alaOspfNbrAugTable

ALCATEL-ENT1-OSPF-MIB · .1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.31

Object

table

Extensions to the ospfNbrTable

Context

MIB: ALCATEL-ENT1-OSPF-MIB
OID: .1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.31
Type: table
Status: current
Parent: alaProtocolOspf
Siblings: 33
Children: 1

Syntax

No syntax metadata recorded.

Values & Constraints

No enumerated values or constraints recorded.

Related Objects

Sibling Objects

Object	Type	Syntax	OID
alaOspfRouteTable OSPF routing table which contains the network routes.	table	-	`.1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.12`
alaOspfBdrRouterTable OSPF routing table which contains the routes to border (ABR and ASBR) routers.	table	-	`.1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.13`
alaOspfIfMd5Table The OSPF Interface MD5 Table describes the MD5 key management for OSPF interfaces.	table	-	`.1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.16`
alaOspfIfAugTable Expansion for ospfIfTable	table	-	`.1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.17`
alaOspfVirtIfAugTable Expansion for ospfVirtIfTable	table	-	`.1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.18`
alaOspfRestartHelperSupport deprecated The router's support for acting as an OSPF hitless restart helper.	scalar	Enumeration	`.1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.19`
alaOspfRedistRouteTag A 32-bit value tagged to each OSPF internal route that is redistributed in to other routing protocol domains. The lower 16-bits typically indicate the autonomous system number.	scalar	Integer32	`.1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.2`
alaOspfRestartHelperStrictLSAChecking deprecated Indicates whether or not a changed LSA will result in termination of graceful restart by a helping router. Deprecated with IETF object ospfRestartStrictLsaChecking	scalar	Enumeration	`.1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.20`
alaOspfRestartHelperStatus Indicates whether this OSPF router is operating as a Helper to a restarting router.	scalar	Enumeration	`.1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.21`
alaOspfRFC1583Compatibility deprecated Indicates metrics used to choose among multiple AS- external-LSAs. When RFC1583Compatibility is set to enabled, only cost will be used when choosing among multiple AS-external-LSA…	scalar	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.22`
alaOspfOpaqueLsaSupport The router's support for Opaque LSA types.	scalar	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.23`
alaOspfTrafficEngineeringSupport The router's support for OSPF traffic engineering.	scalar	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.24`
alaOspfReferenceBandwidth deprecated Reference bandwidth in kilobits/second for calculating default interface metrics. The default value is 100,000 KBPS (100 MBPS) deprecated by IETF mib object ospfReferenceBandwidth	scalar	SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.25`
alaOspfRestartSupport deprecated The router's support for OSPF hitless restart. Options include: no restart support, only planned restarts or both planned and unplanned restarts. Deprecated by IETF object ospfRes…	scalar	Enumeration	`.1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.26`
alaOspfRestartInterval deprecated Configured OSPF hitless restart timeout interval. Deprecated by IETF mib ospfRestartInterval	scalar	seconds Integer32	`.1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.27`
alaOspfRestartStatus deprecated Current status of OSPF hitless restart. The status of hitless restart is unplannedRestart after a CMM takeover. Before CMM takeover, the status is plannedRestart.	scalar	Enumeration	`.1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.28`
alaOspfRestartAge deprecated Remaining time in current OSPF hitless restart interval. Deprecated by alaOspfRestartAge	scalar	seconds SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.29`
alaOspfTimerSpfDelay Number of seconds to delay the SPF calculation after receiving a topology change. This value should not be greater than SPF hold time.	scalar	Integer32	`.1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.3`
alaOspfRestartExitReason deprecated Describes the outcome of the last attempt at a hitless restart. If the value is 'none', no restart has yet been attempted. If the value is 'inProgress', a restart attempt is curre…	scalar	Enumeration	`.1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.30`
alaOspfVirtNbrAugTable Extensions to ospfVirtNbrTable	table	-	`.1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.32`
alaOspfRestartInitiate Initiates a planned graceful restart, if set to plannedRestart.	scalar	Enumeration	`.1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.33`
alaOspfAreaAugTable Extensions to ospfAreaTable	table	-	`.1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.35`
alaOspfExtLsdbAugTable Extensions to ospfExtLsdbTable	table	-	`.1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.36`
alaOspfAreaAggregateAugTable Extensions to ospfAreaAggregateTable	table	-	`.1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.38`
alaOspfDefaultOriginate Indicates whether this ASBR router originates the default route into the OSPF normal area(s). If set to 'only', the default route is advertised into the OSPF normal area, provide…	scalar	Enumeration	`.1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.39`
alaOspfTimerSpfHold Minimum time, in seconds, between two consecutive SPF calculations. This value should not be less than SPF delay time.	scalar	Integer32	`.1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.4`
alaOspfDefaultOriginateMetricType Type of metric to be used with the default route.	scalar	Enumeration	`.1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.40`
alaOspfDefaultOriginateMetric Default metric to be used for the default route.	scalar	Integer32	`.1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.41`
alaOspfBfdStatus Enables or disables bfd for OSPF protocol	scalar	Enumeration	`.1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.42`
alaOspfBfdAllInterfaceStatus Enables or disables bfd for all OSPF interfaces	scalar	Enumeration	`.1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.43`
alaOspfOpaqueTransitCapability Enables or disables opaque LSA accept and retransmit capability for OSPF	scalar	Enumeration	`.1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.44`
alaOspfRouteNumber The number of network routes in OSPF routing table.	scalar	SNMPv2-SMICounter32	`.1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.7`
alaOspfMTUCheck Enable or disable the check for MTU size in database description packets. Disabled by default	scalar	Enumeration	`.1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.8`

Child Objects