alcatelIND1IsisSpbSysSetOverload
ALCATEL-ENT1-ISIS-SPB-MIB ·
.1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.1.12
Object
Administratively set the overload bit. The overload bit will continue to be set if the implementation runs out of memory, independent of this variable.
Context
- MIB
- ALCATEL-ENT1-ISIS-SPB-MIB
- OID
.1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.1.12- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- alcatelIND1IsisSpbSys
- Siblings
- 20
Values & Constraints
Type Values
1 | true |
2 | false |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| alcatelIND1IsisSpbSysControlBvlan The vlan tag applied to ISIS-SPB frames. | scalar | Q-BRIDGE-MIBVlanId | .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.1.1 |
| alcatelIND1IsisSpbmSysMode Indication of supporting SPBM mode
auto(=1)/manual(=2)
auto => enable SPBM mode and auto allocate SPsourceID.
manual => enable SPBM mode and manually assign SPsourceID.
The defaul… | scalar | AlcatelIND1IsisSpbMode | .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.1.10 |
| alcatelIND1IsisSpbSysDigestConvention The Agreement Digest convention setting
off(=1)/loopFreeBoth(=2)/loopFreeMcastOnly(=3)
off => disable agreement digest checking in hellos
loopFreeBoth => block unsafe group and in… | scalar | AlcatelIND1IsisSpbDigestConvention | .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.1.11 |
| alcatelIND1IsisSpbSysOverloadTimeout The value of alcatelIND1IsisSpbSysOverloadTimeout is
the amount of time, in seconds, the router operates
in the overload state before attempting to
reestablish normal operations. … | scalar | seconds Unsigned32 | .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.1.13 |
| alcatelIND1IsisSpbSysOverloadOnBoot The value of alcatelIND1IsisSpbSysOverloadOnBoot
specifies if the router should be in overload state
right after the boot up process. If the
alcatelIND1IsisSpbSysOverloadOnBoot i… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.1.14 |
| alcatelIND1IsisSpbSysOverloadOnBootTimeout The value of
alcatelIND1IsisSpbSysOverloadOnBootTimeout is the
amount of time, in seconds for which the router
operates in the overload state before attempting to
reestablish norm… | scalar | seconds Unsigned32 | .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.1.15 |
| alcatelIND1IsisSpbSysOverloadStatus Indicates whether or not this isis-spb instance is in
overload state. When has the value 'notInOverload',
the IS-IS level is normal state. When the value is
'dynamic', the level… | scalar | Enumeration | .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.1.16 |
| alcatelIND1IsisSpbSysLastEnabledTime Contains the sysUpTime value when
alcatelIND1IsisSpbSysAdminState was last set to
enabled (1) to run the IS-IS protocol. | scalar | OctetString | .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.1.17 |
| alcatelIND1isisSpbSysLastSpfRun Contains the sysUpTime value when the last
SPF run was performed for this instance of the IS-IS protocol. | scalar | OctetString | .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.1.18 |
| alcatelIND1IsisSpbSysNumLSPs Specifies the number of LSPs in the database. | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.1.19 |
| alcatelIND1IsisSpbSysAdminState Controls the operational state of the ISIS-SPB protocol.
Default value is disable(2). | scalar | Enumeration | .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.1.2 |
| alcatelIND1IsisSpbSysLastEnabledTimeStamp Contains the sysUpTime value when
alcatelIND1IsisSpbSysAdminState was last set to
enabled (1) to run the IS-IS protocol. | scalar | SNMPv2-TCTimeStamp | .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.1.20 |
| alcatelIND1isisSpbSysLastSpfRunTimeStamp Contains the sysUpTime value when the last
SPF run was performed for this instance of the IS-IS protocol. | scalar | SNMPv2-TCTimeStamp | .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.1.21 |
| alcatelIND1IsisSpbSysAreaAddress The three byte IS-IS Area Address to join. Normally
SPB will use area 00-00-00 however if SPB is being
used in conjunction with IPV4/V6 it may operate
using the IS-IS area address… | scalar | AlcatelIND1IsisSpbAreaAddress | .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.1.3 |
| alcatelIND1IsisSpbSysId SYS ID used for all SPB instances on this bridge.
A six byte network wide unique identifier.
cf. ieee8021SpbSysId | scalar | SNMPv2-TCMacAddress | .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.1.4 |
| alcatelIND1IsisSpbSysControlAddr Group MAC that the ISIS control plane will use. SPB may
use a number of different addresses for SPB Hello and
LSP exchange. Section 27.2, 8.13.1.5 and Table 8-13 covers
the differ… | scalar | SNMPv2-TCMacAddress | .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.1.5 |
| alcatelIND1IsisSpbSysName Name to be used to refer to this SPB bridge. This is advertised
in IS-IS and used for management.
cf. ieee8021SpbSysName | scalar | AlcatelIND1IsisSpbSystemName | .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.1.6 |
| alcatelIND1IsisSpbSysBridgePriority This is a 16 bit quantity which ranks this SPB Bridge
relative to others when breaking ties. This priority
is the high 16 bits of the Bridge Identifier. Its impact
depends on the … | scalar | AlcatelIND1IsisSpbBridgePriority | .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.1.7 |
| alcatelIND1IsisSpbmSysSPSourceId The Shortest Path Source Identifier.
It is the high order 3 bytes for Group Address DA from this
bridge.
Note that only the 20 bits not including the top 4 bits are
the SPSourceID… | scalar | AlcatelIND1IsisSpbmSPsourceId | .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.1.8 |
| alcatelIND1IsisSpbvSysMode Indication of supporting SPBV mode
auto(=1)/manual(=2)
auto => enable SPBV mode and auto allocate SPVIDs.
manual => enable SPBV mode and manually assign SPVIDs.
The default is aut… | scalar | AlcatelIND1IsisSpbMode | .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.1.9 |