alaOspfRFC1583Compatibility
ALCATEL-ENT1-OSPF-MIB ·
.1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.22
Object
Indicates metrics used to choose among multiple AS- external-LSAs. When RFC1583Compatibility is set to enabled, only cost will be used when choosing among multiple AS-external-LSAs advertising the same destination. When RFC1583Compatibility is set to disabled, preference will be driven first by type of path using cost only to break ties. Deprecated by IETF standard object ospfRFC1583Compatibility
Context
- MIB
- ALCATEL-ENT1-OSPF-MIB
- OID
.1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.22- Type
- scalar
- Access
- readonly
- Status
- deprecated
- Parent
- alaProtocolOspf
- Siblings
- 33
Values & Constraints
Type Values
1 | true |
2 | false |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| alaOspfRouteTable OSPF routing table which contains the network routes. | table | - | .1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.12 |
| alaOspfBdrRouterTable OSPF routing table which contains the routes to border
(ABR and ASBR) routers. | table | - | .1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.13 |
| alaOspfIfMd5Table The OSPF Interface MD5 Table describes the MD5 key
management for OSPF interfaces. | table | - | .1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.16 |
| alaOspfIfAugTable Expansion for ospfIfTable | table | - | .1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.17 |
| alaOspfVirtIfAugTable Expansion for ospfVirtIfTable | table | - | .1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.18 |
| alaOspfRestartHelperSupport deprecated The router's support for acting as an OSPF hitless restart helper. | scalar | Enumeration | .1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.19 |
| alaOspfRedistRouteTag A 32-bit value tagged to each OSPF internal route that
is redistributed in to other routing protocol domains. The
lower 16-bits typically indicate the autonomous system number. | scalar | Integer32 | .1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.2 |
| alaOspfRestartHelperStrictLSAChecking deprecated Indicates whether or not a changed LSA will result in termination
of graceful restart by a helping router.
Deprecated with IETF object ospfRestartStrictLsaChecking | scalar | Enumeration | .1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.20 |
| alaOspfRestartHelperStatus Indicates whether this OSPF router is operating as a Helper to a
restarting router. | scalar | Enumeration | .1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.21 |
| alaOspfOpaqueLsaSupport The router's support for Opaque LSA types. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.23 |
| alaOspfTrafficEngineeringSupport The router's support for OSPF traffic engineering. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.24 |
| alaOspfReferenceBandwidth deprecated Reference bandwidth in kilobits/second for
calculating default interface metrics. The
default value is 100,000 KBPS (100 MBPS)
deprecated by IETF mib object ospfReferenceBandwidth | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.25 |
| alaOspfRestartSupport deprecated The router's support for OSPF hitless restart.
Options include: no restart support, only planned
restarts or both planned and unplanned restarts.
Deprecated by IETF object ospfRes… | scalar | Enumeration | .1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.26 |
| alaOspfRestartInterval deprecated Configured OSPF hitless restart timeout interval.
Deprecated by IETF mib ospfRestartInterval | scalar | seconds Integer32 | .1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.27 |
| alaOspfRestartStatus deprecated Current status of OSPF hitless restart. The status of hitless restart is
unplannedRestart after a CMM takeover. Before CMM takeover, the status is
plannedRestart. | scalar | Enumeration | .1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.28 |
| alaOspfRestartAge deprecated Remaining time in current OSPF hitless restart
interval.
Deprecated by alaOspfRestartAge | scalar | seconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.29 |
| alaOspfTimerSpfDelay Number of seconds to delay the SPF calculation after
receiving a topology change. This value should not be
greater than SPF hold time. | scalar | Integer32 | .1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.3 |
| alaOspfRestartExitReason deprecated Describes the outcome of the last attempt at a
hitless restart. If the value is 'none', no restart
has yet been attempted. If the value is 'inProgress',
a restart attempt is curre… | scalar | Enumeration | .1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.30 |
| alaOspfNbrAugTable Extensions to the ospfNbrTable | table | - | .1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.31 |
| alaOspfVirtNbrAugTable Extensions to ospfVirtNbrTable | table | - | .1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.32 |
| alaOspfRestartInitiate Initiates a planned graceful restart, if set to plannedRestart. | scalar | Enumeration | .1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.33 |
| alaOspfAreaAugTable Extensions to ospfAreaTable | table | - | .1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.35 |
| alaOspfExtLsdbAugTable Extensions to ospfExtLsdbTable | table | - | .1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.36 |
| alaOspfAreaAggregateAugTable Extensions to ospfAreaAggregateTable | table | - | .1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.38 |
| alaOspfDefaultOriginate Indicates whether this ASBR router originates the default route
into the OSPF normal area(s). If set to 'only', the default route
is advertised into the OSPF normal area, provide… | scalar | Enumeration | .1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.39 |
| alaOspfTimerSpfHold Minimum time, in seconds, between two consecutive SPF
calculations. This value should not be less than SPF delay time. | scalar | Integer32 | .1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.4 |
| alaOspfDefaultOriginateMetricType Type of metric to be used with the default route. | scalar | Enumeration | .1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.40 |
| alaOspfDefaultOriginateMetric Default metric to be used for the default route. | scalar | Integer32 | .1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.41 |
| alaOspfBfdStatus Enables or disables bfd for OSPF protocol | scalar | Enumeration | .1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.42 |
| alaOspfBfdAllInterfaceStatus Enables or disables bfd for all OSPF interfaces | scalar | Enumeration | .1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.43 |
| alaOspfOpaqueTransitCapability Enables or disables opaque LSA accept and retransmit capability for OSPF | scalar | Enumeration | .1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.44 |
| alaOspfRouteNumber The number of network routes in OSPF routing table. | scalar | SNMPv2-SMICounter32 | .1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.7 |
| alaOspfMTUCheck Enable or disable the check for MTU size in database description
packets. Disabled by default | scalar | Enumeration | .1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.8 |