alclnkaggAggActorSystemID
ALCATEL-ENT1-LAG-MIB ·
.1.3.6.1.4.1.6486.801.1.2.1.13.1.1.1.1.1.4
Object
A 6-octet read-write MAC address value used as a unique identifier for the System that contains this Aggregator. NOTE-From the perspective of the Link Aggregation mechanisms described in Clause , only a single combination of Actor's System ID and System Priority are considered, and no distinction is made between the values of these parameters for an Aggregator and the port(s) that are associated with it; i.e., the protocol is described in terms of the operation of aggregation within a single System. However, the managed. objects provided for the Aggregator and the port both allow management of these parameters. The result of this is to permit a single piece of equipment to be configured by management to contain more than one System from the point of view of the operation of Link Aggregation. This may be of particular use in the configuration of equipment that has limited aggregation capability (see ).
Context
- MIB
- ALCATEL-ENT1-LAG-MIB
- OID
.1.3.6.1.4.1.6486.801.1.2.1.13.1.1.1.1.1.4- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- alclnkaggAggEntry
- Table
- alclnkaggAggTable
- Siblings
- 24
Values & Constraints
Type Constraints
range: 6
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| alclnkaggAggIndex The unique identifier allocated to this Aggregator by the local
System.
This attribute identifies an Aggregator instance among the subordinate
managed objects of the containing ob… | column | IF-MIBInterfaceIndex | .1.3.6.1.4.1.6486.801.1.2.1.13.1.1.1.1.1.1 |
| alclnkaggAggPartnerOperKey The current operational value of the Key for the
Aggregator's current protocol Partner. This is
a 16-bit read- write value. If the aggregation is manually
configured, this Key val… | column | IEEE8023-LAG-MIBLacpKey | .1.3.6.1.4.1.6486.801.1.2.1.13.1.1.1.1.1.10 |
| alclnkaggAggSize Maximum number of links that could be attached to this
aggregator, This nominator is mandatory and is a required
field in order to create a row in this table | column | Integer32 | .1.3.6.1.4.1.6486.801.1.2.1.13.1.1.1.1.1.11 |
| alclnkaggAggNumber Aggreagtor number reference the aggregate dedicated from the
ifindex at the creation | column | Integer32 | .1.3.6.1.4.1.6486.801.1.2.1.13.1.1.1.1.1.12 |
| alclnkaggAggDescr Description is a human readable string which describes of
the type of aggregator object OMNICHANNEL / LACP etc | column | OctetString | .1.3.6.1.4.1.6486.801.1.2.1.13.1.1.1.1.1.13 |
| alclnkaggAggName Name of the aggregator is human readable string manually given by
the operator | column | OctetString | .1.3.6.1.4.1.6486.801.1.2.1.13.1.1.1.1.1.14 |
| alclnkaggAggLacpType Aggreagtor set with LACP protocol or not (case of Omnichannel)
mandatory at the creation of the aggregator, cannot be modified
later | column | LacpType | .1.3.6.1.4.1.6486.801.1.2.1.13.1.1.1.1.1.15 |
| alclnkaggAggAdminState status assigned by the admnistrator. The activation of the aggregator
is managed by this nominator | column | Enumeration | .1.3.6.1.4.1.6486.801.1.2.1.13.1.1.1.1.1.16 |
| alclnkaggAggOperState Operational status of the aggregator with proprietary values
operational state from iftable corresponds to UP state | column | Enumeration | .1.3.6.1.4.1.6486.801.1.2.1.13.1.1.1.1.1.17 |
| alclnkaggAggNbrSelectedPorts The number of ports selected at the momemt . | column | Integer32 | .1.3.6.1.4.1.6486.801.1.2.1.13.1.1.1.1.1.18 |
| alclnkaggAggNbrAttachedPorts The number of ports attached at the momemt . | column | Integer32 | .1.3.6.1.4.1.6486.801.1.2.1.13.1.1.1.1.1.19 |
| alclnkaggAggMACAddress A 6-octet read-only value carrying the individual
MAC address assigned to the Aggregator. | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.6486.801.1.2.1.13.1.1.1.1.1.2 |
| alclnkaggAggPrimaryPortIndex the ifindex of the primary port in the aggregator used to send
BPDUs and flooding frames Zeo indicates no primary port is
available . | column | IF-MIBInterfaceIndex | .1.3.6.1.4.1.6486.801.1.2.1.13.1.1.1.1.1.20 |
| alclnkaggAggPrimaryPortPosition the port index number in the aggregator used to send
BPDUs and flooding frames . | column | Integer32 | .1.3.6.1.4.1.6486.801.1.2.1.13.1.1.1.1.1.21 |
| alclnkaggAggRowStatus This object is the RowStatus (locking flag) for creating or
deleting aggregator objects. alclnkaggAggSize, alclnkaggAggLacpType
and must be supplied in the request to create a ro… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.6486.801.1.2.1.13.1.1.1.1.1.22 |
| alclnkaggAggMcLagType Aggregator set with MultiChassis mode or not
mandatory at the creation of the aggregator, cannot be modified
later | column | McLagType | .1.3.6.1.4.1.6486.801.1.2.1.13.1.1.1.1.1.23 |
| alclnkaggAggPortSelectionHash Port Selection Criteria used to hash one port of the aggregate
for a given traffic flow | column | Enumeration | .1.3.6.1.4.1.6486.801.1.2.1.13.1.1.1.1.1.24 |
| alclnkaggAggWTRTimer This sets the WTR timer value in minutes for an aggregate. The default value is 0 minute.
The Default means the WTR is Disabled.
When an link comes up,
If there is no WTR enable… | column | minutes Integer32 | .1.3.6.1.4.1.6486.801.1.2.1.13.1.1.1.1.1.25 |
| alclnkaggAggActorSystemPriority A 2-octet read-write value indicating the priority value
associated with the Actor's System ID. | column | Integer32 | .1.3.6.1.4.1.6486.801.1.2.1.13.1.1.1.1.1.3 |
| alclnkaggAggPartnerAdminKey The current Administrative value of the Key accepted for the
Aggregator's current protocol Partner. Optional this is
a 16-bit read-write value. If the aggregation is manually
conf… | column | IEEE8023-LAG-MIBLacpKey | .1.3.6.1.4.1.6486.801.1.2.1.13.1.1.1.1.1.5 |
| alclnkaggAggActorAdminKey The current administrative value of the Key for the Aggregator.
The administrative Key value may differ from the operational
Key value for the reasons discussed in . This is a 16-… | column | IEEE8023-LAG-MIBLacpKey | .1.3.6.1.4.1.6486.801.1.2.1.13.1.1.1.1.1.6 |
| alclnkaggAggActorOperKey The current operational value of the Key for the Aggregator.
The administrative Key value may differ from the operational
Key value for the reasons discussed in .
This is a 16-bit… | column | IEEE8023-LAG-MIBLacpKey | .1.3.6.1.4.1.6486.801.1.2.1.13.1.1.1.1.1.7 |
| alclnkaggAggPartnerSystemID A 6-octet read-write MAC address value consisting
of the unique identifier for the current protocol Partner of
this Aggregator. A value of zero indicates that there is no
known Pa… | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.6486.801.1.2.1.13.1.1.1.1.1.8 |
| alclnkaggAggPartnerSystemPriority A 2-octet read-only value that indicates the priority
value associated with the Partner's System ID. If the
aggregation is manually configured, this System Priority value
will be … | column | Integer32 | .1.3.6.1.4.1.6486.801.1.2.1.13.1.1.1.1.1.9 |