alaOspfRestartHelperSupport

ALCATEL-ENT1-OSPF-MIB · .1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.19
MIB view Table view

Object

scalar deprecated r/w Enumeration 
The router's support for acting as an OSPF hitless restart helper.

Context

MIB
ALCATEL-ENT1-OSPF-MIB
OID
.1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.19
Type
scalar
Access
readwrite
Status
deprecated
Parent
alaProtocolOspf
Siblings
33

Syntax

Enumeration

Values & Constraints

Enumerated Values
1enable
2disable

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
alaOspfRouteTable
OSPF routing table which contains the network routes.
table-.1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.12
alaOspfBdrRouterTable
OSPF routing table which contains the routes to border (ABR and ASBR) routers.
table-.1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.13
alaOspfIfMd5Table
The OSPF Interface MD5 Table describes the MD5 key management for OSPF interfaces.
table-.1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.16
alaOspfIfAugTable
Expansion for ospfIfTable
table-.1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.17
alaOspfVirtIfAugTable
Expansion for ospfVirtIfTable
table-.1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.18
alaOspfRedistRouteTag
A 32-bit value tagged to each OSPF internal route that is redistributed in to other routing protocol domains. The lower 16-bits typically indicate the autonomous system number.
scalarInteger32.1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.2
alaOspfRestartHelperStrictLSAChecking deprecated
Indicates whether or not a changed LSA will result in termination of graceful restart by a helping router. Deprecated with IETF object ospfRestartStrictLsaChecking
scalarEnumeration.1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.20
alaOspfRestartHelperStatus
Indicates whether this OSPF router is operating as a Helper to a restarting router.
scalarEnumeration.1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.21
alaOspfRFC1583Compatibility deprecated
Indicates metrics used to choose among multiple AS- external-LSAs. When RFC1583Compatibility is set to enabled, only cost will be used when choosing among multiple AS-external-LSA…
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.22
alaOspfOpaqueLsaSupport
The router's support for Opaque LSA types.
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.23
alaOspfTrafficEngineeringSupport
The router's support for OSPF traffic engineering.
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.24
alaOspfReferenceBandwidth deprecated
Reference bandwidth in kilobits/second for calculating default interface metrics. The default value is 100,000 KBPS (100 MBPS) deprecated by IETF mib object ospfReferenceBandwidth
scalarSNMPv2-SMIUnsigned32.1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.25
alaOspfRestartSupport deprecated
The router's support for OSPF hitless restart. Options include: no restart support, only planned restarts or both planned and unplanned restarts. Deprecated by IETF object ospfRes…
scalarEnumeration.1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.26
alaOspfRestartInterval deprecated
Configured OSPF hitless restart timeout interval. Deprecated by IETF mib ospfRestartInterval
scalarseconds Integer32.1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.27
alaOspfRestartStatus deprecated
Current status of OSPF hitless restart. The status of hitless restart is unplannedRestart after a CMM takeover. Before CMM takeover, the status is plannedRestart.
scalarEnumeration.1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.28
alaOspfRestartAge deprecated
Remaining time in current OSPF hitless restart interval. Deprecated by alaOspfRestartAge
scalarseconds SNMPv2-SMIUnsigned32.1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.29
alaOspfTimerSpfDelay
Number of seconds to delay the SPF calculation after receiving a topology change. This value should not be greater than SPF hold time.
scalarInteger32.1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.3
alaOspfRestartExitReason deprecated
Describes the outcome of the last attempt at a hitless restart. If the value is 'none', no restart has yet been attempted. If the value is 'inProgress', a restart attempt is curre…
scalarEnumeration.1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.30
alaOspfNbrAugTable
Extensions to the ospfNbrTable
table-.1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.31
alaOspfVirtNbrAugTable
Extensions to ospfVirtNbrTable
table-.1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.32
alaOspfRestartInitiate
Initiates a planned graceful restart, if set to plannedRestart.
scalarEnumeration.1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.33
alaOspfAreaAugTable
Extensions to ospfAreaTable
table-.1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.35
alaOspfExtLsdbAugTable
Extensions to ospfExtLsdbTable
table-.1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.36
alaOspfAreaAggregateAugTable
Extensions to ospfAreaAggregateTable
table-.1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.38
alaOspfDefaultOriginate
Indicates whether this ASBR router originates the default route into the OSPF normal area(s). If set to 'only', the default route is advertised into the OSPF normal area, provide…
scalarEnumeration.1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.39
alaOspfTimerSpfHold
Minimum time, in seconds, between two consecutive SPF calculations. This value should not be less than SPF delay time.
scalarInteger32.1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.4
alaOspfDefaultOriginateMetricType
Type of metric to be used with the default route.
scalarEnumeration.1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.40
alaOspfDefaultOriginateMetric
Default metric to be used for the default route.
scalarInteger32.1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.41
alaOspfBfdStatus
Enables or disables bfd for OSPF protocol
scalarEnumeration.1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.42
alaOspfBfdAllInterfaceStatus
Enables or disables bfd for all OSPF interfaces
scalarEnumeration.1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.43
alaOspfOpaqueTransitCapability
Enables or disables opaque LSA accept and retransmit capability for OSPF
scalarEnumeration.1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.44
alaOspfRouteNumber
The number of network routes in OSPF routing table.
scalarSNMPv2-SMICounter32.1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.7
alaOspfMTUCheck
Enable or disable the check for MTU size in database description packets. Disabled by default
scalarEnumeration.1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.8