vRtrIsisSpfSecondWait

ALCATEL-ENT1-ISIS-MIB · .1.3.6.1.4.1.6486.801.1.2.1.10.14.1.10.2.1.1.21
MIB view Table view

Object

column r/w milliseconds Unsigned32 
The value of vRtrIsisSpfInitialWait defines the hold time
between the first and second SPF calculation (in milliseconds).
              
Subsequent SPF runs will occur at exponentially increasing
intervals of spf-second-wait i.e. if spf-second-wait is 1000,
then the next SPF will run after 2000 msec, the next one at
4000 msec etc until it is capped off at spf-wait value.
              
The SPF interval will stay at spf-wait value until there are no
more SPF runs scheduled in that interval. After a full interval
without any SPF runs, the SPF interval will drop back to
spf-initial-wait.

Context

MIB
ALCATEL-ENT1-ISIS-MIB
OID
.1.3.6.1.4.1.6486.801.1.2.1.10.14.1.10.2.1.1.21
Type
column
Access
readwrite
Status
current
Units
milliseconds
Parent
vRtrIsisEntry
Table
vRtrIsisTable
Siblings
30

Syntax

milliseconds Unsigned32

Values & Constraints

Object Constraints
range: 1-100000

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
vRtrIsisLastEnabledTime
The vRtrIsisLastEnabledTime variable contains the sysUpTime value when vRtrIsisAdminState was last set to enabled (1) to run the IS-IS protocol in the router.
columnOctetString.1.3.6.1.4.1.6486.801.1.2.1.10.14.1.10.2.1.1.1
vRtrIsisLspLifetime
The value of vRtrIsisLspLifetime specifies how long, in seconds, a given LSP is considered valid without the originating router having refreshed the LSP. The actual LSP refresh t…
columnseconds Unsigned32.1.3.6.1.4.1.6486.801.1.2.1.10.14.1.10.2.1.1.10
vRtrIsisOverloadTimeout
The value of vRtrIsisOverloadTimeout is the amount of time, in seconds, the router operates in the overload state before attempting to reestablish normal operations. While in ove…
columnseconds Unsigned32.1.3.6.1.4.1.6486.801.1.2.1.10.14.1.10.2.1.1.11
vRtrIsisOperState
vRtrIsisOperState indicates the current operating state of this IS-IS protocol instance on this router.
columnTmnxOperState.1.3.6.1.4.1.6486.801.1.2.1.10.14.1.10.2.1.1.12
vRtrIsisShortCuts
When the value of vRtrIsisShortCuts is 'true', MPLS label switched paths of LSPs are used as next hops whenever BGP need to resolve the next hop within the IS-IS domain. When the…
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.6486.801.1.2.1.10.14.1.10.2.1.1.13
vRtrIsisSpfHoldTime
Time interval at which SPF is run.
columnseconds Integer32.1.3.6.1.4.1.6486.801.1.2.1.10.14.1.10.2.1.1.14
vRtrIsisLastSpfRun
The vRtrIsisLastSpfRun contains the sysUpTime value when the last SPF run was performed for this instance of the IS-IS protocol in the router.
columnOctetString.1.3.6.1.4.1.6486.801.1.2.1.10.14.1.10.2.1.1.15
vRtrIsisGracefulRestart
The value of vRtrIsisGracefulRestart specifies whether the graceful restart is enabled or disabled for this instance of IS-IS on the router.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.6486.801.1.2.1.10.14.1.10.2.1.1.16
vRtrIsisOverloadOnBoot
The value of vRtrIsisOverloadOnBoot specifies if the router should be in overload state right after the boot up process. If the vRtrIsisOverloadOnBoot is set to 'enabled' the over…
columnEnumeration.1.3.6.1.4.1.6486.801.1.2.1.10.14.1.10.2.1.1.17
vRtrIsisOverloadOnBootTimeout
The value of vRtrIsisOverloadOnBootTimeout is the amount of time, in seconds for which the router operates in the overload state before attempting to reestablish normal operations…
columnseconds Unsigned32.1.3.6.1.4.1.6486.801.1.2.1.10.14.1.10.2.1.1.18
vRtrIsisSpfWait deprecated
The value of vRtrIsisSpfWait defines the Maximum interval between two consecutive spf calculations in seconds. This object has been replaced by vRtrIsisSpfMaxWait, which has units…
columnseconds Unsigned32.1.3.6.1.4.1.6486.801.1.2.1.10.14.1.10.2.1.1.19
vRtrIsisAuthKey
vRtrIsisAuthKey is the authentication key string used to verify the authenticity of packets sent by neighboring routers on an IS-IS interface. For authentication to succeed both …
columnOctetString.1.3.6.1.4.1.6486.801.1.2.1.10.14.1.10.2.1.1.2
vRtrIsisSpfInitialWait
The value of vRtrIsisSpfInitialWait defines the initial SPF calculation delay (in milliseconds) after a topology change.
columnmilliseconds Unsigned32.1.3.6.1.4.1.6486.801.1.2.1.10.14.1.10.2.1.1.20
vRtrIsisLspMaxWait
The value of vRtrIsisLspWait dDefines the maximum interval (in seconds) between two consecutive ocurrences of an LSP being generated.
columnseconds Unsigned32.1.3.6.1.4.1.6486.801.1.2.1.10.14.1.10.2.1.1.22
vRtrIsisLspInitialWait
The value of vRtrIsisLspInitialWait defines the initial LSP generation delay (in seconds).
columnseconds Unsigned32.1.3.6.1.4.1.6486.801.1.2.1.10.14.1.10.2.1.1.23
vRtrIsisLspSecondWait
The value of vRtrIsisLspInitialWait defines the hold time between the first and second LSP generation (in seconds).
columnseconds Unsigned32.1.3.6.1.4.1.6486.801.1.2.1.10.14.1.10.2.1.1.24
vRtrIsisCsnpAuthentication
When vRtrIsisCsnpAuthentication has a value of 'true', enables authentication of individual ISIS packets of CSNP type. The value of 'false' When vRtrIsisCsnpAuthent…
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.6486.801.1.2.1.10.14.1.10.2.1.1.25
vRtrIsisHelloAuthentication
When vRtrIsisHelloAuthentication has a value of 'true', enables authentication of individual ISIS packets of HELLO type. The value of 'false' When vRtrIsisHelloAuth…
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.6486.801.1.2.1.10.14.1.10.2.1.1.26
vRtrIsisPsnpAuthentication
When vRtrIsisPsnpAuthentication has a value of 'true', enables authentication of individual ISIS packets of PSNP type. The value of 'false' When vRtrIsisPsnpAuthent…
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.6486.801.1.2.1.10.14.1.10.2.1.1.27
vRtrIsisGRRestartDuration
The value of vRtrIsisGRRestartDuration specifies the maximum amount of time, in seconds, needed to re-establish ISIS adjacencies in all areas.
columnseconds Unsigned32.1.3.6.1.4.1.6486.801.1.2.1.10.14.1.10.2.1.1.28
vRtrIsisGRHelperMode
The value of vRtrIsisGRHelperMode specifies whether the graceful restart helper mode is enabled or disabled for this instance of IS-IS on the router. vRtrIsisGRHelperMode is valid…
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.6486.801.1.2.1.10.14.1.10.2.1.1.29
vRtrIsisAuthType
The value of vRtrIsisAuthType indicates the method of authentication used to verify the authenticity of packets sent by neighboring routers on an IS-IS interface. For authenticat…
columnEnumeration.1.3.6.1.4.1.6486.801.1.2.1.10.14.1.10.2.1.1.3
vRtrIsisStrictAdjacencyCheck
The value of vRtrIsisStrictAdjacencyCheck specifies whether an ISIS adjacency can be formed when two routers do not run the same IP versions. When the value is 'tru…
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.6486.801.1.2.1.10.14.1.10.2.1.1.30
vRtrIsisSpfMaxWait
The value of vRtrIsisSpfMaxWait defines the Maximum interval between two consecutive spf calculations in milliseconds.
columnmilliseconds Unsigned32.1.3.6.1.4.1.6486.801.1.2.1.10.14.1.10.2.1.1.31
vRtrIsisActivateIPv4
The value of vRtrIsisActivateIPv4 activates the IPv4 routing in ISIS. This will be enabled by default.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.6486.801.1.2.1.10.14.1.10.2.1.1.32
vRtrIsisActivateIPv6
The value of vRtrIsisActivateIPv6 activates the IPv6 routing in ISIS. This will be enabled by default.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.6486.801.1.2.1.10.14.1.10.2.1.1.33
vRtrIsisMTEnabled
Indicates whether M-ISIS capability, as IETF RFC 5120 is enabled (or not) on this ISIS system.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.6486.801.1.2.1.10.14.1.10.2.1.1.34
vRtrIsisBfdStatus
Indicates whether BFD is enabled (or not) on this ISIS system.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.6486.801.1.2.1.10.14.1.10.2.1.1.35
vRtrIsisBfdAllVlanStatus
Indicates whether BFD is enabled (or not) for all VLANs on this ISIS system.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.6486.801.1.2.1.10.14.1.10.2.1.1.36
vRtrIsisAuthCheck
When vRtrIsisAuthCheck has a value of 'true', all IS-IS protocol packets that have a mismatch on either the authentication type, specified by the value of vRtrIsisAuthType, or the…
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.6486.801.1.2.1.10.14.1.10.2.1.1.4