adGenMiniDslam3gInfoFanNumber
ADTRAN-TAMINIDSLAM3G-MIB ·
.1.3.6.1.4.1.664.6.10000.61.5.1.1.1.1.5
Object
column
Integer32
Fan number on the fan tray. This object is intended to be returned only as a varbind for a notification, therefore reading this variable is normally undefined.
Context
- MIB
- ADTRAN-TAMINIDSLAM3G-MIB
- OID
.1.3.6.1.4.1.664.6.10000.61.5.1.1.1.1.5- Type
- column
- Access
- readonly
- Status
- current
- Parent
- adGenMiniDslam3gInfoEntry
- Table
- adGenMiniDslam3gInfoTable
- Siblings
- 13
Syntax
Integer32
Values & Constraints
Object Constraints
range: 1-99
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| adGenMiniDslam3gInfoUserTempThresh User temperature threshold in degrees
celcius. | column | Integer32 | .1.3.6.1.4.1.664.6.10000.61.5.1.1.1.1.1 |
| adGenMiniDslam3gInfoMCastSessionControlEndIP The last Multicast IP Address in a range of IP addresses
that are used by the Multicast Session Control. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.664.6.10000.61.5.1.1.1.1.10 |
| adGenMiniDslam3gInfoMCastSessionControlBitrate Used to set the bitrate associated with the multicast IP address range
of the Multicast Session Control. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.664.6.10000.61.5.1.1.1.1.11 |
| adGenMiniDslam3gInfoMacAgingTime Used on the switch to determine how long to wait before MAC table
entries are removed from the table. If 0 is specified, then the
switch will learn and lock each MAC address. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.664.6.10000.61.5.1.1.1.1.12 |
| adGenMiniDslam3gInfoLegacyDeployment Used to enable or disable the
Legacy Deployment provisioning for a third generation DSLAM
to work under a TA1x00. | column | Enumeration | .1.3.6.1.4.1.664.6.10000.61.5.1.1.1.1.13 |
| adGenMiniDslam3gInfoBondingMode Used to determine the provisioned bonding mode on products that can
not suppot ATM and EFM bonding simultaneously. | column | Enumeration | .1.3.6.1.4.1.664.6.10000.61.5.1.1.1.1.14 |
| adGenMiniDslam3gInfoUserTempTrapEnable Used to enable or disable the
adGenMiniDslamShelfUserTempActive trap. | column | Enumeration | .1.3.6.1.4.1.664.6.10000.61.5.1.1.1.1.2 |
| adGenMiniDslam3gInfoDspWarmStartEnable Used to enable or disable the DSP warm start
function. | column | Enumeration | .1.3.6.1.4.1.664.6.10000.61.5.1.1.1.1.3 |
| adGenMiniDslam3gInfoCurrentTemp Current temperature of the shelf
in degrees celcius. | column | Integer32 | .1.3.6.1.4.1.664.6.10000.61.5.1.1.1.1.4 |
| adGenMiniDslam3gInfoDspWarmStartReason Reason that a DSP was reset. This object
is intended to be returned only as a
varbind for a notification, therefore
reading this variable is normally undefined. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.664.6.10000.61.5.1.1.1.1.6 |
| adGenMiniDslam3gInfoDownstreamRateLimitPriority Sets the priority threshold for downstream rate limiting.
Downstream traffic is rate limited up to the VID specified.
Traffic which is tagged with a higher priority than what is
s… | column | Integer32 | .1.3.6.1.4.1.664.6.10000.61.5.1.1.1.1.7 |
| adGenMiniDslam3gInfoCircuitIdChanges This object is intended to be returned only as a varbind
for the adGenMiniDslamAdslCircuitIdChange notification below.
This object is a comma delimited list of all … | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.664.6.10000.61.5.1.1.1.1.8 |
| adGenMiniDslam3gInfoMCastSessionControlStartIP The first Multicast IP Address in a range of IP addresses
that are used by the Multicast Session Control. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.664.6.10000.61.5.1.1.1.1.9 |