bsnAPName

AIRESPACE-WIRELESS-MIB · .1.3.6.1.4.1.14179.2.2.1.1.3

Object

column r/w OctetString

Name assigned to this AP. If an AP is not configured its
factory default name will be ap:<last three byte of 
MACAddress> eg. ap:af:12:be

Context

MIB: AIRESPACE-WIRELESS-MIB
OID: .1.3.6.1.4.1.14179.2.2.1.1.3
Type: column
Access: readwrite
Status: current
Parent: bsnAPEntry
Table: bsnAPTable
Siblings: 30

Syntax

OctetString

Values & Constraints

No enumerated values or constraints recorded.

Related Objects

Sibling Objects

Object	Type	Syntax	OID
bsnAPDot3MacAddress The MAC address of an AP.	column	SNMPv2-TCMacAddress	`.1.3.6.1.4.1.14179.2.2.1.1.1`
bsnAPPrimaryMwarName sysName of the Airespace Switch which is suppose to be the Primary MWAR(switch) of the AP with which AP should associate. This work when AP is not directly connected to Airespace …	column	OctetString	`.1.3.6.1.4.1.14179.2.2.1.1.10`
bsnAPReset Set this attribute to reset the AP. When it comes up it will try to associate with the Primary Switch if that is set, else it will associate with the Master Switch. Reading this a…	column	Enumeration	`.1.3.6.1.4.1.14179.2.2.1.1.11`
bsnAPStatsTimer Configures the time interval in secs after which bsnAPDot11Counters Stats is sent from AP to Switch. If not configured this value is 0 which means never send the stats.	column	Integer32	`.1.3.6.1.4.1.14179.2.2.1.1.12`
bsnAPPortNumber deprecated Port on the Switch on which this APs traffic is coming through.	column	Integer32	`.1.3.6.1.4.1.14179.2.2.1.1.13`
bsnAPModel AP Model	column	SNMPv2-TCDisplayString	`.1.3.6.1.4.1.14179.2.2.1.1.16`
bsnAPSerialNumber AP Serial Number.	column	SNMPv2-TCDisplayString	`.1.3.6.1.4.1.14179.2.2.1.1.17`
bsnAPClearConfig Set this attribute to clear AP configuration and reset it to factory defaults. Reading this attribute will always return 0	column	Enumeration	`.1.3.6.1.4.1.14179.2.2.1.1.18`
bsnApIpAddress IP address of the AP. This will not be available when the switch is operating in the Layer2 mode. In this case, the attribute will return 0 as value.	column	SNMPv2-SMIIpAddress	`.1.3.6.1.4.1.14179.2.2.1.1.19`
bsnAPNumOfSlots Number of Radio Interfaces on the Airespace AP. Currently maximum two interfaces are supported. One would be of type 802.11a and other of type 802.11b/g.	column	Integer32	`.1.3.6.1.4.1.14179.2.2.1.1.2`
bsnAPMirrorMode If enabled, then this AP's Client's Data is mirrored and this AP's clients are dynamically added to the switch's mirrored MAC list.	column	Enumeration	`.1.3.6.1.4.1.14179.2.2.1.1.20`
bsnAPRemoteModeSupport This specifies if the the Remote Mode is supported on this AP or not. If supported user can set bsnAPMonitorOnlyMode to remote. Otherwise not.	column	Enumeration	`.1.3.6.1.4.1.14179.2.2.1.1.21`
bsnAPType This is the model of the AP in enumeration. Ap models start with wap are called panda ap models.Ap models ended with different suffix have different functionalities. …	column	Enumeration	`.1.3.6.1.4.1.14179.2.2.1.1.22`
bsnAPSecondaryMwarName sysName of the Airespace Switch which is suppose to be the Secondary MWAR(switch) of the AP with which AP should associate if Primary Switch(configured through bsnAPPrimaryMwarNam…	column	OctetString	`.1.3.6.1.4.1.14179.2.2.1.1.23`
bsnAPTertiaryMwarName sysName of the Airespace Switch which is suppose to be the Tertiary MWAR(switch) of the AP with which AP should associate. If primary,secondary and tertiary switch are not availab…	column	OctetString	`.1.3.6.1.4.1.14179.2.2.1.1.24`
bsnAPIsStaticIP This flag when disabled implies that AP will use DHCP to get the IP address. However, if it is enabled, then user should enter the IPAddress, Netmask and Gateway.	column	Enumeration	`.1.3.6.1.4.1.14179.2.2.1.1.25`
bsnAPNetmask The Netmask of the IP address of the AP.	column	SNMPv2-SMIIpAddress	`.1.3.6.1.4.1.14179.2.2.1.1.26`
bsnAPGateway The Gateway for the AP.	column	SNMPv2-SMIIpAddress	`.1.3.6.1.4.1.14179.2.2.1.1.27`
bsnAPStaticIPAddress The Static IP-Address configuration for the AP. This can only be changed when the LWAPP mode is in Layer-3.	column	SNMPv2-SMIIpAddress	`.1.3.6.1.4.1.14179.2.2.1.1.28`
bsnAPBridgingSupport This specifies if this AP is a Bridging AP. Bridging APs can be used in Bridging or Mesh network configurations.	column	Enumeration	`.1.3.6.1.4.1.14179.2.2.1.1.29`
bsnAPGroupVlanName The AP Group to which this AP has been associated with. If it is empty, then no AP Group overriding has been set.	column	OctetString	`.1.3.6.1.4.1.14179.2.2.1.1.30`
bsnAPIOSVersion IOS Version of IOS Cisco AP. Zero length string will be returned for other APs	column	SNMPv2-TCDisplayString	`.1.3.6.1.4.1.14179.2.2.1.1.31`
bsnAPCertificateType Enum values denoting AP Certificate Type. 1 : manufactureinstalled : Manufacture Installed Certificate type (MIC). 2 : selfsigned : Self Signed Certificate type (SSC). 3 : lo…	column	Enumeration	`.1.3.6.1.4.1.14179.2.2.1.1.32`
bsnAPEthernetMacAddress The Ethernet MAC address of the AP.	column	SNMPv2-TCMacAddress	`.1.3.6.1.4.1.14179.2.2.1.1.33`
bsnAPAdminStatus deprecated Admin State of the AP	column	Enumeration	`.1.3.6.1.4.1.14179.2.2.1.1.37`
bsnAPLocation User specified location of this AP. While configuring AP, user should specify a location for the AP so that its easy to figure out for some one where the AP is located.	column	OctetString	`.1.3.6.1.4.1.14179.2.2.1.1.4`
bsnAPMonitorOnlyMode Monitor Only Mode Setting.	column	Enumeration	`.1.3.6.1.4.1.14179.2.2.1.1.5`
bsnAPOperationStatus Operation State of the AP. When AP associates with the Airespace Switch its state will be associated. When Airespace AP is disassociated from the Switch, its state will be disass…	column	Enumeration	`.1.3.6.1.4.1.14179.2.2.1.1.6`
bsnAPSoftwareVersion Major Minor Software Version of AP	column	SNMPv2-TCDisplayString	`.1.3.6.1.4.1.14179.2.2.1.1.8`
bsnAPBootVersion Major Minor Boot Version of AP	column	SNMPv2-TCDisplayString	`.1.3.6.1.4.1.14179.2.2.1.1.9`