alcatelIND1IsisSpbLSPAttributes

ALCATEL-ENT1-ISIS-SPB-MIB · .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.9.1.11
MIB view Table view

Object

column SNMPv2-SMIInteger32 
Attributes associated with the LSP. These include the
attached bit, overload bit, IS type of the system
originating the LSP and the partition repair
capability. The attached bit and the overload bit are
of significance only when present in the LSP numbered
zero and should be ignored on receipt in any other
LSP.

Context

MIB
ALCATEL-ENT1-ISIS-SPB-MIB
OID
.1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.9.1.11
Type
column
Access
readonly
Status
current
Parent
alcatelIND1IsisSpbLSPEntry
Table
alcatelIND1IsisSpbLSPTable
Siblings
13

Syntax

SNMPv2-SMIInteger32
Source
SNMPv2-SMIInteger32
Base type
Integer32

Values & Constraints

Type Constraints
range: -2147483648..2147483647

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
alcatelIND1IsisSpbLSPTopIx
The ISIS Topology Index identifier to which this instance belongs. Each Topology Index defines logical topology and is used to enable multiple SPB instances within several ISIS in…
columnAlcatelIND1IsisSpbMTID.1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.9.1.1
alcatelIND1IsisSpbLSPSysIdLen
The length of the system-id as used by the originator.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.9.1.10
alcatelIND1IsisSpbLSPUsedLen
The used length for the LSP. For an LSP that is not self originated, the used length is always equal to alloc len. For self originated LSPs, the used length is less than or equal …
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.9.1.12
alcatelIND1IsisSpbLSPAllocLen
The length allocated for the LSP to be stored.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.9.1.13
alcatelIND1IsisSpbLSPBuff
The LSP as it exists in the LSP database.
columnOctetString.1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.9.1.14
alcatelIND1IsisSpbLSPId
The LSP Id. The format is 6 octets of ajacency system-id followed by 1 octet LanId and 1 octet LSP Number.
columnOctetString.1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.9.1.2
alcatelIND1IsisSpbLSPSeq
The sequence number of an LSP. The sequence number is a four byte quantity that represents the version of an LSP. The higher the sequence number, the more up to date the informati…
columnSNMPv2-SMICounter32.1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.9.1.3
alcatelIND1IsisSpbLSPChecksum
The checksum of contents of LSP from the SourceID field in the LSP till the end. The checksum is computed using the Fletcher checksum algorithm.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.9.1.4
alcatelIND1IsisSpbLSPLifetimeRemain
Remaining lifetime of this LSP. This is a decrementing counter that decrements in seconds. When the remaining lifetime becomes zero, the contents of the LSP should not be consider…
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.9.1.5
alcatelIND1IsisSpbLSPVersion
The version of the ISIS protocol that generated the LSP.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.9.1.6
alcatelIND1IsisSpbLSPPktType
Packet type for instance Hello PDUs, LSPs, CSNPs or PSNPs.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.9.1.7
alcatelIND1IsisSpbLSPPktVersion
The version of the ISIS protocol that generated the Packet.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.9.1.8
alcatelIND1IsisSpbLSPMaxArea
Maximum number of areas supported by the originator of the LSP. A value of 0 indicates a default of 3 areas.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.9.1.9