alaPimsmAsmFastJoin
ALCATEL-ENT1-PIM-MIB ·
.1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.1.23
Object
scalar
r/w
Enumeration
Administratively enables/disables whether PIM ASM will automatically create the (*,G) routes in hardware as soon as the ASM (*,G) routes are learned. By default, this is disabled and the routes are not installed in hardware until the multicast traffic reaches the switch.
Context
- MIB
- ALCATEL-ENT1-PIM-MIB
- OID
.1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.1.23- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- alaPimsmGlobalConfig
- Siblings
- 25
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | enable |
2 | disable |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| alaPimsmAdminStatus Administratively enables/disables the
PIM-SM protocol on this router. | scalar | Enumeration | .1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.1.1 |
| alaPimsmBidirStatus Administratively enables/disables the
PIM BIDIR protocol on this router. | scalar | Enumeration | .1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.1.10 |
| alaPimsmBidirPeriodicInterval This is the interval at which the DF for each RPA
will periodically announce its status in a
Winner message.
A value of 0 indicates that periodic messages will
not be s… | scalar | seconds Integer32 | .1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.1.11 |
| alaPimsmBidirDFAbort Administratively enables/disables whether the DF
election will be automatically aborted if a PIM hello
is received from a PIM neighbor without the
bidirectional capable option.… | scalar | Enumeration | .1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.1.12 |
| alaPimsmNonBidirHelloPeriod The minimum time that must elapse between
alaPimNonBidirHello notifications originated by this router.
The default value of 65535 represents an 'infinite' time, in
which case, no … | scalar | seconds Unsigned32 | .1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.1.13 |
| alaPimsmNonBidirHelloMsgsRcvd The number of PIM Hello messages that have been
received by a BIDIR-capable device that do not have the
Bidirectional Capable option.
This counter is incremented if BID… | scalar | SNMPv2-SMICounter32 | .1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.1.14 |
| alaPimsmNonBidirHelloAddressType The address type stored in alaPimsmNonBidirHelloOrigin.
If no Non Bidir Hello messages have been received, this
object is set to unknown(0). | scalar | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.1.15 |
| alaPimsmNonBidirHelloOrigin The source address of the last Non Bidir Hello message
received by this device. | scalar | OctetString | .1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.1.16 |
| alaPimsmV6BidirStatus Administratively enables/disables the
PIM IPv6 BIDIR protocol on this router. | scalar | Enumeration | .1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.1.17 |
| alaPimsmRPHashStatus Administratively enables/disables applying the PIM hash function
defined in RFC 4601 when selecting an RP from two or more equal
group-range-to-RP mappings. | scalar | Enumeration | .1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.1.18 |
| alaPimsmBidirSsmCompat Administratively enables/disables whether PIM
BIDIR will support receiving IGMPv3 source-specific
joins and treat them as a (*,G) join.
By default, IGMPv3 source-specific joins ar… | scalar | Enumeration | .1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.1.19 |
| alaPimsmMaxRPs The maximum number of C-RPs allowed in the PIM-SM
domain. | scalar | Integer32 | .1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.1.2 |
| alaPimsmV6BidirSsmCompat Administratively enables/disables whether IPv6 PIM
BIDIR will support receiving MLDv2 source-specific
joins and treat them as a (*,G) join.
By default, MLDv2 source-specific joins… | scalar | Enumeration | .1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.1.20 |
| alaPimsmBidirFastJoin Administratively enables/disables whether PIM
BIDIR will automatically create the routes in hardware
as soon as the BIDIR (*,G) routes are learned.
By default, this is disabled an… | scalar | Enumeration | .1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.1.21 |
| alaPimsmV6BidirFastJoin Administratively enables/disables whether IPv6 PIM
BIDIR will automatically create the routes in hardware
as soon as the BIDIR (*,G) routes are learned.
By default, this is disabl… | scalar | Enumeration | .1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.1.22 |
| alaPimsmV6AsmFastJoin Administratively enables/disables whether IPv6 PIM
ASM will automatically create the (*,G) routes in
hardware as soon as the ASM (*,G) routes are learned.
By default, this is dis… | scalar | Enumeration | .1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.1.24 |
| alaPimsmSsmFastJoin Administratively enables/disables whether PIM
will automatically create the (S,G) routes in
hardware as soon as the (S,G) routes are learned.
This includes PIM Sparse Mode (S,G)… | scalar | Enumeration | .1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.1.25 |
| alaPimsmV6SsmFastJoin Administratively enables/disables whether IPv6 PIM
will automatically create the (S,G) routes in hardware
as soon as the (S,G) routes are learned.
This includes PIM Sparse Mode (S… | scalar | Enumeration | .1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.1.26 |
| alaPimsmProbeTime When NULL Registers are used, this is the time
between sending a NULL Register and the Register-
Suppression-Timer expiring unless it is restarted
by receiving a Register-Stop. | scalar | seconds Integer32 | .1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.1.3 |
| alaPimsmOldRegisterMessageSupport Specifies the application of the checksum function on
received Register messages in the PIM-SM domain. When
set to full(2), the checksum for a register message
is computed for th… | scalar | Enumeration | .1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.1.4 |
| alaPimsmAdminSPTConfig Administratively enables/disables SPT Switchover
upon receiving the first data packet. | scalar | Enumeration | .1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.1.5 |
| alaPimsmRPThreshold Sets the RP threshold value (in bps) to be used
in determining when to switch to native
forwarding at the RP. The value of 0
disables the RP Threshold functionality. | scalar | Integer32 | .1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.1.6 |
| alaPimsmV6AdminStatus Administratively enables/disables the
PIM-SM IPv6 protocol on this router. | scalar | Enumeration | .1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.1.7 |
| alaPimsmV6SPTConfig Administratively enables/disables PIM IPv6 SPT Switchover
upon receiving the first data packet. | scalar | Enumeration | .1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.1.8 |
| alaPimsmV6RPSwitchover Administratively enables/disables whether PIM IPv6
will attempt to switch to native forwarding at the RP
upon receiving the first register-encapsulated packet. | scalar | Enumeration | .1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.1.9 |