maintainOperationRequest
ADVA-FSP3000ALM-MIB ·
.1.3.6.1.4.1.2544.1.14.6.1.1.1
Object
column
r/w
Enumeration
Set request to initiate OTDR measurement. It can be performed only if portAdminState is in Mgt state except of runOtdrMeasurement (3), runFaultAnalysis (4) and runResetMeanValues (7) which can be performed also if portAdminState is in service.
Context
- MIB
- ADVA-FSP3000ALM-MIB
- OID
.1.3.6.1.4.1.2544.1.14.6.1.1.1- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- maintainEntry
- Table
- maintainTable
- Siblings
- 19
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | none |
2 | runFingerprintGeneration |
3 | runOtdrMeasurement |
4 | runFaultAnalysis |
5 | runFingerprintGpon |
6 | runFingerprintWithoutReflector |
7 | runResetMeanValues |
8 | runFingerprintPes |
9 | runLossCalculationPointUpdate |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| maintainOperationLastError The latest failure of the maintain operation action.
Applicable only when maintainOperationState is set to 'failure'. | column | Enumeration | .1.3.6.1.4.1.2544.1.14.6.1.1.10 |
| maintainOperationNumConnectors Default value is taken from system.lossGuidance | column | Integer32 | .1.3.6.1.4.1.2544.1.14.6.1.1.11 |
| maintainOperationNumSplices Default value is taken from system.lossGuidance | column | Integer32 | .1.3.6.1.4.1.2544.1.14.6.1.1.12 |
| maintainOperationMaxLaserPower Maximal laser power used for Fingerprint generation or OTDR measurement in 0.01dBm.
Parameter must be provided for Fingerprint generation or OTDR measurement. The value '-1'
corre… | column | Integer32 | .1.3.6.1.4.1.2544.1.14.6.1.1.13 |
| maintainOperationOtdrLinkLength Length of the optical link in meters.
Parameter must be provided for OTDR measurement (max. 200000 meters)
and fingerprint without reflector (max. 300000 meters) and must be
great… | column | Integer32 | .1.3.6.1.4.1.2544.1.14.6.1.1.14 |
| maintainOperationOtdrMeasTime Measurement time in seconds. Parameter must be provided
for OTDR measurement.
Not available on 16ALM. | column | Integer32 | .1.3.6.1.4.1.2544.1.14.6.1.1.15 |
| maintainOperationDwdmMode This variable is set to 'enabled' to allow DWDM measurements
else only standard non DWDM measurements can be done. | column | Enumeration | .1.3.6.1.4.1.2544.1.14.6.1.1.16 |
| maintainOperationLossCalculationPoint Loss between the origin of the optical link and the loss
calculation point is used for the bidirectional measurements or
other measurements without reflector. Set to 0 to enable m… | column | Integer32 | .1.3.6.1.4.1.2544.1.14.6.1.1.17 |
| maintainOperationFastMode This variable is set to 'enabled' to activate faster OTDR measurements
with less accuracy. | column | Enumeration | .1.3.6.1.4.1.2544.1.14.6.1.1.18 |
| maintainOperationMonitoringMode This variables decides which measurements method will be used for monitoring. | column | Enumeration | .1.3.6.1.4.1.2544.1.14.6.1.1.19 |
| maintainOperationRefractiveIndex Refractive index multiplied by 1000000. Parameter must be
provided for Fingerprint generation or OTDR measurement. | column | Integer32 | .1.3.6.1.4.1.2544.1.14.6.1.1.2 |
| maintainOperationExpectedLoss Expected loss in tenth of dB. Between 5 and 35 db. Parameter maintainOperationLossCalculationPoint
must be set to 0 for it to be used. | column | Integer32 | .1.3.6.1.4.1.2544.1.14.6.1.1.20 |
| maintainOperationExternalOffset External offset length in meters. Parameter must be
provided for Fingerprint generation or OTDR measurement. | column | Integer32 | .1.3.6.1.4.1.2544.1.14.6.1.1.3 |
| maintainOperationCouplerLoss Coupler loss in tenth of dB. Parameter must be provided
for Fingerprint generation. | column | Integer32 | .1.3.6.1.4.1.2544.1.14.6.1.1.4 |
| maintainOperationOtdrLength Measurement length in meters.
Parameter must be provided for OTDR measurement.
On 16ALM the allowed range is 100..35000. | column | Integer32 | .1.3.6.1.4.1.2544.1.14.6.1.1.5 |
| maintainOperationOtdrPowerLevel Power level in 0.01dBm. Parameter must be provided
for OTDR measurement.
Not available on 16ALM-1650D. | column | Integer32 | .1.3.6.1.4.1.2544.1.14.6.1.1.6 |
| maintainOperationOtdrPulseWidth Pulse width in ns. Parameter must be provided
for OTDR measurement.
On 16ALM the allowed range is 25..1000. | column | Integer32 | .1.3.6.1.4.1.2544.1.14.6.1.1.7 |
| maintainOperationOtdrAverageRate Average rate (0=512,1=1024,2=2048,3=4096,4=8192,5=16384,6=32768,7=65536).
Parameter must be provided for OTDR measurement.
Not available on 16ALM-1650D. | column | Integer32 | .1.3.6.1.4.1.2544.1.14.6.1.1.8 |
| maintainOperationState The current status of a measurement. When
failure is set then maintainOperationLastError is applicable. | column | Enumeration | .1.3.6.1.4.1.2544.1.14.6.1.1.9 |