alaPimsmV6SsmFastJoin
ALCATEL-ENT1-PIM-MIB ·
.1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.1.26
Object
scalar
r/w
Enumeration
Administratively enables/disables whether IPv6 PIM will automatically create the (S,G) routes in hardware as soon as the (S,G) routes are learned. This includes PIM Sparse Mode (S,G) routes as well as PIM SSM (S,G) routes. By default, this is disabled and the routes are not installed in hardware until the multicast traffic reaches the switch.
Context
- MIB
- ALCATEL-ENT1-PIM-MIB
- OID
.1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.1.26- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- alaPimsmGlobalConfig
- Siblings
- 25
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | enable |
2 | disable |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| alaPimsmAdminStatus Administratively enables/disables the
PIM-SM protocol on this router. | scalar | Enumeration | .1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.1.1 |
| alaPimsmBidirStatus Administratively enables/disables the
PIM BIDIR protocol on this router. | scalar | Enumeration | .1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.1.10 |
| alaPimsmBidirPeriodicInterval This is the interval at which the DF for each RPA
will periodically announce its status in a
Winner message.
A value of 0 indicates that periodic messages will
not be s… | scalar | seconds Integer32 | .1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.1.11 |
| alaPimsmBidirDFAbort Administratively enables/disables whether the DF
election will be automatically aborted if a PIM hello
is received from a PIM neighbor without the
bidirectional capable option.… | scalar | Enumeration | .1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.1.12 |
| alaPimsmNonBidirHelloPeriod The minimum time that must elapse between
alaPimNonBidirHello notifications originated by this router.
The default value of 65535 represents an 'infinite' time, in
which case, no … | scalar | seconds Unsigned32 | .1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.1.13 |
| alaPimsmNonBidirHelloMsgsRcvd The number of PIM Hello messages that have been
received by a BIDIR-capable device that do not have the
Bidirectional Capable option.
This counter is incremented if BID… | scalar | SNMPv2-SMICounter32 | .1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.1.14 |
| alaPimsmNonBidirHelloAddressType The address type stored in alaPimsmNonBidirHelloOrigin.
If no Non Bidir Hello messages have been received, this
object is set to unknown(0). | scalar | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.1.15 |
| alaPimsmNonBidirHelloOrigin The source address of the last Non Bidir Hello message
received by this device. | scalar | OctetString | .1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.1.16 |
| alaPimsmV6BidirStatus Administratively enables/disables the
PIM IPv6 BIDIR protocol on this router. | scalar | Enumeration | .1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.1.17 |
| alaPimsmRPHashStatus Administratively enables/disables applying the PIM hash function
defined in RFC 4601 when selecting an RP from two or more equal
group-range-to-RP mappings. | scalar | Enumeration | .1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.1.18 |
| alaPimsmBidirSsmCompat Administratively enables/disables whether PIM
BIDIR will support receiving IGMPv3 source-specific
joins and treat them as a (*,G) join.
By default, IGMPv3 source-specific joins ar… | scalar | Enumeration | .1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.1.19 |
| alaPimsmMaxRPs The maximum number of C-RPs allowed in the PIM-SM
domain. | scalar | Integer32 | .1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.1.2 |
| alaPimsmV6BidirSsmCompat Administratively enables/disables whether IPv6 PIM
BIDIR will support receiving MLDv2 source-specific
joins and treat them as a (*,G) join.
By default, MLDv2 source-specific joins… | scalar | Enumeration | .1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.1.20 |
| alaPimsmBidirFastJoin Administratively enables/disables whether PIM
BIDIR will automatically create the routes in hardware
as soon as the BIDIR (*,G) routes are learned.
By default, this is disabled an… | scalar | Enumeration | .1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.1.21 |
| alaPimsmV6BidirFastJoin Administratively enables/disables whether IPv6 PIM
BIDIR will automatically create the routes in hardware
as soon as the BIDIR (*,G) routes are learned.
By default, this is disabl… | scalar | Enumeration | .1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.1.22 |
| alaPimsmAsmFastJoin Administratively enables/disables whether PIM
ASM will automatically create the (*,G) routes in
hardware as soon as the ASM (*,G) routes are learned.
By default, this is disabled … | scalar | Enumeration | .1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.1.23 |
| alaPimsmV6AsmFastJoin Administratively enables/disables whether IPv6 PIM
ASM will automatically create the (*,G) routes in
hardware as soon as the ASM (*,G) routes are learned.
By default, this is dis… | scalar | Enumeration | .1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.1.24 |
| alaPimsmSsmFastJoin Administratively enables/disables whether PIM
will automatically create the (S,G) routes in
hardware as soon as the (S,G) routes are learned.
This includes PIM Sparse Mode (S,G)… | scalar | Enumeration | .1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.1.25 |
| alaPimsmProbeTime When NULL Registers are used, this is the time
between sending a NULL Register and the Register-
Suppression-Timer expiring unless it is restarted
by receiving a Register-Stop. | scalar | seconds Integer32 | .1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.1.3 |
| alaPimsmOldRegisterMessageSupport Specifies the application of the checksum function on
received Register messages in the PIM-SM domain. When
set to full(2), the checksum for a register message
is computed for th… | scalar | Enumeration | .1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.1.4 |
| alaPimsmAdminSPTConfig Administratively enables/disables SPT Switchover
upon receiving the first data packet. | scalar | Enumeration | .1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.1.5 |
| alaPimsmRPThreshold Sets the RP threshold value (in bps) to be used
in determining when to switch to native
forwarding at the RP. The value of 0
disables the RP Threshold functionality. | scalar | Integer32 | .1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.1.6 |
| alaPimsmV6AdminStatus Administratively enables/disables the
PIM-SM IPv6 protocol on this router. | scalar | Enumeration | .1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.1.7 |
| alaPimsmV6SPTConfig Administratively enables/disables PIM IPv6 SPT Switchover
upon receiving the first data packet. | scalar | Enumeration | .1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.1.8 |
| alaPimsmV6RPSwitchover Administratively enables/disables whether PIM IPv6
will attempt to switch to native forwarding at the RP
upon receiving the first register-encapsulated packet. | scalar | Enumeration | .1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.1.9 |