alcatelIND1IsisSpbSysControlAddr

ALCATEL-ENT1-ISIS-SPB-MIB · .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.1.5
MIB view Table view

Object

scalar r/w SNMPv2-TCMacAddress 
Group MAC that the ISIS control plane will use. SPB may
use a number of different addresses for SPB Hello and
LSP exchange. Section 27.2, 8.13.1.5 and Table 8-13 covers
the different choices. The choices are as follows:
01-80-C2-00-00-14 = All Level 1 Intermediate Systems
01-80-C2-00-00-15 = All Level 2 Intermediate Systems
09-00-2B-00-00-05 = All Intermediate Systems.
01-80-xx-xx-xx-xx = All Provider Bridge Intermediate Systems.
01-80-yy-yy-yy-yy = All Customer Bridge Intermediate Systems.
This object is persistent.
cf. ieee8021SpbSysControlAddr

Context

MIB
ALCATEL-ENT1-ISIS-SPB-MIB
OID
.1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.1.5
Type
scalar
Access
readwrite
Status
current
Parent
alcatelIND1IsisSpbSys
Siblings
20

Syntax

SNMPv2-TCMacAddress
Source
SNMPv2-TCMacAddress
Base type
OctetString

Values & Constraints

Type Constraints
range: 6

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
alcatelIND1IsisSpbSysControlBvlan
The vlan tag applied to ISIS-SPB frames.
scalarQ-BRIDGE-MIBVlanId.1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.1.1
alcatelIND1IsisSpbmSysMode
Indication of supporting SPBM mode auto(=1)/manual(=2) auto => enable SPBM mode and auto allocate SPsourceID. manual => enable SPBM mode and manually assign SPsourceID. The defaul…
scalarAlcatelIND1IsisSpbMode.1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.1.10
alcatelIND1IsisSpbSysDigestConvention
The Agreement Digest convention setting off(=1)/loopFreeBoth(=2)/loopFreeMcastOnly(=3) off => disable agreement digest checking in hellos loopFreeBoth => block unsafe group and in…
scalarAlcatelIND1IsisSpbDigestConvention.1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.1.11
alcatelIND1IsisSpbSysSetOverload
Administratively set the overload bit. The overload bit will continue to be set if the implementation runs out of memory, independent of this variable.
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.1.12
alcatelIND1IsisSpbSysOverloadTimeout
The value of alcatelIND1IsisSpbSysOverloadTimeout is the amount of time, in seconds, the router operates in the overload state before attempting to reestablish normal operations. …
scalarseconds Unsigned32.1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.1.13
alcatelIND1IsisSpbSysOverloadOnBoot
The value of alcatelIND1IsisSpbSysOverloadOnBoot specifies if the router should be in overload state right after the boot up process. If the alcatelIND1IsisSpbSysOverloadOnBoot i…
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.1.14
alcatelIND1IsisSpbSysOverloadOnBootTimeout
The value of alcatelIND1IsisSpbSysOverloadOnBootTimeout is the amount of time, in seconds for which the router operates in the overload state before attempting to reestablish norm…
scalarseconds Unsigned32.1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.1.15
alcatelIND1IsisSpbSysOverloadStatus
Indicates whether or not this isis-spb instance is in overload state. When has the value 'notInOverload', the IS-IS level is normal state. When the value is 'dynamic', the level…
scalarEnumeration.1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.1.16
alcatelIND1IsisSpbSysLastEnabledTime
Contains the sysUpTime value when alcatelIND1IsisSpbSysAdminState was last set to enabled (1) to run the IS-IS protocol.
scalarOctetString.1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.1.17
alcatelIND1isisSpbSysLastSpfRun
Contains the sysUpTime value when the last SPF run was performed for this instance of the IS-IS protocol.
scalarOctetString.1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.1.18
alcatelIND1IsisSpbSysNumLSPs
Specifies the number of LSPs in the database.
scalarSNMPv2-SMIUnsigned32.1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.1.19
alcatelIND1IsisSpbSysAdminState
Controls the operational state of the ISIS-SPB protocol. Default value is disable(2).
scalarEnumeration.1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.1.2
alcatelIND1IsisSpbSysLastEnabledTimeStamp
Contains the sysUpTime value when alcatelIND1IsisSpbSysAdminState was last set to enabled (1) to run the IS-IS protocol.
scalarSNMPv2-TCTimeStamp.1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.1.20
alcatelIND1isisSpbSysLastSpfRunTimeStamp
Contains the sysUpTime value when the last SPF run was performed for this instance of the IS-IS protocol.
scalarSNMPv2-TCTimeStamp.1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.1.21
alcatelIND1IsisSpbSysAreaAddress
The three byte IS-IS Area Address to join. Normally SPB will use area 00-00-00 however if SPB is being used in conjunction with IPV4/V6 it may operate using the IS-IS area address…
scalarAlcatelIND1IsisSpbAreaAddress.1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.1.3
alcatelIND1IsisSpbSysId
SYS ID used for all SPB instances on this bridge. A six byte network wide unique identifier. cf. ieee8021SpbSysId
scalarSNMPv2-TCMacAddress.1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.1.4
alcatelIND1IsisSpbSysName
Name to be used to refer to this SPB bridge. This is advertised in IS-IS and used for management. cf. ieee8021SpbSysName
scalarAlcatelIND1IsisSpbSystemName.1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.1.6
alcatelIND1IsisSpbSysBridgePriority
This is a 16 bit quantity which ranks this SPB Bridge relative to others when breaking ties. This priority is the high 16 bits of the Bridge Identifier. Its impact depends on the …
scalarAlcatelIND1IsisSpbBridgePriority.1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.1.7
alcatelIND1IsisSpbmSysSPSourceId
The Shortest Path Source Identifier. It is the high order 3 bytes for Group Address DA from this bridge. Note that only the 20 bits not including the top 4 bits are the SPSourceID…
scalarAlcatelIND1IsisSpbmSPsourceId.1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.1.8
alcatelIND1IsisSpbvSysMode
Indication of supporting SPBV mode auto(=1)/manual(=2) auto => enable SPBV mode and auto allocate SPVIDs. manual => enable SPBV mode and manually assign SPVIDs. The default is aut…
scalarAlcatelIND1IsisSpbMode.1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.1.9