alaLbdGlobalConfigTransmissionTimer
ALCATEL-ENT1-LBD-MIB ·
.1.3.6.1.4.1.6486.801.1.2.1.82.1.1.2
Object
scalar
r/w
seconds Unsigned32
This object is used to set the transmission timer for LBD feature for PORT globally. It is allowed to modify the timer at any instance but the new timer value will be effective from next time the timer restarts.
Context
- MIB
- ALCATEL-ENT1-LBD-MIB
- OID
.1.3.6.1.4.1.6486.801.1.2.1.82.1.1.2- Type
- scalar
- Access
- readwrite
- Status
- current
- Units
- seconds
- Parent
- alcatelIND1LBDMIBObjects
- Siblings
- 13
Syntax
seconds Unsigned32
Values & Constraints
Object Constraints
range: 5-600
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| alaLbdGlobalConfigStatus This object is used to enable or disable LBD on the
switch. The value enable (1) indicates that LBD should be
enabled on the switch. The value disable (2) is used to
disable LBD o… | scalar | Enumeration | .1.3.6.1.4.1.6486.801.1.2.1.82.1.1.1 |
| alaLbdVlanConfigLbdAdminStatus This object is used to enable or disable loopback-detection Vlan.
The value enable(1) indicates that loopback-detection is
enabled on this vlan. The value disable(2) indicates t… | scalar | Enumeration | .1.3.6.1.4.1.6486.801.1.2.1.82.1.1.10 |
| alaLbdVlanConfigAllVlan This object is used to enable or disable loopback-detection on all Vlans.
The value enable(1) indicates that loopback-detection is
enabled on on all vlans. The value disab… | scalar | Enumeration | .1.3.6.1.4.1.6486.801.1.2.1.82.1.1.11 |
| alaLbdVlanConfig | node | - | .1.3.6.1.4.1.6486.801.1.2.1.82.1.1.12 |
| alaLbdVlanViolationStatistics | node | - | .1.3.6.1.4.1.6486.801.1.2.1.82.1.1.13 |
| alaLbdGlobalRemoteConfigStatus This object is used for enabling or disabling
the processing of LBD frames originating from a
different system (non local origin).
On enable : The switch processes LBD frames
o… | scalar | Enumeration | .1.3.6.1.4.1.6486.801.1.2.1.82.1.1.14 |
| alaLbdGlobalClearPortStat Defines the global clear statistics control for port for
LBD.
default(0) - default value for this object,
reset(1) - indicates that LBD should clear all statistic
counters relat… | scalar | Enumeration | .1.3.6.1.4.1.6486.801.1.2.1.82.1.1.3 |
| alaLbdGlobalConfigAutorecoveryTimer This object is used to make up all the disabled ports which
was caused due to loop-back detection. Auto recovery can be disabled by
Setting this value to 0 sec | scalar | seconds Unsigned32 | .1.3.6.1.4.1.6486.801.1.2.1.82.1.1.4 |
| alaLbdPortConfig | node | - | .1.3.6.1.4.1.6486.801.1.2.1.82.1.1.5 |
| alaLbdPortStat | node | - | .1.3.6.1.4.1.6486.801.1.2.1.82.1.1.6 |
| alaLbdTrapsObj | node | - | .1.3.6.1.4.1.6486.801.1.2.1.82.1.1.7 |
| alaLbdGlobalStatusAFDConfig Global Enable of LBD is done by admin or auto-fabric | scalar | Enumeration | .1.3.6.1.4.1.6486.801.1.2.1.82.1.1.8 |
| alaLbdVlanGlobalConfigTransmissionTimer This object is used to set the transmission timer for LBD
feature for VLAN globally. It is allowed to modify the timer at any
instance but the new timer value will be effect… | scalar | seconds Unsigned32 | .1.3.6.1.4.1.6486.801.1.2.1.82.1.1.9 |