opticalMuxDefForceFwdAsePilotOn

ADVA-FSPR7-DEF-MIB · .1.3.6.1.4.1.2544.1.11.10.3.6.1.1.27
MIB view Table view

Object

column ADVA-FSPR7-TC-MIBFspR7LaserForcedOperation 
Force the BWD Raman pilot on to allow building of FWD Raman ASE Table

Context

MIB
ADVA-FSPR7-DEF-MIB
OID
.1.3.6.1.4.1.2544.1.11.10.3.6.1.1.27
Type
column
Access
readonly
Status
current
Parent
opticalMuxDefEntry
Table
opticalMuxDefTable
Siblings
30

Syntax

ADVA-FSPR7-TC-MIBFspR7LaserForcedOperation
Source
ADVA-FSPR7-TC-MIBFspR7LaserForcedOperation
Base type
Enumeration

Values & Constraints

Type Values
0undefined
1rls
2opr

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
opticalMuxDefRowStatus
RowStatus object is used to create or delete a row in the table.
columnSNMPv2-TCRowStatus.1.3.6.1.4.1.2544.1.11.10.3.6.1.1.1
opticalMuxDefOffset
Sets the offset for the mean optical power for power equalization in ROADM
column0.1 dB Integer32.1.3.6.1.4.1.2544.1.11.10.3.6.1.1.10
opticalMuxDefSwitchCommand
The switch command action for this facility. A command resulting in a switch event will also cause a change of the facility secondary state and a corresponding condition. Addresse…
columnADVA-FSPR7-TC-MIBFspR7APSCommand.1.3.6.1.4.1.2544.1.11.10.3.6.1.1.11
opticalMuxDefAlsMode
Determines the reaction in backward direction in response to a LOS on the same Interface: on a Network Interface connected to the DWDM this is a matter of laser safety
columnADVA-FSPR7-TC-MIBFspR7AlsMode.1.3.6.1.4.1.2544.1.11.10.3.6.1.1.12
opticalMuxDefType
The TYPE defines the transport service type as wrapper with wrapper layer termination OR else as payload
columnADVA-FSPR7-TC-MIBFspR7InterfaceType.1.3.6.1.4.1.2544.1.11.10.3.6.1.1.13
opticalMuxDefAttenuationGradient
Attenuation Gradient Threshold on Receive Fiber. Applies to both TRMT and RCV directions; but threshold violation is reported for each direction separately by the 'tapping' alarms…
column0.1 dB/min Unsigned32.1.3.6.1.4.1.2544.1.11.10.3.6.1.1.14
opticalMuxDefInhibitSwitchToProt
Inhibit Switch to Working. Inhibition blocks a switchInhibit Switch to Protection facility. Inhibition blocksInhibit Switch to Working. Inhibition blocks a switch
columnADVA-FSPR7-TC-MIBFspR7YesNo.1.3.6.1.4.1.2544.1.11.10.3.6.1.1.15
opticalMuxDefVariableGain
Variable Gain of EDFA
column0.1 dB Unsigned32.1.3.6.1.4.1.2544.1.11.10.3.6.1.1.16
opticalMuxDefAdmin
The Administrative State will be displayed in the GUI with full name values; it will be differently displayed in TL1 syntax according to TL1 display rules. The transaction into th…
columnADVA-FSPR7-TC-MIBFspR7AdminState.1.3.6.1.4.1.2544.1.11.10.3.6.1.1.17
opticalMuxDefTimePeriod
NONE - OTDR measurement disabled otherwise the OTDR duration in minutes.
columnADVA-FSPR7-TC-MIBFspR7OtdrPeriod.1.3.6.1.4.1.2544.1.11.10.3.6.1.1.18
opticalMuxDefSigDegThresReceiver
Signal Degrade Threshold on Receiver. Reported as ATTRMT-SDHT to far end.
column0.1 dB SNMPv2-SMIUnsigned32.1.3.6.1.4.1.2544.1.11.10.3.6.1.1.19
opticalMuxDefPumpPower
Total raman pump power
column0.2 dBm Integer32.1.3.6.1.4.1.2544.1.11.10.3.6.1.1.2
opticalMuxDefAlias
User Applied Descriptor
columnSNMP-FRAMEWORK-MIBSnmpAdminString.1.3.6.1.4.1.2544.1.11.10.3.6.1.1.20
opticalMuxDefDataLayerPmReset
Reset data-layer Performance registers
columnADVA-FSPR7-TC-MIBFspR7PmReset.1.3.6.1.4.1.2544.1.11.10.3.6.1.1.21
opticalMuxDefGain
Gain
columnADVA-FSPR7-TC-MIBFspR7Gain.1.3.6.1.4.1.2544.1.11.10.3.6.1.1.22
opticalMuxDefEdfaPwrOut
Optical Output Power Rating - Provision
columnADVA-FSPR7-TC-MIBFspR7EdfaOutputPowerRating.1.3.6.1.4.1.2544.1.11.10.3.6.1.1.23
opticalMuxDefVoaSetpoint
Sets the optical attenuation of VOA
column0.1 dB Unsigned32.1.3.6.1.4.1.2544.1.11.10.3.6.1.1.24
opticalMuxDefFiberBrand
Brand of fiber present in the fiber plant
columnADVA-FSPR7-TC-MIBFspR7FiberBrand.1.3.6.1.4.1.2544.1.11.10.3.6.1.1.25
opticalMuxDefTiltSet
Tilt setting as discrete values versus a range
columnADVA-FSPR7-TC-MIBFspR7TiltSet.1.3.6.1.4.1.2544.1.11.10.3.6.1.1.26
opticalMuxDefBandProvision
Band Provision. Reference to BAND__INVENTORY.
columnADVA-FSPR7-TC-MIBFspR7OpticalBand.1.3.6.1.4.1.2544.1.11.10.3.6.1.1.28
opticalMuxDefOffsetHigh
Sets the high level offset for power equalization in CCM
column0.1 dBm Integer32.1.3.6.1.4.1.2544.1.11.10.3.6.1.1.29
opticalMuxDefInhibitSwitchToWork
Inhibit Switch to Working. Inhibition blocks a switchInhibit Switch to Protection facility. Inhibition blocksInhibit Switch to Working. Inhibition blocks a switch switch to the Pr…
columnADVA-FSPR7-TC-MIBFspR7YesNo.1.3.6.1.4.1.2544.1.11.10.3.6.1.1.3
opticalMuxDefOffsetLow
Sets the low level offset for power equalization in CCM
column0.1 dBm Integer32.1.3.6.1.4.1.2544.1.11.10.3.6.1.1.30
opticalMuxDefOptUpdate
This parameter is used to operate/trigger OPT PM update; it triggers the entity to update its current OPT PM value, which can be retrieved via GET function.
columnADVA-FSPR7-TC-MIBFspR7OptUpdate.1.3.6.1.4.1.2544.1.11.10.3.6.1.1.31
opticalMuxDefForceLaserOn
Laser Forced On
columnADVA-FSPR7-TC-MIBFspR7LaserForcedOperation.1.3.6.1.4.1.2544.1.11.10.3.6.1.1.4
opticalMuxDefAseTabCreation
ASE Table creation in process
columnADVA-FSPR7-TC-MIBFspR7AseTabOpr.1.3.6.1.4.1.2544.1.11.10.3.6.1.1.5
opticalMuxDefOpticalSetPoint
Sets the optical power for power equalization in ROADM or for channel power control in OPCM
column0.1 dBm Integer32.1.3.6.1.4.1.2544.1.11.10.3.6.1.1.6
opticalMuxDefInitiateEqualization
Initiate Equalization
columnADVA-FSPR7-TC-MIBFspR7InitEqualization.1.3.6.1.4.1.2544.1.11.10.3.6.1.1.7
opticalMuxDefTilt
Change of optical channel power in dB over the complete transmission band
column0.1 dB Integer32.1.3.6.1.4.1.2544.1.11.10.3.6.1.1.8
opticalMuxDefOscOpticalSetpoint
Sets the OSC optical power
column0.1 dBm Integer32.1.3.6.1.4.1.2544.1.11.10.3.6.1.1.9