adTAOctAdslConfProfileServiceMode
ADTRAN-TAOCTADSL2-MIB ·
.1.3.6.1.4.1.664.2.432.2.1.1.2
Object
column
r/w
Enumeration
This object is used to provision the ADSL physical line service mode. If the line card is a legacy adsl line card, the multiMode option will allow the ATUC to adapt to the ATUR's mode, assuming it is T1.413, G.dmt, or G.lite. If the line card is adsl2+, the multiMode option allows the ATUC still to adapt to the ATUR's mode, but will attempt to connect up to adsl2+ rates.
Context
- MIB
- ADTRAN-TAOCTADSL2-MIB
- OID
.1.3.6.1.4.1.664.2.432.2.1.1.2- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- adTAOctAdslConfProfileExtEntry
- Table
- adTAOctAdslConfProfileExtTable
- Siblings
- 7
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | multiMode |
2 | t1413 |
3 | gDMT |
4 | gLite |
5 | g9923 |
6 | g9924 |
7 | g9925 |
8 | readsl |
9 | adsl1MultiMode |
10 | g9925AnxM |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| adTAOctAdslConfProfileLineType This object is used to configure the ADSL physical
line type. The object, including enumerations, was
taken from the ADSL Extension MIB as this was the only
variable in the Exten… | column | Enumeration | .1.3.6.1.4.1.664.2.432.2.1.1.1 |
| adTAOctAdslConfProfileIndexApplied This object is used to contain the index of the ADSL
template or profile applied to the line. This index
is used internally to look up a name or description
of the profile. It is … | column | Integer32 | .1.3.6.1.4.1.664.2.432.2.1.1.3 |
| adTAOctAdslConfProfileName This object is used to identify the ADSL template or
profile applied to the line by name. | column | OctetString | .1.3.6.1.4.1.664.2.432.2.1.1.4 |
| adTAOctAdslAtucConfProfileInterleaveMinINP obsolete The minimum amount of impulse noise protection,
measured in steps of 0.5 DMT symbols (250
microseconds per DMT symbol). This is for the
downstream direction.
NOTE: A set here appl… | column | Enumeration | .1.3.6.1.4.1.664.2.432.2.1.1.5 |
| adTAOctAdslAturConfProfileInterleaveMinINP obsolete The minimum amount of impulse noise protection,
measured in steps of 0.5 DMT symbols (250
microseconds per DMT symbol). This is for the
upstream direction. | column | 0.5 DMT symbols Enumeration | .1.3.6.1.4.1.664.2.432.2.1.1.6 |
| adTAOctAdslAtucConfProfileInterleaveMinInpRev2 The minimum amount of impulse noise protection,
measured as 0 DMT symbols, 0.5 DMT symbols (250
microseconds per DMT symbol), or 1-16 DMT symbols.
This is for the downstream direc… | column | Enumeration | .1.3.6.1.4.1.664.2.432.2.1.1.7 |
| adTAOctAdslAturConfProfileInterleaveMinInpRev2 The minimum amount of impulse noise protection,
measured as 0 DMT symbols, 0.5 DMT symbols (250
microseconds per DMT symbol), or 1-16 DMT symbols.
This is for the upstream directi… | column | Enumeration | .1.3.6.1.4.1.664.2.432.2.1.1.8 |