adTa5kSmExtAType
ADTRAN-TA5K-SM-MIB ·
.1.3.6.1.4.1.664.2.750.2.1.1.15
Object
column
deprecated
r/w
Enumeration
Select which type the External clock A input should expect.
Context
- MIB
- ADTRAN-TA5K-SM-MIB
- OID
.1.3.6.1.4.1.664.2.750.2.1.1.15- Type
- column
- Access
- readwrite
- Status
- deprecated
- Parent
- adTa5kSmProvEntry
- Table
- adTa5kSmProvTable
- Siblings
- 28
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | bitsD4 |
2 | bitsOD |
3 | composite |
4 | composite8kHz |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| adTa5kSmNode The TA5000 node number. Valid set values are 1..n, where n is adTa5kSmMaxNodes.
adTa5kSmNode will return 0 if the node number has not been set. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.664.2.750.2.1.1.1 |
| adTa5kSmNetworkName This is a string that can be bound to this topology. | column | OctetString | .1.3.6.1.4.1.664.2.750.2.1.1.10 |
| adTa5kSmTopologyChangeCount If the topology of the network changes this number will be incremented. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.664.2.750.2.1.1.11 |
| adTa5kSmTopologyInstance Used to index the Tlv table, each time this is called it
creates an instance for that viewer to read bulk data. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.664.2.750.2.1.1.12 |
| adTa5kSmLoopASource deprecated Designate which slot the LoopA Timing source will listen on. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.664.2.750.2.1.1.13 |
| adTa5kSmLoopBSource deprecated Designate which slot the LoopB Timing source will listen on. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.664.2.750.2.1.1.14 |
| adTa5kSmExtBType deprecated Select which type the External clock B input should expect. | column | Enumeration | .1.3.6.1.4.1.664.2.750.2.1.1.16 |
| adTa5kSmUpstreamChaining deprecated Enable/Disable Net1 port for redundancy chaining protection.
adTa5kUpstreamChaining has been replaced by adTa5kSmPortMode
beginning with TA5000 System Release 4.0. | column | Enumeration | .1.3.6.1.4.1.664.2.750.2.1.1.17 |
| adTa5kSmDownstreamChaining deprecated Enable/Disable Net2 port for redundancy chaining protection.
adTa5kDownstreamChaining has been replaced by adTa5kSmPortMode
beginning with TA5000 System Release 4.0. | column | Enumeration | .1.3.6.1.4.1.664.2.750.2.1.1.18 |
| adTa5kSmFallbackClock deprecated Select the fallback timing source for the system | column | Enumeration | .1.3.6.1.4.1.664.2.750.2.1.1.19 |
| adTa5kSmUplink deprecated 0 = None
1 - 22 = Slot number assignment
23 = Peer (Used by a special Facility Protect Mode, not used)
24 = Uplink is located on an expansion shelf
25 = Network port 1
26 = Networ… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.664.2.750.2.1.1.2 |
| adTa5kSmExtAQuality deprecated Select the quality for External Clock A. | column | Enumeration | .1.3.6.1.4.1.664.2.750.2.1.1.20 |
| adTa5kSmExtBQuality deprecated Select the quality for External Clock B. | column | Enumeration | .1.3.6.1.4.1.664.2.750.2.1.1.21 |
| adTa5kSmExtAPreference deprecated This object has been replaced by adTa5kSmExtAPriority. | column | Integer32 | .1.3.6.1.4.1.664.2.750.2.1.1.22 |
| adTa5kSmExtBPreference deprecated This object has been replaced by adTa5kSmExtBPriority. | column | Integer32 | .1.3.6.1.4.1.664.2.750.2.1.1.23 |
| adTa5kSmUseHopCount deprecated Enable or disable the hop count in SM timing messages. | column | Enumeration | .1.3.6.1.4.1.664.2.750.2.1.1.24 |
| adTa5kSmIGMPInterfaceMode This item controls processing of IGMP packets. | column | Enumeration | .1.3.6.1.4.1.664.2.750.2.1.1.25 |
| adTa5kSmSTagTPID The S-Tag TPID. The value is intended to be displayed as a hexadecimal number. | column | Integer32 | .1.3.6.1.4.1.664.2.750.2.1.1.26 |
| adTa5kSmExtAPriority deprecated Select the priority for External Clock A.
Set adTa5kSmExtAPriority to 0 to use the
node number as the priority. Override this
default behavior by setting a value from 1 to 255. | column | Integer32 | .1.3.6.1.4.1.664.2.750.2.1.1.27 |
| adTa5kSmExtBPriority deprecated Select the priority for External Clock B.
Set adTa5kSmExtBPriority to 0 to use the
node number as the priority. Override this
default behavior by setting a value from 1 to 255. | column | Integer32 | .1.3.6.1.4.1.664.2.750.2.1.1.28 |
| adTa5kSmInternalSTag S-Tag returned for internal data/configuration traffic. | column | Integer32 | .1.3.6.1.4.1.664.2.750.2.1.1.29 |
| adTa5kSmAggregation Enabling this setting will allow both net1 and net2 to operate as a single link | column | Enumeration | .1.3.6.1.4.1.664.2.750.2.1.1.3 |
| adTa5kSmBpRateAlarmSeverityLevel Provision the severity level of BpRateFallback alarm. | column | Enumeration | .1.3.6.1.4.1.664.2.750.2.1.1.30 |
| adTa5kSmPrimaryClock deprecated Select the primary timing source for the system | column | Enumeration | .1.3.6.1.4.1.664.2.750.2.1.1.4 |
| adTa5kSmSecondaryClock deprecated Select the secondary timing source for the system | column | Enumeration | .1.3.6.1.4.1.664.2.750.2.1.1.5 |
| adTa5kSmCurrentClock deprecated Read-Only: Displays which clock is currently in use by the system | column | Enumeration | .1.3.6.1.4.1.664.2.750.2.1.1.6 |
| adTa5kSmClockModeRevertive deprecated Enabling this allows the clock to fail back to the primary should the primary source's
health return to normal. Disabled means the clock will remain on the secondary source after… | column | Enumeration | .1.3.6.1.4.1.664.2.750.2.1.1.7 |
| adTa5kSmForceClockFailover deprecated Writing a value to this will cause the clock source to failover, a get will always return 1 | column | Enumeration | .1.3.6.1.4.1.664.2.750.2.1.1.8 |