alcatelIND1IsisSpbLSPChecksum
ALCATEL-ENT1-ISIS-SPB-MIB ·
.1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.9.1.4
Object
column
SNMPv2-SMIInteger32
The checksum of contents of LSP from the SourceID field in the LSP till the end. The checksum is computed using the Fletcher checksum algorithm.
Context
- MIB
- ALCATEL-ENT1-ISIS-SPB-MIB
- OID
.1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.9.1.4- Type
- column
- Access
- readonly
- Status
- current
- Parent
- alcatelIND1IsisSpbLSPEntry
- Table
- alcatelIND1IsisSpbLSPTable
- Siblings
- 13
Syntax
SNMPv2-SMIInteger32
- Source
- SNMPv2-SMIInteger32
- Base type
Integer32
Values & Constraints
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| alcatelIND1IsisSpbLSPTopIx The ISIS Topology Index identifier to which this
instance belongs. Each Topology Index defines logical topology
and is used to enable multiple SPB instances within several
ISIS in… | column | AlcatelIND1IsisSpbMTID | .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.9.1.1 |
| alcatelIND1IsisSpbLSPSysIdLen The length of the system-id as used by the
originator. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.9.1.10 |
| alcatelIND1IsisSpbLSPAttributes Attributes associated with the LSP. These include the
attached bit, overload bit, IS type of the system
originating the LSP and the partition repair
capability. The attached bit a… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.9.1.11 |
| alcatelIND1IsisSpbLSPUsedLen The used length for the LSP. For an LSP that is not
self originated, the used length is always equal to
alloc len. For self originated LSPs, the used length
is less than or equal … | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.9.1.12 |
| alcatelIND1IsisSpbLSPAllocLen The length allocated for the LSP to be stored. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.9.1.13 |
| alcatelIND1IsisSpbLSPBuff The LSP as it exists in the LSP database. | column | OctetString | .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.9.1.14 |
| alcatelIND1IsisSpbLSPId The LSP Id. The format is 6 octets of ajacency
system-id followed by 1 octet LanId and 1 octet LSP
Number. | column | OctetString | .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.9.1.2 |
| alcatelIND1IsisSpbLSPSeq The sequence number of an LSP. The sequence number is
a four byte quantity that represents the version of
an LSP. The higher the sequence number, the more up
to date the informati… | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.9.1.3 |
| alcatelIND1IsisSpbLSPLifetimeRemain Remaining lifetime of this LSP. This is a
decrementing counter that decrements in seconds.
When the remaining lifetime becomes zero, the
contents of the LSP should not be consider… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.9.1.5 |
| alcatelIND1IsisSpbLSPVersion The version of the ISIS protocol that generated the
LSP. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.9.1.6 |
| alcatelIND1IsisSpbLSPPktType Packet type for instance Hello PDUs, LSPs, CSNPs or
PSNPs. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.9.1.7 |
| alcatelIND1IsisSpbLSPPktVersion The version of the ISIS protocol that generated the
Packet. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.9.1.8 |
| alcatelIND1IsisSpbLSPMaxArea Maximum number of areas supported by the originator
of the LSP. A value of 0 indicates a default of 3
areas. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.9.1.9 |