alaPimsmNonBidirHelloMsgsRcvd

ALCATEL-ENT1-PIM-MIB · .1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.1.14
MIB view Table view

Object

scalar SNMPv2-SMICounter32 
The number of PIM Hello messages that have been
received by a BIDIR-capable device that do not have the
Bidirectional Capable option.
          
This counter is incremented if BIDIR mode is enabled on
this router and a PIM Hello message is received from a
PIM neighbor that does not include the Bidirectional Capable
option. 
          
By default, the reception of these messages will not 
effect the BIDIR DF election.  The alaPimsmBidirDFAbort 
object may be used to change the default behavior
and have the DF election aborted whenever a BIDIR-capable
router receives a PIM hello from a non-BIDIR-capable
router.

Context

MIB
ALCATEL-ENT1-PIM-MIB
OID
.1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.1.14
Type
scalar
Access
readonly
Status
current
Parent
alaPimsmGlobalConfig
Siblings
25

Syntax

SNMPv2-SMICounter32
Source
SNMPv2-SMICounter32
Base type
Unsigned32

Values & Constraints

Type Constraints
range: 0..4294967295

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
alaPimsmAdminStatus
Administratively enables/disables the PIM-SM protocol on this router.
scalarEnumeration.1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.1.1
alaPimsmBidirStatus
Administratively enables/disables the PIM BIDIR protocol on this router.
scalarEnumeration.1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.1.10
alaPimsmBidirPeriodicInterval
This is the interval at which the DF for each RPA will periodically announce its status in a Winner message. A value of 0 indicates that periodic messages will not be s…
scalarseconds Integer32.1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.1.11
alaPimsmBidirDFAbort
Administratively enables/disables whether the DF election will be automatically aborted if a PIM hello is received from a PIM neighbor without the bidirectional capable option.…
scalarEnumeration.1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.1.12
alaPimsmNonBidirHelloPeriod
The minimum time that must elapse between alaPimNonBidirHello notifications originated by this router. The default value of 65535 represents an 'infinite' time, in which case, no …
scalarseconds Unsigned32.1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.1.13
alaPimsmNonBidirHelloAddressType
The address type stored in alaPimsmNonBidirHelloOrigin. If no Non Bidir Hello messages have been received, this object is set to unknown(0).
scalarINET-ADDRESS-MIBInetAddressType.1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.1.15
alaPimsmNonBidirHelloOrigin
The source address of the last Non Bidir Hello message received by this device.
scalarOctetString.1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.1.16
alaPimsmV6BidirStatus
Administratively enables/disables the PIM IPv6 BIDIR protocol on this router.
scalarEnumeration.1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.1.17
alaPimsmRPHashStatus
Administratively enables/disables applying the PIM hash function defined in RFC 4601 when selecting an RP from two or more equal group-range-to-RP mappings.
scalarEnumeration.1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.1.18
alaPimsmBidirSsmCompat
Administratively enables/disables whether PIM BIDIR will support receiving IGMPv3 source-specific joins and treat them as a (*,G) join. By default, IGMPv3 source-specific joins ar…
scalarEnumeration.1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.1.19
alaPimsmMaxRPs
The maximum number of C-RPs allowed in the PIM-SM domain.
scalarInteger32.1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.1.2
alaPimsmV6BidirSsmCompat
Administratively enables/disables whether IPv6 PIM BIDIR will support receiving MLDv2 source-specific joins and treat them as a (*,G) join. By default, MLDv2 source-specific joins…
scalarEnumeration.1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.1.20
alaPimsmBidirFastJoin
Administratively enables/disables whether PIM BIDIR will automatically create the routes in hardware as soon as the BIDIR (*,G) routes are learned. By default, this is disabled an…
scalarEnumeration.1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.1.21
alaPimsmV6BidirFastJoin
Administratively enables/disables whether IPv6 PIM BIDIR will automatically create the routes in hardware as soon as the BIDIR (*,G) routes are learned. By default, this is disabl…
scalarEnumeration.1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.1.22
alaPimsmAsmFastJoin
Administratively enables/disables whether PIM ASM will automatically create the (*,G) routes in hardware as soon as the ASM (*,G) routes are learned. By default, this is disabled …
scalarEnumeration.1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.1.23
alaPimsmV6AsmFastJoin
Administratively enables/disables whether IPv6 PIM ASM will automatically create the (*,G) routes in hardware as soon as the ASM (*,G) routes are learned. By default, this is dis…
scalarEnumeration.1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.1.24
alaPimsmSsmFastJoin
Administratively enables/disables whether PIM will automatically create the (S,G) routes in hardware as soon as the (S,G) routes are learned. This includes PIM Sparse Mode (S,G)…
scalarEnumeration.1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.1.25
alaPimsmV6SsmFastJoin
Administratively enables/disables whether IPv6 PIM will automatically create the (S,G) routes in hardware as soon as the (S,G) routes are learned. This includes PIM Sparse Mode (S…
scalarEnumeration.1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.1.26
alaPimsmProbeTime
When NULL Registers are used, this is the time between sending a NULL Register and the Register- Suppression-Timer expiring unless it is restarted by receiving a Register-Stop.
scalarseconds Integer32.1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.1.3
alaPimsmOldRegisterMessageSupport
Specifies the application of the checksum function on received Register messages in the PIM-SM domain. When set to full(2), the checksum for a register message is computed for th…
scalarEnumeration.1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.1.4
alaPimsmAdminSPTConfig
Administratively enables/disables SPT Switchover upon receiving the first data packet.
scalarEnumeration.1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.1.5
alaPimsmRPThreshold
Sets the RP threshold value (in bps) to be used in determining when to switch to native forwarding at the RP. The value of 0 disables the RP Threshold functionality.
scalarInteger32.1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.1.6
alaPimsmV6AdminStatus
Administratively enables/disables the PIM-SM IPv6 protocol on this router.
scalarEnumeration.1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.1.7
alaPimsmV6SPTConfig
Administratively enables/disables PIM IPv6 SPT Switchover upon receiving the first data packet.
scalarEnumeration.1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.1.8
alaPimsmV6RPSwitchover
Administratively enables/disables whether PIM IPv6 will attempt to switch to native forwarding at the RP upon receiving the first register-encapsulated packet.
scalarEnumeration.1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.1.9