alaSdpId
ALCATEL-ENT1-SERVICE-MGR-MIB ·
.1.3.6.1.4.1.6486.801.1.2.1.51.1.1.1.6.1.1
Object
column
AluSdpId
SDP identifier.
Context
- MIB
- ALCATEL-ENT1-SERVICE-MGR-MIB
- OID
.1.3.6.1.4.1.6486.801.1.2.1.51.1.1.1.6.1.1- Type
- column
- Access
- noaccess
- Status
- current
- Parent
- alaSdpInfoEntry
- Table
- alaSdpInfoTable
- Siblings
- 28
Syntax
AluSdpId
- Source
- AluSdpId
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..65535
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| alaSdpAdminPathMtu This object specifies the desired largest service
frame size (in octets) that can be transmitted
through this SDP to the far-end ESR, without
requiring the packet to be fragmented… | column | Integer32 | .1.3.6.1.4.1.6486.801.1.2.1.51.1.1.1.6.1.10 |
| alaSdpOperPathMtu This object specifies the actual largest service
frame size (in octets) that can be transmitted
through this SDP to the far-end ESR, without
requiring the packet to be fragmented.… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6486.801.1.2.1.51.1.1.1.6.1.11 |
| alaSdpLastMgmtChange The value of sysUpTime at the time of the
most recent management-initiated change to
this SDP. | column | AluDateAndTime | .1.3.6.1.4.1.6486.801.1.2.1.51.1.1.1.6.1.12 |
| alaSdpLdpEnabled When the value of this object is 'true'
the transport LSP's are signalled by LDP,
as opposed to being provisioned static or
RSVP-signalled LSP's. This object applies
only to MPLS … | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6486.801.1.2.1.51.1.1.1.6.1.13 |
| alaSdpVlanVcEtype This object specifies the Ethertype used in
frames sent out this SDP, when the VC type
is vlan. | column | Unsigned32 | .1.3.6.1.4.1.6486.801.1.2.1.51.1.1.1.6.1.14 |
| alaSdpAdvertisedVllMtuOverride When the value of this object is 'true'
the advertised MTU of a VLL spoke SDP bind
includes the 14-byte L2 header, so that it is
backward compatible with pre-2.0 software. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6486.801.1.2.1.51.1.1.1.6.1.15 |
| alaSdpOperFlags This object specifies all the conditions that
affect the operating status of this SDP. | column | Bits | .1.3.6.1.4.1.6486.801.1.2.1.51.1.1.1.6.1.16 |
| alaSdpLastStatusChange The value of sysUpTime at the time of the
most recent operating status change to this
SDP. | column | AluDateAndTime | .1.3.6.1.4.1.6486.801.1.2.1.51.1.1.1.6.1.17 |
| alaSdpNetworkPort The ifIndex of the network port where isis discovered the
neighbor node information (BVlan and BMac). | column | IF-MIBInterfaceIndexOrZero | .1.3.6.1.4.1.6486.801.1.2.1.51.1.1.1.6.1.18 |
| alaSdpBVlan The Backbone Vlan Id (BVlan) where isis has discovered the
neighbor node information (BVlan and BMac). | column | Integer32 | .1.3.6.1.4.1.6486.801.1.2.1.51.1.1.1.6.1.19 |
| alaSdpRowStatus This object indicates the status of this row. The
only values supported during a set operation are
'createAndGo' and 'destroy'. To delete an entry
from this table, the correspondi… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.6486.801.1.2.1.51.1.1.1.6.1.2 |
| alaSdpSystemId The Backbone MAC (B-MAC) where isis has discovered the
neighbor node information (BVlan and BMac). | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.6486.801.1.2.1.51.1.1.1.6.1.20 |
| alaSdpSystemName The neighbor host name associated with the SDP object. | column | OctetString | .1.3.6.1.4.1.6486.801.1.2.1.51.1.1.1.6.1.21 |
| alaSdpSpSourceId The neighbor Shortest Path Source Id (the LSB 20-bit of SystemId. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6486.801.1.2.1.51.1.1.1.6.1.22 |
| alaSdpAllocationType Allocation Type: Static (Manual) or Dynamic (Automatic). | column | AluAllocationType | .1.3.6.1.4.1.6486.801.1.2.1.51.1.1.1.6.1.23 |
| alaSdpDynamicType SDP type allocated for Unicast or Multicast Path according
to the tunnel type. | column | AluSdpDynamicType | .1.3.6.1.4.1.6486.801.1.2.1.51.1.1.1.6.1.24 |
| alaSdpBindCount The number of Bind-SDPs bound to this SDP. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6486.801.1.2.1.51.1.1.1.6.1.25 |
| alaSdpIsid The i-domain Service Indentifier (I-SID) for the Group Mac
assigned to this Multicast SDP. | column | Integer32 | .1.3.6.1.4.1.6486.801.1.2.1.51.1.1.1.6.1.26 |
| alaSdpMcastPortList List of egress ports for this Multicast SDP. | column | OctetString | .1.3.6.1.4.1.6486.801.1.2.1.51.1.1.1.6.1.27 |
| alaSdpCreationOrigin SDP creation origin staticly or dynamically for the tunnel types
(MPLS, PBB, VxLAN...) | column | AluSdpOriginType | .1.3.6.1.4.1.6486.801.1.2.1.51.1.1.1.6.1.28 |
| alaSdpAdminTTL The number of hops an IP packet travels through the VxLAN tunnel
before being discarded. This value is inserted into the TTL field
of the IP header in the VXLAN encapsulated heade… | column | OctetString | .1.3.6.1.4.1.6486.801.1.2.1.51.1.1.1.6.1.29 |
| alaSdpSvcType This object indicates the type of service where
this SDP is defined. | column | AluServiceType | .1.3.6.1.4.1.6486.801.1.2.1.51.1.1.1.6.1.3 |
| alaSdpDelivery This object specifies the type of delivery used
by this SDP: e.g. GRE or MPLS. The value of this
object must be specified when the row is created
and cannot be changed while the r… | column | Enumeration | .1.3.6.1.4.1.6486.801.1.2.1.51.1.1.1.6.1.4 |
| alaSdpFarEndIpAddress This object specifies the IP address of the
remote end of the MPLS or VxLAN tunnel defined
by this SDP. For SPB, this object is not used.
For VxLAN, the value of this object must… | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.6486.801.1.2.1.51.1.1.1.6.1.5 |
| alaSdpDescription Generic information about this SDP. | column | ALCATEL-ENT1-TIMETRA-SERV-MIBServObjDesc | .1.3.6.1.4.1.6486.801.1.2.1.51.1.1.1.6.1.6 |
| alaSdpLabelSignaling This object specifies the signaling protocol
used to obtain the ingress and egress labels
used in frames transmitted and received on
this SDP. When the value of this object is
'no… | column | Enumeration | .1.3.6.1.4.1.6486.801.1.2.1.51.1.1.1.6.1.7 |
| alaSdpAdminStatus The desired state of this SDP. | column | ALCATEL-ENT1-TIMETRA-TC-MIBServiceAdminStatus | .1.3.6.1.4.1.6486.801.1.2.1.51.1.1.1.6.1.8 |
| alaSdpOperStatus The operating state of this SDP. The value
'notAlive' is valid only when keep-alive is
enabled, and it means that the keep-alive
operating status is not alive. The value
'notReady… | column | Enumeration | .1.3.6.1.4.1.6486.801.1.2.1.51.1.1.1.6.1.9 |