alaCfmMepOWDTRMepIdentifier
ALCATEL-ENT1-ETHERNET-OAM-MIB ·
.1.3.6.1.4.1.6486.801.1.2.1.40.1.1.2.1.1.3
Object
Specifies the Mep-Id assigned to the Remote MEP.
Context
- MIB
- ALCATEL-ENT1-ETHERNET-OAM-MIB
- OID
.1.3.6.1.4.1.6486.801.1.2.1.40.1.1.2.1.1.3- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- alaCfmMepEntry
- Table
- alaCfmMepTable
- Siblings
- 9
Syntax
IEEE8021-CFM-MIBDot1agCfmMepId
- Source
- IEEE8021-CFM-MIBDot1agCfmMepId
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 1..8191
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| alaCfmMepClearStats Reset all statistics parameters corresponding to this MEP.
By default, this objects contains a zero value. | column | Enumeration | .1.3.6.1.4.1.6486.801.1.2.1.40.1.1.2.1.1.1 |
| alaCfmMepIfStatusTlv If set to true, Interface Status Tlv will be configured in CCM. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6486.801.1.2.1.40.1.1.2.1.1.10 |
| alaCfmMepOWDTMacAddress Specifies the MAC address used as a target for the
One-Way-Delay Test (OWDT).
Setting this object will trigger a One-Way-Delay test to the specified
MAC address. T… | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.6486.801.1.2.1.40.1.1.2.1.1.2 |
| alaCfmMepOWDTPriority Specifies the priority used in the generated test frame
for the One-Way-Delay test. | column | Unsigned32 | .1.3.6.1.4.1.6486.801.1.2.1.40.1.1.2.1.1.4 |
| alaCfmMepTWDTMacAddress Specifies the MAC address used as a target for the
Two-Way-Delay Test (TWDT).
Setting this object will trigger a Two-Way-Delay test to the specified
MAC address. T… | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.6486.801.1.2.1.40.1.1.2.1.1.5 |
| alaCfmMepTWDTRMepIdentifier Specifies the Mep-Id assigned to the Remote MEP. | column | IEEE8021-CFM-MIBDot1agCfmMepId | .1.3.6.1.4.1.6486.801.1.2.1.40.1.1.2.1.1.6 |
| alaCfmMepTWDTPriority Specifies the priority used in the generated test
frame for the Two-Way-Delay test. | column | Unsigned32 | .1.3.6.1.4.1.6486.801.1.2.1.40.1.1.2.1.1.7 |
| alaCfmMepRFPEnabled If set to true, Remote Fault Propagation will be enabled
on the MEP. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6486.801.1.2.1.40.1.1.2.1.1.8 |
| alaCfmMepPortStatusTlv If set to true, Port Status Tlv will be configured in CCM. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6486.801.1.2.1.40.1.1.2.1.1.9 |