alaDvmrpFlashUpdateInterval
ALCATEL-ENT1-DVMRP-MIB ·
.1.3.6.1.4.1.6486.801.1.2.1.10.7.1.1.1.3
Object
scalar
r/w
seconds Integer32
The minimum Flash Update Interval defines how often routing table change messages are sent to neighboring DVMRP routers. Since these messages are sent between the transmission of complete routing tables, the flash update interval value must be shorter than that of the route report interval.
Context
- MIB
- ALCATEL-ENT1-DVMRP-MIB
- OID
.1.3.6.1.4.1.6486.801.1.2.1.10.7.1.1.1.3- Type
- scalar
- Access
- readwrite
- Status
- current
- Units
- seconds
- Parent
- alaDvmrpGlobalConfig
- Siblings
- 13
Syntax
seconds Integer32
Values & Constraints
Object Constraints
range: 5-86400
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| alaDvmrpAdminStatus Administratively enables/disables the
DVMRP protocol on this router. | scalar | Enumeration | .1.3.6.1.4.1.6486.801.1.2.1.10.7.1.1.1.1 |
| alaDvmrpGraftRetransmission The Graft message Retransmission value defines
the duration of time that the router will wait
before retransmitting a graft message, if it has
not already received an acknowledgem… | scalar | seconds Integer32 | .1.3.6.1.4.1.6486.801.1.2.1.10.7.1.1.1.10 |
| alaDvmrpInitNbrAsSubord The value true(1) indicates neighbors, on initial discovery,
are considered subordinate. This means traffic may be resumed
slightly quicker on network disruptions. But, if the n… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6486.801.1.2.1.10.7.1.1.1.11 |
| alaDvmrpBfdStatus Enables/Disables Bfd for DVMRP Protocol. | scalar | Enumeration | .1.3.6.1.4.1.6486.801.1.2.1.10.7.1.1.1.12 |
| alaDvmrpBfdAllInterfaceStatus Enables/Disables Bfd for all DVMRP interfaces. | scalar | Enumeration | .1.3.6.1.4.1.6486.801.1.2.1.10.7.1.1.1.13 |
| alaDvmrpMbrOperStatus Whether MBR is currently enabled/disabled for DVMRP. | scalar | Enumeration | .1.3.6.1.4.1.6486.801.1.2.1.10.7.1.1.1.14 |
| alaDvmrpRouteReportInterval The Route Report Interval determines how often
a router will send its complete routing tables to
neighboring routers running DVMRP. | scalar | seconds Integer32 | .1.3.6.1.4.1.6486.801.1.2.1.10.7.1.1.1.2 |
| alaDvmrpNeighborTimeout The Neighbor Timeout value specifies how long, without
any activity from a neighboring DVMRP router, the
router will wait before assuming that the inactive
router is down. | scalar | seconds Integer32 | .1.3.6.1.4.1.6486.801.1.2.1.10.7.1.1.1.4 |
| alaDvmrpRouteExpirationTimeout The Route Expiration Timeout value specifies how
long the router will wait before aging out a route.
When this value expires, the route is advertised as
inactive until either it's… | scalar | seconds Integer32 | .1.3.6.1.4.1.6486.801.1.2.1.10.7.1.1.1.5 |
| alaDvmrpRouteHoldDown Specifies the time during which DVMRP routes are kept
in a hold-down state. A hold-down state refers to
the time that a route to an inactive network continues
to be advertised. | scalar | seconds Integer32 | .1.3.6.1.4.1.6486.801.1.2.1.10.7.1.1.1.6 |
| alaDvmrpNeighborProbeInterval The Neighbor Probe Interval value specifies how often
probes will be transmitted to those interfaces
with attached DVMRP neighbors. | scalar | seconds Integer32 | .1.3.6.1.4.1.6486.801.1.2.1.10.7.1.1.1.7 |
| alaDvmrpPruneLifetime The Prune Lifetime value defines the value
whereby a source-rooted multicast tree will be
pruned. | scalar | seconds Integer32 | .1.3.6.1.4.1.6486.801.1.2.1.10.7.1.1.1.8 |
| alaDvmrpPruneRetransmission The Prune Packet Retransmission value is the duration
of time that the router will wait, if it continues
to receive unwanted multicast traffic, before
retransmitting a prune messa… | scalar | seconds Integer32 | .1.3.6.1.4.1.6486.801.1.2.1.10.7.1.1.1.9 |