adTa5kSmClockModeRevertive

ADTRAN-TA5K-SM-MIB · .1.3.6.1.4.1.664.2.750.2.1.1.7
MIB view Table view

Object

column deprecated r/w Enumeration 
Enabling this allows the clock to fail back to the primary should the primary source's
health return to normal.  Disabled means the clock will remain on the secondary source after
a failover.

Context

MIB
ADTRAN-TA5K-SM-MIB
OID
.1.3.6.1.4.1.664.2.750.2.1.1.7
Type
column
Access
readwrite
Status
deprecated
Parent
adTa5kSmProvEntry
Table
adTa5kSmProvTable
Siblings
28

Syntax

Enumeration

Values & Constraints

Enumerated Values
1enabled
2disabled

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
adTa5kSmNode
The TA5000 node number. Valid set values are 1..n, where n is adTa5kSmMaxNodes. adTa5kSmNode will return 0 if the node number has not been set.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.664.2.750.2.1.1.1
adTa5kSmNetworkName
This is a string that can be bound to this topology.
columnOctetString.1.3.6.1.4.1.664.2.750.2.1.1.10
adTa5kSmTopologyChangeCount
If the topology of the network changes this number will be incremented.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.664.2.750.2.1.1.11
adTa5kSmTopologyInstance
Used to index the Tlv table, each time this is called it creates an instance for that viewer to read bulk data.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.664.2.750.2.1.1.12
adTa5kSmLoopASource deprecated
Designate which slot the LoopA Timing source will listen on.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.664.2.750.2.1.1.13
adTa5kSmLoopBSource deprecated
Designate which slot the LoopB Timing source will listen on.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.664.2.750.2.1.1.14
adTa5kSmExtAType deprecated
Select which type the External clock A input should expect.
columnEnumeration.1.3.6.1.4.1.664.2.750.2.1.1.15
adTa5kSmExtBType deprecated
Select which type the External clock B input should expect.
columnEnumeration.1.3.6.1.4.1.664.2.750.2.1.1.16
adTa5kSmUpstreamChaining deprecated
Enable/Disable Net1 port for redundancy chaining protection. adTa5kUpstreamChaining has been replaced by adTa5kSmPortMode beginning with TA5000 System Release 4.0.
columnEnumeration.1.3.6.1.4.1.664.2.750.2.1.1.17
adTa5kSmDownstreamChaining deprecated
Enable/Disable Net2 port for redundancy chaining protection. adTa5kDownstreamChaining has been replaced by adTa5kSmPortMode beginning with TA5000 System Release 4.0.
columnEnumeration.1.3.6.1.4.1.664.2.750.2.1.1.18
adTa5kSmFallbackClock deprecated
Select the fallback timing source for the system
columnEnumeration.1.3.6.1.4.1.664.2.750.2.1.1.19
adTa5kSmUplink deprecated
0 = None 1 - 22 = Slot number assignment 23 = Peer (Used by a special Facility Protect Mode, not used) 24 = Uplink is located on an expansion shelf 25 = Network port 1 26 = Networ…
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.664.2.750.2.1.1.2
adTa5kSmExtAQuality deprecated
Select the quality for External Clock A.
columnEnumeration.1.3.6.1.4.1.664.2.750.2.1.1.20
adTa5kSmExtBQuality deprecated
Select the quality for External Clock B.
columnEnumeration.1.3.6.1.4.1.664.2.750.2.1.1.21
adTa5kSmExtAPreference deprecated
This object has been replaced by adTa5kSmExtAPriority.
columnInteger32.1.3.6.1.4.1.664.2.750.2.1.1.22
adTa5kSmExtBPreference deprecated
This object has been replaced by adTa5kSmExtBPriority.
columnInteger32.1.3.6.1.4.1.664.2.750.2.1.1.23
adTa5kSmUseHopCount deprecated
Enable or disable the hop count in SM timing messages.
columnEnumeration.1.3.6.1.4.1.664.2.750.2.1.1.24
adTa5kSmIGMPInterfaceMode
This item controls processing of IGMP packets.
columnEnumeration.1.3.6.1.4.1.664.2.750.2.1.1.25
adTa5kSmSTagTPID
The S-Tag TPID. The value is intended to be displayed as a hexadecimal number.
columnInteger32.1.3.6.1.4.1.664.2.750.2.1.1.26
adTa5kSmExtAPriority deprecated
Select the priority for External Clock A. Set adTa5kSmExtAPriority to 0 to use the node number as the priority. Override this default behavior by setting a value from 1 to 255.
columnInteger32.1.3.6.1.4.1.664.2.750.2.1.1.27
adTa5kSmExtBPriority deprecated
Select the priority for External Clock B. Set adTa5kSmExtBPriority to 0 to use the node number as the priority. Override this default behavior by setting a value from 1 to 255.
columnInteger32.1.3.6.1.4.1.664.2.750.2.1.1.28
adTa5kSmInternalSTag
S-Tag returned for internal data/configuration traffic.
columnInteger32.1.3.6.1.4.1.664.2.750.2.1.1.29
adTa5kSmAggregation
Enabling this setting will allow both net1 and net2 to operate as a single link
columnEnumeration.1.3.6.1.4.1.664.2.750.2.1.1.3
adTa5kSmBpRateAlarmSeverityLevel
Provision the severity level of BpRateFallback alarm.
columnEnumeration.1.3.6.1.4.1.664.2.750.2.1.1.30
adTa5kSmPrimaryClock deprecated
Select the primary timing source for the system
columnEnumeration.1.3.6.1.4.1.664.2.750.2.1.1.4
adTa5kSmSecondaryClock deprecated
Select the secondary timing source for the system
columnEnumeration.1.3.6.1.4.1.664.2.750.2.1.1.5
adTa5kSmCurrentClock deprecated
Read-Only: Displays which clock is currently in use by the system
columnEnumeration.1.3.6.1.4.1.664.2.750.2.1.1.6
adTa5kSmForceClockFailover deprecated
Writing a value to this will cause the clock source to failover, a get will always return 1
columnEnumeration.1.3.6.1.4.1.664.2.750.2.1.1.8