alaLbdGlobalRemoteConfigStatus
ALCATEL-ENT1-LBD-MIB ·
.1.3.6.1.4.1.6486.801.1.2.1.82.1.1.14
Object
scalar
r/w
Enumeration
This object is used for enabling or disabling the processing of LBD frames originating from a different system (non local origin). On enable : The switch processes LBD frames originating from different switch. On disable : The switch drops/ignores remote-origin LBD packet and counts as an invalid frame
Context
- MIB
- ALCATEL-ENT1-LBD-MIB
- OID
.1.3.6.1.4.1.6486.801.1.2.1.82.1.1.14- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- alcatelIND1LBDMIBObjects
- Siblings
- 13
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | enable |
2 | disable |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| alaLbdGlobalConfigStatus This object is used to enable or disable LBD on the
switch. The value enable (1) indicates that LBD should be
enabled on the switch. The value disable (2) is used to
disable LBD o… | scalar | Enumeration | .1.3.6.1.4.1.6486.801.1.2.1.82.1.1.1 |
| alaLbdVlanConfigLbdAdminStatus This object is used to enable or disable loopback-detection Vlan.
The value enable(1) indicates that loopback-detection is
enabled on this vlan. The value disable(2) indicates t… | scalar | Enumeration | .1.3.6.1.4.1.6486.801.1.2.1.82.1.1.10 |
| alaLbdVlanConfigAllVlan This object is used to enable or disable loopback-detection on all Vlans.
The value enable(1) indicates that loopback-detection is
enabled on on all vlans. The value disab… | scalar | Enumeration | .1.3.6.1.4.1.6486.801.1.2.1.82.1.1.11 |
| alaLbdVlanConfig | node | - | .1.3.6.1.4.1.6486.801.1.2.1.82.1.1.12 |
| alaLbdVlanViolationStatistics | node | - | .1.3.6.1.4.1.6486.801.1.2.1.82.1.1.13 |
| alaLbdGlobalConfigTransmissionTimer This object is used to set the transmission timer for LBD
feature for PORT globally. It is allowed to modify the timer at any
instance but the new timer value will be effective fr… | scalar | seconds Unsigned32 | .1.3.6.1.4.1.6486.801.1.2.1.82.1.1.2 |
| alaLbdGlobalClearPortStat Defines the global clear statistics control for port for
LBD.
default(0) - default value for this object,
reset(1) - indicates that LBD should clear all statistic
counters relat… | scalar | Enumeration | .1.3.6.1.4.1.6486.801.1.2.1.82.1.1.3 |
| alaLbdGlobalConfigAutorecoveryTimer This object is used to make up all the disabled ports which
was caused due to loop-back detection. Auto recovery can be disabled by
Setting this value to 0 sec | scalar | seconds Unsigned32 | .1.3.6.1.4.1.6486.801.1.2.1.82.1.1.4 |
| alaLbdPortConfig | node | - | .1.3.6.1.4.1.6486.801.1.2.1.82.1.1.5 |
| alaLbdPortStat | node | - | .1.3.6.1.4.1.6486.801.1.2.1.82.1.1.6 |
| alaLbdTrapsObj | node | - | .1.3.6.1.4.1.6486.801.1.2.1.82.1.1.7 |
| alaLbdGlobalStatusAFDConfig Global Enable of LBD is done by admin or auto-fabric | scalar | Enumeration | .1.3.6.1.4.1.6486.801.1.2.1.82.1.1.8 |
| alaLbdVlanGlobalConfigTransmissionTimer This object is used to set the transmission timer for LBD
feature for VLAN globally. It is allowed to modify the timer at any
instance but the new timer value will be effect… | scalar | seconds Unsigned32 | .1.3.6.1.4.1.6486.801.1.2.1.82.1.1.9 |