is 0, then the vRtrLdpPeerAddress is… | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.6527.3.1.2.8.5.1.2 |
| vRtrLdpIfLastChange The value of vRtrLdpIfLastChange specifies the sysUpTime when this
row was last modified. | column | SNMPv2-TCTimeStamp | .1.3.6.1.4.1.6527.3.1.2.8.5.1.4 |
| vRtrLdpIfAdminState The value of vRtrLdpIfAdminState indicates the desired administrative
state for LDP on this interface or targeted peer. | column | ALCATEL-ENT1-TIMETRA-TC-MIBTmnxAdminState | .1.3.6.1.4.1.6527.3.1.2.8.5.1.5 |
| vRtrLdpIfOperState The value of vRtrLdpIfOperState specifies the current operational
state of LDP on this interface or targeted peer. | column | ALCATEL-ENT1-TIMETRA-TC-MIBTmnxOperState | .1.3.6.1.4.1.6527.3.1.2.8.5.1.6 |
| vRtrLdpIfInheritance Some writable object in this row that can be configured to
inherit its value from its corresponding object in the
vRtrLdpGeneralTable for LDP interfaces or from the corresponding… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6527.3.1.2.8.5.1.7 |
| vRtrLdpIfKeepAliveFactor The value of vRtrLdpIfKeepAliveFactor specifies the value by which
the keepalive timeout (vRtrLdpIfKeepAliveTimeout) should be divided
to give the keepalive time i.e. the time in… | column | TmnxLdpKeepAliveFactor | .1.3.6.1.4.1.6527.3.1.2.8.5.1.8 |
| vRtrLdpIfKeepAliveTimeout The value of vRtrLdpIfKeepAliveTimeout specifies the time interval,
in seconds, that LDP waits before tearing down a session. If no LDP
messages are exchanged during this time int… | column | seconds TmnxLdpKeepAliveTimeout | .1.3.6.1.4.1.6527.3.1.2.8.5.1.9 |