maintainOperationOtdrLength
ADVA-FSP3000ALM-MIB ·
.1.3.6.1.4.1.2544.1.14.6.1.1.5
Object
column
r/w
Integer32
Measurement length in meters. Parameter must be provided for OTDR measurement. On 16ALM the allowed range is 100..35000.
Context
- MIB
- ADVA-FSP3000ALM-MIB
- OID
.1.3.6.1.4.1.2544.1.14.6.1.1.5- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- maintainEntry
- Table
- maintainTable
- Siblings
- 19
Syntax
Integer32
Values & Constraints
Object Constraints
range: 100-200000
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| maintainOperationRequest Set request to initiate OTDR measurement. It can be performed
only if portAdminState is in Mgt state except of runOtdrMeasurement (3),
runFaultAnalysis (4) and runResetMeanValues … | column | Enumeration | .1.3.6.1.4.1.2544.1.14.6.1.1.1 |
| maintainOperationLastError The latest failure of the maintain operation action.
Applicable only when maintainOperationState is set to 'failure'. | column | Enumeration | .1.3.6.1.4.1.2544.1.14.6.1.1.10 |
| maintainOperationNumConnectors Default value is taken from system.lossGuidance | column | Integer32 | .1.3.6.1.4.1.2544.1.14.6.1.1.11 |
| maintainOperationNumSplices Default value is taken from system.lossGuidance | column | Integer32 | .1.3.6.1.4.1.2544.1.14.6.1.1.12 |
| maintainOperationMaxLaserPower Maximal laser power used for Fingerprint generation or OTDR measurement in 0.01dBm.
Parameter must be provided for Fingerprint generation or OTDR measurement. The value '-1'
corre… | column | Integer32 | .1.3.6.1.4.1.2544.1.14.6.1.1.13 |
| maintainOperationOtdrLinkLength Length of the optical link in meters.
Parameter must be provided for OTDR measurement (max. 200000 meters)
and fingerprint without reflector (max. 300000 meters) and must be
great… | column | Integer32 | .1.3.6.1.4.1.2544.1.14.6.1.1.14 |
| maintainOperationOtdrMeasTime Measurement time in seconds. Parameter must be provided
for OTDR measurement.
Not available on 16ALM. | column | Integer32 | .1.3.6.1.4.1.2544.1.14.6.1.1.15 |
| maintainOperationDwdmMode This variable is set to 'enabled' to allow DWDM measurements
else only standard non DWDM measurements can be done. | column | Enumeration | .1.3.6.1.4.1.2544.1.14.6.1.1.16 |
| maintainOperationLossCalculationPoint Loss between the origin of the optical link and the loss
calculation point is used for the bidirectional measurements or
other measurements without reflector. Set to 0 to enable m… | column | Integer32 | .1.3.6.1.4.1.2544.1.14.6.1.1.17 |
| maintainOperationFastMode This variable is set to 'enabled' to activate faster OTDR measurements
with less accuracy. | column | Enumeration | .1.3.6.1.4.1.2544.1.14.6.1.1.18 |
| maintainOperationMonitoringMode This variables decides which measurements method will be used for monitoring. | column | Enumeration | .1.3.6.1.4.1.2544.1.14.6.1.1.19 |
| maintainOperationRefractiveIndex Refractive index multiplied by 1000000. Parameter must be
provided for Fingerprint generation or OTDR measurement. | column | Integer32 | .1.3.6.1.4.1.2544.1.14.6.1.1.2 |
| maintainOperationExpectedLoss Expected loss in tenth of dB. Between 5 and 35 db. Parameter maintainOperationLossCalculationPoint
must be set to 0 for it to be used. | column | Integer32 | .1.3.6.1.4.1.2544.1.14.6.1.1.20 |
| maintainOperationExternalOffset External offset length in meters. Parameter must be
provided for Fingerprint generation or OTDR measurement. | column | Integer32 | .1.3.6.1.4.1.2544.1.14.6.1.1.3 |
| maintainOperationCouplerLoss Coupler loss in tenth of dB. Parameter must be provided
for Fingerprint generation. | column | Integer32 | .1.3.6.1.4.1.2544.1.14.6.1.1.4 |
| maintainOperationOtdrPowerLevel Power level in 0.01dBm. Parameter must be provided
for OTDR measurement.
Not available on 16ALM-1650D. | column | Integer32 | .1.3.6.1.4.1.2544.1.14.6.1.1.6 |
| maintainOperationOtdrPulseWidth Pulse width in ns. Parameter must be provided
for OTDR measurement.
On 16ALM the allowed range is 25..1000. | column | Integer32 | .1.3.6.1.4.1.2544.1.14.6.1.1.7 |
| maintainOperationOtdrAverageRate Average rate (0=512,1=1024,2=2048,3=4096,4=8192,5=16384,6=32768,7=65536).
Parameter must be provided for OTDR measurement.
Not available on 16ALM-1650D. | column | Integer32 | .1.3.6.1.4.1.2544.1.14.6.1.1.8 |
| maintainOperationState The current status of a measurement. When
failure is set then maintainOperationLastError is applicable. | column | Enumeration | .1.3.6.1.4.1.2544.1.14.6.1.1.9 |