alaIPv6NeighborState
ALCATEL-ENT1-IPV6-MIB ·
.1.3.6.1.4.1.6486.801.1.2.1.29.1.1.6.1.6
Object
column
deprecated
Enumeration
The Neighbor Unreachability Detection state for the interface when the address mapping in this entry is used.
Context
- MIB
- ALCATEL-ENT1-IPV6-MIB
- OID
.1.3.6.1.4.1.6486.801.1.2.1.29.1.1.6.1.6- Type
- column
- Access
- readonly
- Status
- deprecated
- Parent
- alaIPv6NeighborEntry
- Table
- alaIPv6NeighborTable
- Siblings
- 11
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | reachable |
2 | stale |
3 | delay |
4 | probe |
5 | invalid |
6 | unknown |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| alaIPv6NeighborNetAddress The neighbor's IPv6 Address. | column | IPV6-TCIpv6Address | .1.3.6.1.4.1.6486.801.1.2.1.29.1.1.6.1.1 |
| alaIPv6NeighborReachability The reachability status of the neighbor. | column | Enumeration | .1.3.6.1.4.1.6486.801.1.2.1.29.1.1.6.1.10 |
| alaIPv6NeighborChassis deprecated On a multi-chasis system, the chassis used to reach the neighbor.
On a single-chassis system this value is always 0. On read, a
value of zero may indicate that the chassis is not… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6486.801.1.2.1.29.1.1.6.1.11 |
| alaIPv6NeighborPortIfIndex The ifIndex of the physical port or link aggregation used to reach
the neighbor. When creating a static neighbor the port ifIndex must
be specified. On read, a value of zero i… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6486.801.1.2.1.29.1.1.6.1.12 |
| alaIPv6NeighborPhysAddress The neighbor's media-dependent `physical' address. | column | SNMPv2-TCPhysAddress | .1.3.6.1.4.1.6486.801.1.2.1.29.1.1.6.1.2 |
| alaIPv6NeighborSlot deprecated The slot used to reach the neighbor. When creating a static neighbor
the slot must be specified. On read, a value of zero indicates
the slot is not known/not applicable.
… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6486.801.1.2.1.29.1.1.6.1.3 |
| alaIPv6NeighborPort deprecated The port used to reach the neighbor. When creating a static neighbor
the port must be specified. On read, a value of zero indicates the
port is not known/not applicable.
… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6486.801.1.2.1.29.1.1.6.1.4 |
| alaIPv6NeighborType The type of the mapping. The 'dynamic(2)' type
indicates that the IPv6 address to physical
addresses mapping has been dynamically
resolved using the IPv6 Neighbor Discovery
protoc… | column | Enumeration | .1.3.6.1.4.1.6486.801.1.2.1.29.1.1.6.1.5 |
| alaIPv6NeighborLastUpdated The value of sysUpTime at the time this entry
was last updated. If this entry was updated prior
to the last re-initialization of the local network
management subsystem, then this… | column | SNMPv2-TCTimeStamp | .1.3.6.1.4.1.6486.801.1.2.1.29.1.1.6.1.7 |
| alaIPv6NeighborRowStatus Used to control the addition and removal of static
entries in the neighbor table. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.6486.801.1.2.1.29.1.1.6.1.8 |
| alaIPv6NeighborLifetime The remaining time the neighbor will stay in its current
state. External events may cause a state change before
the expiry of this lifetime. A value of zero indicates
the neighb… | column | seconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6486.801.1.2.1.29.1.1.6.1.9 |